Search 5,000,000+ questions and answers.

Frequently Asked Questions

What if my meter is not measuring my energy consumption correctly?

The Energy Shop - for cheap gas prices and cheap electricity...
If you think there is a problem with your meter, rather than your bill (which could be an estimate) you should first contact your supplier. They will be able to test your meter to ensure that it is working properly. If you are still concerned about the meter's accuracy you should direct your enquiry to energywatch who should be able to offer you advice on how to resolve the matter.
Related Questions

What is the energy consumption of a Luminous SkyCeiling?

FAQ
A Luminous SkyCeiling with T-5 fluorescent light boxes consumes approx. 7 watts per sq. ft. A Luminous SkyCeiling with RFfreeLux LED light boxes consumes approx. 4 watts per sq. ft. [back to top]
Related Questions

What is the vehicle energy consumption?

Questions That Should Frequently be Asked
This is half of the range equation. It measures energy use per mile due to drive system losses, aerodynamic drag, rolling resistance, and accessory requirements. Typical units are watt-hours per mile (Wh/mi). Even more than mpg in a conventional car, this number depends on how, and how fast you drive. Again, results at 70 mph are more representative than results from a lazy-day test cycle. Efficient EVs operate in the 150 - 250 Wh/mi range.
Related Questions

What is the energy consumption of the Battery Brain?

Battery Brain + FAQ's
The Battery Brain uses 10 Milli Ampere during normal operation, after disconnecting the load from the battery, the consumption is zero for type I and next to zero for all others types.
Related Questions

Will this program reduce my energy consumption?

Idaho Power - Energy Center - Energy Efficiency - A/C Cool C...
Probably not. The program is designed to shift demand to non-peak hours to better utilize capacity, much like encouraging workers to commute at off-peak times to lessen the total number of vehicles using the highway system at the same time. During the test program most participants used their A/C units later in the evening and consumed the energy not used during cycling.
Related Questions

What about the energy-consumption of a Heliostat?

EGIS - Heliostat
After sun-fall and during the night till sunrise normally a standby power of 16 watts is needed, (230 V AC), just as in the 20 seconds between the individual mirror-fixes. The motors are actuated after 20 seconds respectively for only about 100 ms! For this very short period a consumption of only max. 50 watt appears. All in all much less than a small electric bulb.
Related Questions

What is energy consumption of BK-12000-SS plant?

BIOMAC CORPORATION SDN BHD
Energy consumption is 25 kw per hour. This is almost the same whether you are creating at maximum capacity filling the rector tank with 1000 liter feedstock, or just filling it up with 300 liter feedstock. Best is to use maximum capacity per batch to consume as little energy per liter as possible.
Related Questions

What is the energy measuring range for He-3 neutron detector in the Model 935?

BNC | FAQ | Model 935 SAM | Frequently Asked Questions (FAQs...
The SAM measures neutrons of all energies. It is more sensitive for slow neutrons such as those associated with Sensitive Nuclear Materials (SNMs). The detector sensitivity specification is 12.7cps/nV, the units of n are neutrons/cc, V is velocity in cm/sec. Multiplying this out yields neutrons/cm squared.
Related Questions

What can I do if I suspect my water meter is not working correctly?

Folkestone and Dover Water Services Ltd - Your Home - Freque...
Water meters seldom go wrong. However, if you think that your water meter might not be working correctly we can run a test on your meter to see whether it is operating within the prescribed limits of acceptable error. If the tests reveal your meter is faulty there will be no charge but if we find that your meter is operating correctly, there will be a charge for this service. Please contact us to request a test if you suspect your water meter is faulty. Water meters seldom go wrong.
Related Questions

What should I do if I think my water meter has not been read correctly?

City of Soledad - Frequently Asked Questions
Call the Utilities Department (831) 678 - 3963 Ext. 123 between 8 a.m. and 5 p.m. Monday through Friday.
Related Questions

Is it possible that the meter can malfunction and not register correctly?

Sanitary Engineer
Yes and no, the meter provides for an accurate reading. However, if the meter is to error, it will not function and your reading will actually be less than what you actually used.
Related Questions

What are you measuring?

Do> Campaign - FAQ
We want to see better awareness that the small bits of activity things matter. We want better awareness about the goal of physical activity. We want to see people being more active, more often. That won't happen overnight, but we're looking for progress.
Related Questions

How do I know that I am measuring length, width and height correctly?

Zerust_FAQ
Width is measured from edge to edge. If it is a slit seal bag measure inside seal to inside seal or inside seal to fold. Remember, every application is unique; the following information is intended to provide general information and guidelines. Please call our Technical Service Team at 763-225-6600 to discuss your specific need. In most cases, desiccants and oil are not necessary when the part is protected with Zerust® / Excor®.
Related Questions

Vapor / Volatile Corrosion Inhibitors - FAQ
Width is measured from edge to edge. If it is a slit seal bag, measure inside seal to inside seal or inside seal to fold.
Related Questions

How do I know my meter is accurately reading my water consumption?

ROGERS WATER UTILITIES - Frequently Asked Questions
Rogers Water Utilities has a program to regularly check the meters in the system for accuracy. If you have a sudden change in your consumption for no apparent reason (out of town, houseguests, watering the lawn or garden) contact RWU. We are only human and sometimes we make mistakes. Usually, when a meter fails, it begins to run slower, not faster. [Return]
Related Questions

Why does my meter still record electrical consumption when no one is at home?

Utilities Kingston - Electricity FAQ
Many appliances that we have in our homes today still consume electric power while we are away. We may not notice them using electricity, because they are silent. Here is a list of a few items your home may have that use power while you're away: aquariums, block heaters, dehumidifiers, cordless phones, answering machines, furnace fan motors, freezers, pumps, refrigerators, security systems, television sets, waterbeds, and water heaters.
Related Questions

How accurate is the instantaneous fuel consumption meter?

NITROD - Frequently Asked Questions (FAQs)
It is most accurate (within a few percent) when the fuel system is operating in closed loop. When the fuel system operates under this state, the ECU does a really good job at keeping the air/fuel mixture close to the ideal ratio of 14.7:1. This air/fuel ratio is where the catalytic converter operates at its peak efficiency and therefore, lowers emissions. The measurement, on the other hand, becomes less accurate (but still meaningful) when the fuel system is in open-loop state.
Related Questions

What are some examples of how I can save energy with a smart meter?

Toronto Hydro-Electric System Limited -- Smart Meter FAQs
By practising the following conservation measures, your household will be at the forefront of Ontario's conservation culture:
Related Questions

How to find the meter constant for energy measurement in ELF meter?

Conzerv-Support-FAQ-ELF
IEC 61036 suggests having some mechanism of measuring energy at faster speed to find the accuracy. Generally manufacturers will have POP LED which blink faster than the display / counter update. Since ELF meters have instantaneous information along with integrated information, we can directly see the accuracy by looking at instantaneous parameter. Generally, for accuracy, the reading is taken for at least 400 pulses at external laboratory where the source is not stable for class 1 meter.
Related Questions

Are all XO Energy Drinks safe for Consumption?

XO Pure Premium Still Energy Drinks - FAQ
Scientific testing has been performed by the various agencies in ITALY and by our XO Thailand producer of all the XO 7 flavors formulas made by the highest quality ingredients supplied from Japan, Germany, France and Denmark were approved for consumption for every person worldwide.
Related Questions

What charges other than charges for energy consumption do I have to pay the utility ?

Frequently Asked Questions (FAQ)
Apart from energy charge you will have to pay a customer charge, electricity duty, meter rent and demand charge (to be calculated on recorded maximum demand or 80% or contract demand for consumers under two part tariff).
Related Questions

How can I save on Energy consumption and water useage when I wash my cloth nappies?

FAQ : Cuddly-Bub Online Store, Baby Products
The cost of washing cloth nappies is minimal compared to the thousands of dollars you would through in the rubbish bin with disposables, and there are even ways that you can make a difference to the washing costs, financially and environmentally when washing cloth nappies! The only financial change you could make when using disposable nappies is to change them less frequently - and risk giving your baby nappy rash or an infection - or buy a cheaper brand which is not always the most cost effecti.
Related Questions

How can I know my consumption, battery condition and energy level?

Motorino Electric Scooters and Morcycles
The MOTORINO™ scooters dashboard has an indicator showing at any time the consumption current and the current you are generating while breaking. Another indicator shows the percentage of the energy left in the battery.
Related Questions

How can a planner include M-WRG in the energy consumption calculation?

Warum lüften? - Dezentral.info
Answer: Home ventilation is taken into account in the calculation of yearly heating energy requirements. It is recommended to consider ventilation devices according to DIN 4701-10.Exact data from the producer can be used and the values for the devices and so also for the yearly primary energy summary are better and more exact.
Related Questions

How does Enerwise retrieve energy consumption data?

Enerwise Global Technologies - Quick Company FAQs
Enerwise retrieves interval data through a variety of sources, including FTP file transfer from host utilities or customers, integration to the utility-grade meter using MV-90 protocol, or via the addition of a shadow metering or recorder device. The specific source utilized will depend on the type of meter currently installed at the location, the accessibility to the host utility meter and communication interfaces.
Related Questions

Will defective appliances or equipment impact my energy consumption?

FAQs
Improperly working appliances or equipment are usually less efficient energy users than their properly working counterparts. Learn more in the Tips to Reduce Your Costs section of our Web site.
Related Questions

Is energy labelling a bit like the fuel consumption of a car?

About NICER - The National Irish Centre for Energy Rating
In some ways, very much so - the car mpg information tells you the consumption for 'urban', 'extra urban' and 'combined' cycles - and everybody knows these are comparative only, that gentle drivers will achieve better and aggressive ones far less. The energy label is also comparative: like cars, some folk will 'drive' their house harder, some will hardly heat it at all. The energy label, however, has pollution in mind, so the scale starts at zero as the best - no energy needed, so no pollution.
Related Questions

Is fuel consumption the only benefit if I use Caltex Havoline Energy in my car?

Havoline.com: Products: EAME: FAQ
No, the engine will receive complete protection against starting friction and wear, heat stress, and engine deposits. Because of the reduced fuel consumed, fewer harmful exhaust emissions are produced. Caltex Havoline Energy is also compatible with catalysts where fitted, preventing untimely catalyst degradation and maintaining control of exhaust emissions. So users of Caltex Havoline Energy are also helping the environment.
Related Questions

How would one reduce energy consumption by 60 to 80 percent?

FAQ about climate change
There are basically two ways, short of drastically reducing population itself: energy rationing or energy taxes. Rationing means a political allocation, with governments and bureaucrats deciding who may use energy and who may not. Energy taxes are almost as unpalatable; just try to picture $5-per-gallon gasoline.
Related Questions

How do I know my water meter is working correctly?

Coachella Valley Water District - Frequently Asked Questions
Each meter used by CVWD must meet the high standards of the American Water Works Association and must be accurate within 1.5 percent in order to pass inspection. When meters do fail, usually due to excessive wear or corrosion, the result is water moving through the meter undetected, causing an inaccurately low reading.
Related Questions

Got A Question? Ask Our Community!


More Questions >>

© Copyright 2007-2008 QueryCAT
About • Webmasters • Contact