How do I detect if my PC has a Sound Card?
FAQIn the list you get, click on "Sound, view and game controllers". If you don't see anything related to SOUND, click on "Refresh". The detection will start. If you still don't get anything related to sound, Bad luck... : (. You don't have it.
Related QuestionsWindows does not detect the PC Card when installed. What can I do?
NetgateWindows 98/ME/2000/XP might not detect the PC Card if a previous installation of the PC Card was cancelled before it was finished. Remove the previous driver, and redo the installation again.
Related QuestionsCan I have more than one sound card?
Answers To Frequently Asked QuestionsWith the current sound driver it's possible to have several SoundBlaster, SoundBlaster/Pro, SoundBlaster16, MPU-401 or MSS cards at the same time on the system. Installing two SoundBlasters is possible but requires defining the macros SB2_BASE, SB2_IRQ, SB2_DMA and (in some cases) SB2_DMA2 by editing local.h manually. It's also possible to have a SoundBlaster at the same time as a PAS16. With the 2.0 and newer kernels that configure sound using make config, instead of local.
Related QuestionsWill it work without a sound card?
Starship Titanic Frequently Asked Questions - now with XP su...No. The sound is an essential part of the game, and ST will refuse to run without sound support as described in 2.1.
Related QuestionsWill the SignaLink work with my computer and sound card?
SignaLink FAQThe SignaLink SL-1 and SL-1+ only pass audio signals to and from the sound card, so they will work with ANY sound card that has a microphone input and a speaker output. The SignaLink Model SL-1+ also works sound card Line Input and Line Output jacks for greater flexibility. What you should really be asking is if the software will work with your computer and sound card.
Related QuestionsSubject: [5-21] How do I connect two drives to one sound card in a PC?
Automatically change and resize the desktop wallpaper at any...The purchase of a CD recorder often results in what used to be an unusual situation: a machine with two CD-ROM drives in it. This leads to a number of interesting phenomena, usually having to do with poorly-written software that can't figure out which CD-ROM drive it's supposed to use. CD-ROM drives are typically connected to a sound card via a small cable (a couple of wires twisted together, ending in small molex connectors).
Related QuestionsCan I use any PC Sound Card as a MIDI interface?
RSD's Frequently Asked Questions - Theatre Sound Design & Sh...We have discovered that some are better than others, though. If you seem to be getting MIDI data errors, try using a different sound card. Use a sound card or mainboard with proven Windows XP sound and MIDI drivers which are fully 48kHz sample rate compatible. The Creative Sound Blaster PCI 16 card is acceptable.
Related QuestionsCan an ultra sound scan detect everything?
General Ultrasound Frequently Asked QuestionsUltrasound does have its limitations. It cannot identify bone and air so regions such as the lungs, stomach,bowel and bones are better examined using different methods that may require the use of radiation.
Related QuestionsWhat should I do if I detect a virus on my PC or over the network?
Town of Mashpee, MA - Computer Virus FAQ'sIf your company employs an MIS manager or systems administrator, and you are uncertain if the virus resides in your computer memory or on a floppy disk, leave your PC on and immediately notify them of a possible problem. They will be able to best evaluate how to proceed. If you suspect the virus is residing in your computer memory (RAM) and you are connected to a network, immediately turn off your computer and notify your MIS manager or systems administrator.
Related QuestionsWhy doesn't my PC seem to detect the EzClone?
AllSupport.netIn order for your PC to acknowledge the EzClone, you must firs press the "RUN"button for approximately 5-7 seconds. Once all three LED lights on the front panel of the EzClone light, you may then connect it via USB. This step ensures that the EzClone is switching to Exteranl Writer Mode. If it still does not work, make sure the USB Storage driver was installed for a Win 98SE system. Or try another computer to verify that there is any driver which was mistakenly removed.
Related QuestionsAll my games can't detect OpenGL [and, or] Glide for my video card?
Windows XP FAQ Frequently Asked Questions - Bootstrike.ComWindows XP's drivers are basic ones that just allow you to manipulate the desktop (and possibly DirectX also). You have to get updated XP drivers from your card's manufacturer. Riva TNT, TNT2, Geforce cards can try nVidia's Forceware drivers. dfx has closed down. Fortunately, some geeks have hacked (or tweaked) 3dfx's original drivers to make it compatible with Windows XP.
Related QuestionsMy computer does not have a sound card. How can I complete this program?
OIO Side BarThe course has the capabilities of displaying the audio as text. Simply click the CC button on the bottom left hand corner to display the text.
Related QuestionsHow do I check the sound on my PC-to-Phone?
Sky Telecom AKA The Phone Card WarehouseIf you are having difficulty hearing or you can not be heard, please check that your Microphone and Speakers are plugged in and operational. You may also adjust the volume settings on your PC-to-Phone by sliding the controls for the speaker and microphone icons towards the right to increase, or towards the left to decrease the sound level. If the speaker setting is on Mute, you will not be able to hear the other party.
Related QuestionsMy PC has no sound – what should I check?
PC Repair Dublin PC Laptop PC Repair Hard Drive Recovery rep...Verify that the speakers are plugged into the line “out” or “spkr” port of the sound card. Verify the transformer for the speaker is plugged into an electrical outlet on one end and into the speakers on the other end. Check the mixer settings. Is mute selected or are the volume settings too low? Increase the master volume setting. If the sound card has a “diagnose” file on the installation disk, use this diagnose utility to check the sound card.
Related QuestionsWelcome to phonewala.comYou may adjust the settings on your Dialer by sliding the levers next to the speaker and microphone icons towards the '+' sign to increase, or towards the microphone or speaker image to decrease the sound level. If the speaker setting is on Double-click the speaker icon in the lower-right corner of your screen and adjust the settings for Play/Record controls as described below. Go to 'Options/Properties' and be sure the 'Show volume controls for' checkbox is selected.Related Questions
PlaylistIf this is a networking problem, what is your networking configuration? (And note this addresses most networking issues.) On Vista: open the Start menu. Click All Programs. Select "Maintenance". Select "Problems Reports and Solutions". Click "View Problem History". Look for the crash/error in question. Double-click the report in question. What is that data? (You can use "Copy to Clipboard" to easily include this data in your message.Related Questions
Are there other possibilities than standard VGA card to connect a workstation monitors to PC ?
ePanorama.net - CircuitsSome manufacturers make special grpahcis cards for PCs which allow PC to be succesfully used with fixed frequency monitors. Fixed Frequency Video FAQ at http://www.devo.com/video/ has more information on those cards which make is possible to use fixed frequency monitor as general purpose PC monitor.
Related QuestionsWhat is the difference between the MPR5000, MPR6000 and MPR7000 PC Card products?
WJ Communications - RFID Frequently - Asked QuestionsThe MPR5000 and the MPR6000 utilize the same RFID reader engine. The MPR5000 is a 1/2 watt reader that has an integrated antenna for mobile applications. The MPR6000 is the same reader without an integrated antenna; it has two antenna ports with MMCX jacks for applications that require external antennas. The MPR7000 is a 1 watt reader that has two MMCX connectors and can only be used in serial communications mode.
Related QuestionsWhy doesn't my computer detect my Dolphin ISA card?
Dolphin Peripherals, LLC. Support - FAQs - ISA Bus Serial an...All Dolphin ISA Bus cards are non-Plug and Play, you must take the following steps to install the windows drivers: Click the Windows "Start" button > click "Settings" > click "Control Panel" > double click on "Add New Hardware" and let Windows do an automatic search. At the end of the search a "Details" button should pop up, click it. Finish the install.
Related QuestionsWhy doesn't my sound come from PC speakers now ?
FAQSometimes during the set up the USB connected Netphone overrides the default sound card so all your sound comes out of the Netphone The most likely cause is that you are behind a firewall or have some firewall software running (eg ZoneAlarm). You need to either shut off your firewall or have your PC expert configure your firewall to accept incoming calls to the phone.
Related QuestionsWhy does JUMP sound so bad on my PC?
Hard Note Software - JUMP Music Composition Software / MIDI ...By default, JUMP uses the General MIDI synthesizer that's included with most PCs. Unfortunately, some of these are of rather poor quality. One very common software synthesizer suffers from timing problems (see Troubleshooting for tips on how to work around these problems). Better results can be obtained by using other software synthesizers (via a Virtual MIDI Cable) or external MIDI hardware.
Related QuestionsWhy can't I detect my device using ActiveSync on my PC?
FAQ - JASJAMSome personal firewalls may prevent Activesync from detecting your device, especially when using high security configurations. If that does not work, please check that the correct version, 4.1 or higher, of Microsoft Activesync is installed on your PC/laptop and that USB or Bluetooth connections are enabled (ActiveSync > File > Connection Settings > "Allow USB Connections" or "Allow Connections to one of the following COM").
Related QuestionsWhat can I do if I turn on my PC, but the system BIOS cannot detect the hard drive?
F A QPlease refer to the Hardware Installation Procedure & Hard Drive Format Procedure in the Quick Installation Guide and make sure the storage devices have been installed successfully. The SOHOTANK ST5610 series is a series of external storage devices, except for a specific model, ST5610-4S-WABC, which features RAID 0. Combining with an external eSATA II RAID CARD, ST5610-4S-S2 can work as a high-performance and reliable RAID system.
Related QuestionsWhat competitor PC security programs does CA detect during the installation process?
Insight Broadband :: PC SecurityListed below are competitor products that will prevent individual components of CA Internet Security Suite 2007 from installing if they exist on your PC. During the installation process, these components will be identified at which time you will have the option to remove them from your PC. Failure to remove any competitor security components could prevent installation of CA Internet Security Suite 2007.
Related QuestionsWhy is it that my computer does not detect Xmod when I plug it into my Mac/PC?
Most of the time, Xmod would be detected as a default. However if it is not, please follow the steps below. Connect speakers or earphones as described in your Creative Xmod User's Guide to enjoy the X-Fi™ experience! After you have connected Xmod to your computer, you may need to set Xmod as your computer's default playback and recording device. Click Start -> Control Panel -> Sounds and Audio Devices. The Sounds and Audio Devices Properties dialog box appears.
Related QuestionsWhy can I only hear effects from certain output ports of my multi-output sound card?
Cakewalk - Frequently Asked QuestionsThere is a workaround for this issue. If you don't have audio tracks assigned to the same output ports as your effects loop, you must have a "dummy" track in Cakewalk assigned to the same port as the effects loop instead. That dummy track must contain an audio event, even if it's a recording of silence. (Back to top)
Related QuestionsHow can I reduce noise picked up by my sound card?
Answers To Frequently Asked QuestionsUsing good quality shielded cables and trying the sound card in different slots may help reduce noise. If the sound card has a volume control, you can try different settings (maximum is probably best). Using a mixer program you can make sure that undesired inputs (e.g. microphone) are set to zero gain. Philipp Braunbeck reported that on his ESS-1868 sound card there was a jumper to turn off the built-in amplifier which helped reduce noise when enabled.
Related Questions