Search 5,000,000+ questions and answers.

Frequently Asked Questions

Will the scanner work on a MICROSOFT WINDOWS 3.x or DOS system?

KODAK:FAQ:KODAK PhotoDoc Color Scanner
This new 32-bit device driver only operates on a computer that has the WINDOWS 95 Operating System installed.
Related Questions

How can I break out of a Windows 3.x boot into DOS?

Windows 3.1 FAQ
If you press the F8 key during the message "MS-DOS is started..." is displayed, you are switched in the step-by-step boot process and are able to suppress the Windows start. Program Manager has a limitation on the number of groups that you can create. You are also limited to 40 Program Items per group. Remove a group/item, and try again. The install should work successfully. Look in the [windows] section of your 'win.ini' file.
Related Questions

Will your software work with Windows 3.x?

The Aquila Software FAQ Page - A Bravenet.com Faq
All of our software is full 32 bit and therefore will not run under windows 3.x. However, it is fully compatible with Windows 95, Windows 98 and Windows NT.
Related Questions

Q2: How do I install the PC Card Reader software for DOS and Windows 3.x?

ISA Bus PC Card Readers FAQ [PCM-CR-I2IX], Synchrotech
For CardTalk: Boot to a DOS prompt. Insert the CardTalk Diskette into the A: drive and at the A:\ prompt, type 'install' and follow the instructions. For CardWizard Pro: Go into windows and type 'a:\setup' from Program Manager on the Run command line <enter key> and follow the instructions. On reboot, the card service lines should display two driver letters. It might go too fast so press the 'F8' key when you see 'Starting MS-DOS.' This might take more then once to catch it on time.
Related Questions

Q8: In DOS, Windows 3.x or Win 95/98 there is only one socket or letter. How do I get two?

ISA Bus PC Card Readers FAQ [PCM-CR-I2IX], Synchrotech
Turn off the computer and check the power and ribbon cables for misalignment. Also, reset the ISA card and all the cables. Reboot the computer. If 2 drives still don't appear, switch the ISA card ribbon cable. Put the top ribbon cable on the bottom of the ISA card and the bottom cable on the top of the card. If this does not correct the problem, set the cables back to the original configuration.
Related Questions

Will WinCue work with Winamp 3.x?

WinCue - Frequently Asked Questions
No. Because of the major changes in how plug-ins work from version 2.x to 3.x of Winamp WinCue will not work with Winamp 3.x.
Related Questions

Q. Do you plan to support 16-bit operating systems, such as MS Windows 3.x , 2.x or DOS?

Oxygen Software :: Oxygen Phone Manager - PC software for No...
A. We don't plan to support these, a bit, outdated operating systems, as these operating systems are too slow for the data synchronization between the phone and PC. A. We don't plan to support these operating systems In the most nearest future. But, of course, we will think about implementing such support. However, we don't have such expansions even in plans yet. A. Yes! We support MS Windows 2003 service since version 2.1.5.
Related Questions

Why is the compiler DOS based, not Windows?

HI-TECH Software Frequently Asked Questions
Well, firstly we are developing a Windows user interface. This will be Win-32, i.e. it will run under Windows 95 and Windows NT. But since the compiler is a non-graphical application, and the DOS interface runs quite happily under all flavours of Windows already, it has not been as high a priority as making sure that the basic functionality is top-notch. In other words, we believe an excellent compiler with a DOS front-end is better than an average compiler with a Windows front end.
Related Questions

Will the scanner function properly on MICROSOFT WINDOWS NT Operating System?

KODAK:FAQ:KODAK PhotoDoc Color Scanner
The PhotoDoc Version 1.5 Software release has operated successfully on several WINDOWS NT 4.0 systems. A WINDOWS NT 4.0 driver is available from the Kodak Web Site http://www.kodak.com/global/en/software/photoDocDrivers.shtml. This downloadable driver contains the PhotoDoc TWAIN and Troubleshooter modules only. Note: While we have tested this version with WINDOWS NT 4.0, the WINDOWS NT platform remains unsupported. This software may or may not work with your WINDOWS NT 4.
Related Questions

Will Picture Easy Software ever work on WINDOWS 98, WINDOWS 3.x or MACINTOSH Systems?

KODAK:FAQ:KODAK Picture Easy Software 3.0
WINDOWS 98 is supported by Picture Easy 3.02 or higher. There are no plans to support WINDOWS 3.x or MACINTOSH Systems.
Related Questions

How do I access pure DOS mode in Windows XP?

Windows XP FAQ Frequently Asked Questions - Bootstrike.Com
Windows XP does not have pure DOS mode, the only two ways are to execute "CMD"(preferred) or "COMMAND" from the run dialog box. If you want the real pure one, you can boot up from a DOS/Win95/98/ME boot disk or create one using Windows XP itself (insert a diskette, right click the drive in My Computer, Format, check Make System Disk) or you can install 2 OS's (like Windows 95/98/ME, which allows you to access pure DOS).
Related Questions

Can I configure my system to boot Windows 9x/ME/2000/NT x.x and DOS?

DOS FAQ by Christoph Fuchs
Sure, you can. Create a primary partiton BEFORE your Windows partition (e.g. with PartitionMagic) and get a boot manager (I use the german tool 'Bootmanager', you can get a free trial version at http://www.bootmanager-pro.de).
Related Questions

TIP] - Keeping Up With Microsoft Windows.....WHY ?

Music Book Deluxe FAQs
WE HAVE FOUND THAT UN-UPDATED WINDOWS PC'S ATTRIBUTE TO MOST OF OUR TECHNICAL SUPPORT CALLS - WHEN IT COMES TO INSTALL/UPGRADE PROBLEMS. **** UPGRADE MICROSOFT - This option varies from Windows Platform and the icon is not always located in the same spot. Usually it is located at the top of the Start Button and is called Windows Update. The updates can also be located at the following web address. http://windowsupdate.microsoft.
Related Questions

How is Microsoft Windows Server 2003 different from Microsoft Windows 2000?

Frequently Asked Questions About MCSE
The Microsoft Windows Server 2003 family takes the best of Microsoft Windows 2000 Server technology and makes it easier to deploy, manage, and use. For more information, see the Microsoft Windows Server 2003 Web site. Microsoft has developed independent certification requirements for Windows Server 2003. The certification requirements for Microsoft Certified Systems Engineer (MCSE) on Windows Server 2003 differ from those for MCSE on Windows 2000.
Related Questions

How do I install Windows XP in DOS mode [or from MS-DOS command prompt]?

Windows XP FAQ Frequently Asked Questions - Bootstrike.Com
First, start up SmartDrive to speed things up. Next, run WINNT from the I386 folder. Setup should launch, warn you if you don't have SmartDrive loaded, copy the cd to a temporarily to your hard disk and reboot your computer. A more detailed guide.
Related Questions

Where do I get drivers for Windows 3.x or NT?

Princeton Digital (USA) Corp. | Support
There are no monitor drivers written and is not necessary for your monitor to work. The inf files are used in Windows 95, 98, 2000, and XP. As long as you have the 3.x drivers for your video card, simply set up the refresh rates using the timing guide in the monitor manual as a reference. Please contact your video card vendor for assistance.
Related Questions

Can Windows 95 really work with only 4 MB of RAM as Microsoft claims?

Light Relief
It's true! However, we caution you not to try to run any programs under this configuration. In fact, it's best if you don't turn the machine on at all.
Related Questions

Will iPhone work with my PC and Microsoft Windows?

TechnoPark: iPhone FAQ. Some basic questions answered
That means, there is no support for Windows 98, Windows ME or Windows NT. There is no official wordings about Linux support.]
Related Questions

What is the difference between COMMAND and CMD DOS Virtual Machine in Windows XP?

Windows XP FAQ Frequently Asked Questions - Bootstrike.Com
Posted in Bootstrike Forums by wmccain] Windows XP includes TWO command-line processors, CMD.EXE and COMMAND.COM. The second one, COMMAND.COM, is a stripped-down version of the command processor from DOS. The Windows XP version of COMMAND.COM is severely restricted in its capabilities (lacks long filename support and many other features familiar from Windows 98SE), so it is all-but-unusable. Furthermore, it turns out that there are TWO ways to run CMD.
Related Questions

Can I reboot into DOS with Windows XP?

Paul Thurrott's SuperSite for Windows: Windows XP ("Whi...
No. Windows XP is not based on DOS, as is Windows 9x. However, Windows XP does support a DOS-like command line environment, and you can run most DOS applications--and even many DOS games--in Windows XP. Windows XP also supports an optional boot-time command line environment called the Recover Console. As its name suggests, the Recovery Console is only designed to be used in the event of a system problem. To enable it, insert your Windows XP CD-ROM and type
Related Questions

Why would I want an outdated DOS palmtop when I could get a modern Windows CE machine?

HPLX.NET FAQs: THE FAQ
The 200LX may be a few years old, but it is a far better computing device than any Windows CE machine. A few of its strengths: Pocket Quicken built in (keep track of your finances without spending any extra money for the financial software)
Related Questions

Why won't the DOS software work under Windows NT/2000/XP?

Frequently Asked Questions
You should be able to use Maxim's GUI software under NT/2000/XP with the NT drivers supplied. I haven't been able to test this myself, however. I read this cartridge - why is the ROM different to the version I downloaded? (The checksum is fine.) Make sure the ROM is the correct size, and not an overdump (i.e containing more data than was in the original ROM).
Related Questions

My modem works in DOS, why won't it work in WINDOWS?

Frequently Asked Questions
Most commonly, the com ports in windows have not been configured properly. To do this, go to the "CONTROL PANEL" in Windows. Select "PORTS". Highlight the comport that the modem is set for. Choose "SETTINGS". Adjust the baud rate as necessary, but do not set the baud rate above 9,200 bps. Select "ADVANCED". Choose the appropriate Base I/O Port Address and IRQ Settings. Choose "OK". A "Your Windows COM Settings Have Changed..
Related Questions

Will my USB CDRW work in NT 4.0 , DOS, Windows 3.1 and Windows95 or Windows CE?

Addonics: Support: FAQs: Pocket CD-RW/Mobile CD-RW
USB is not a supported technology in DOS, Windows 3.1, or NT 4.0. Windows95 did not originally support USB. The patch does allow USB support in 95 but is not stable enough to run the CD-ROM. At the present time, there aren't any Windows CE drivers for USB. Make sure that the computer has PCMCIA support installed. When you insert the driver it will report what it detects. To mount the drive type in MOUNT /DEV/HD? /MNT/CDROM. '?' is the location of the drive when it's detected on the IDE Bus.
Related Questions

What is DOS?

DOS FAQ by Christoph Fuchs
DOS is a Disk Operating System, that means it's an OS that uses a disk. Operating systems for IBM PCs since the early 1980s were called DOS. DOS consists of the command prompt, mostly command.com and two kernelfiles. That's a basic DOS system. DOS was a mainstream OS until Windows 95 (which also uses DOS, btw) threw it off the market.
Related Questions

What is the difference between Microsoft Windows AntiSpyware (Beta) and Windows Defender?

Frequently asked questions about Windows Defender
Windows Defender is the name of the next version of Microsoft Windows AntiSpyware. It includes several enhancements that are based on customer input. Changes include, but are not limited to: Improved detection and removal. Windows Defender can detect and remove more threats posed by spyware and other potentially unwanted software. Real-Time Protection, which helps prevent unwanted software from being installed, is enhanced to better monitor key points in the operating system for changes.
Related Questions

Why won't MICROSOFT PUBLISHER work with my scanner since I installed PhotoDoc Software version 1.5?

KODAK:FAQ:KODAK PhotoDoc Color Scanner
The PhotoDoc scanner with version 1.5 software does not work with MICROSOFT PUBLISHER 97 unless you just do a simple Scan and Transfer. This means when you enter the PhotoDoc Twain window, click on Scan and Transfer without doing a prescan and then a Select or Enhance. To solve the problem you need to un-install version 1.5 Software and re-install version 1.0 or 1.0.1. Perform a custom installation of the PhotoDoc Software, de-selecting CAERE OMNIPAGE Limited Edition Software.
Related Questions

Does Windows include Microsoft Office, and if not can you supply it?

Office does not come as standard with any Microsoft Operating system. We don't stock or supply any software... our specialisation is in hardware. Again, if you require software, we recommend you search for it on eBay (simply enter "Microsoft Office" as your search keywords). We are unable to change the Operating System advertised. If a unit is advertised with a specific Operating System, it's because it is prelicensed with it, so we are unable to change it to a different one.
Related Questions

Is Microsoft Windows XP available in multiple languages?

ActiveWin.com: Frequently Asked Questions - Windows XP "...
Windows XP Professional will be available in 24 official localized versions in addition to English. In any version of Windows XP Professional, you can display, input, edit, and print documents in hundreds of languages. Users or administrators can set regional preferences, fonts, keyboard layouts, sorting orders, date formats, and so on.
Related Questions

Got A Question? Ask Our Community!


More Questions >>

© Copyright 2007-2008 QueryCAT
About • Webmasters • Contact