Check that the volume control is up on your computer. Our programs automatically start with sound on (a mute button is provided), so if you still don't have sound send an e-mail to help@mypathtv.com.

Firstly ensure you have selected the same input that you have used to connect the external equipment to the receiver. For example you will need to select the DVD input on the receiver if you have connected the DVD player to the input labeled DVD on the back of the receiver. If you have connected the video output from your equipment (e.g. DVD player) directly to your TV ensure you have selected the correct AV channel on the TV.

The preview function in Cinematize is designed to help you locate the portion you want to extract, not to act as a full player. As a result, you can only preview video, not audio. Once you extract the segment, you will get both the video and the audio. You get this error message when you try to use Cinematize with an encrypted DVD. Most of the commercial DVDs available today are protected with Content Scrambling System (CSS) encryption.

If you download the latest divx encoder software, then most often the problem will be fix. If not get the Nimo Package, it usually fix these probem. Visit the help page section for more info. This usuallly happen when there is incompatiblity in version between the movie file and the decoder software. Get the Nimo Package or Tsunami will most likely resolve the problem.

This may be due to the cables being plugged in incorrectly. Please verify that the White/Yellow/Red cables are plugged into the appropriate color coded ports on the source and the TV.

If you are using a Creative Labs AWE 43 or 64 sound card, the audio playback quality will be poor if full-duplex mode is enabled. This is a condition caused by the Creative Labs Driver. The audio is recorded in 16-bit, but will only play back in 8-bit as long as the full-duplex mode is enabled. Once you make a recording, choose Options | Audio | Advanced and uncheck the "Enable Simultaneous Record/Playback" item.

Check your sound card and speaker connections, make sure you have the most current driver for your sound card.

kX Audio Driver fully supports GSIF specification. There are currently two GSIF driver sub-sets: VxD and WDM-based. Since kX Audio Driver is a WDM driver, it supports WDM GSIF only. Under certain circumstances, this causes certain compatibility problems with GSIF-aware applications (such as GigaStudio and GigaSampler), especially under Windows 9x / Millenium. Please upgrade your Giga application (and install any patches available from Tascam).

The phone’s memory may have become corrupt and can be fixed by rebooting the phone. If this does not work, delete pairing information and pair again.

What is the scratching sound I hear when I drive off in my Touareg? 4. Known Issues and Troubleshooting

It has been suggested that the quiet scratching sound that is heard when you drive off in the Touareg is part of the security system. Specifically, it may be the Immobilizer system reading the transponder in the key.

It's a good question with many answers! FIRSTLY - the TriAxis can be set up with many different sounds - make sure that the sounds within the unit are what you like - a simple statement, but unless you know how to change them with memory dumps, then it's twiddle time on the front controls. Unfortunately that is probably NOT the way to do things - the sounds you hear will be dependent on the other items in your rack including the amp used.

In Windows Media Player, make sure codec installer is turned on. From the menu bar select Tools/Options/Player/Auto Upgrade/Enable automatic codec download Your connection speed is too slow. If you are connecting using a 28.8 modem, your connection speed is too slow to view Stocking Videos. If you are accessing video from overseas, you may be experiencing slow response or packet loss in the delivery of video.

Most of the time this is because your computer, though try as it might, just cannot process all the data necessary to redraw the picture 24-30 frames per second and manage the sound as well. This happens most often if you are watching a movie in full screen on a computer that meets minimum requirements, but not the recommended ones. Revisit the system requirements.

The mute button may be pressed or the volume lowered too far. If the volume indicator appears on your screen with none of the bars selected, press the mute button again. Other wise, press the vol+ button

When you click the preview button, you are viewing the video using the QuickTime MPEG-2 Playback component, and this only works with video, not with audio. Once you extract the segment, you will get both the video and the audio.

Yes. The sound masking sound is audible if you listen for it. However, sound masking has been designed to be as inconspicuous as possible. The sound masking system is specially tuned to reduce any variation in the sound volume across the office space, so that the masking is uniformed. Also, it does not contain any variations or patterns which can be consciously recognized. The system uses pink noise which is very soothing and pleasant. It sounds similar to lightly blowing air.

The ear is the organ used to detect sound in humans and some animals. The ear consists of three major sections: the outer ear, middle ear, and inner ear. The external section of the ear consists of a cartilage flap called the pinna. The pinna’s size and shape are used as a transformer to match the impedance of the sound wave entering the ear canal by gradually funneling the wave’s sound energy into the ear.

Check to make sure that your speakers and/or headphones are plugged in and the volume is turned up. For PC users make sure that your mute box is unchecked. You can adjust the volume by dragging the volume slide bar. For Mac users, you can adjust the volume by hitting the volume keys on the keyboard.

Internet Explorer privacy setting = Medium (click Start - Control Panel - Internet Options - Privacy tab)

I can only see the black screen/the graphics is messed up/the game says my video card is not VESA compatible/no SVGA card is found.

There is a workaround for this issue. If you don't have audio tracks assigned to the same output ports as your effects loop, you must have a "dummy" track in Cakewalk assigned to the same port as the effects loop instead. That dummy track must contain an audio event, even if it's a recording of silence. (Back to top)

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

Some Windows Media files (such as the streaming video in the courses) may not play correctly on Mac OS X computers without downloading the Flip4Mac player (free) from the Microsoft web site. After downloading the free player, the course streaming video plays correctly in the Safari browser. Some video files may not play correctly on Mac OS X computers without downloading the free DivX codec from the QuickTime Components page or the DivX web site.

Very soon we will have several sound clips in RealAudio™ format available for you to listen to online. Check back often!

NEVER IGNORE THE SOUND OF A SMOKE ALARM. If the smoke alarm is sounding its alarm, there is a reason. You and your family must be able to escape quickly and safely. Here are several steps your family can learn and rehearse for an emergency: B. Feel if the door is hot. Always feel the door to see if it is hot before opening It to escape. If the doorknob or door is hot, do not use that exit. Use your alternate exit to escape. C. Crawl on the floor.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.