If you are using a Creative Labs AWE 43 or 64 sound card, the audio playback quality will be poor if full-duplex mode is enabled. This is a condition caused by the Creative Labs Driver. The audio is recorded in 16-bit, but will only play back in 8-bit as long as the full-duplex mode is enabled. Once you make a recording, choose Options | Audio | Advanced and uncheck the "Enable Simultaneous Record/Playback" item.

Check your sound card and speaker connections, make sure you have the most current driver for your sound card.

Check that the volume control is up on your computer. Our programs automatically start with sound on (a mute button is provided), so if you still don't have sound send an e-mail to help@mypathtv.com.

kX Audio Driver fully supports GSIF specification. There are currently two GSIF driver sub-sets: VxD and WDM-based. Since kX Audio Driver is a WDM driver, it supports WDM GSIF only. Under certain circumstances, this causes certain compatibility problems with GSIF-aware applications (such as GigaStudio and GigaSampler), especially under Windows 9x / Millenium. Please upgrade your Giga application (and install any patches available from Tascam).

The phone’s memory may have become corrupt and can be fixed by rebooting the phone. If this does not work, delete pairing information and pair again.

What is the scratching sound I hear when I drive off in my Touareg? 4. Known Issues and Troubleshooting

It has been suggested that the quiet scratching sound that is heard when you drive off in the Touareg is part of the security system. Specifically, it may be the Immobilizer system reading the transponder in the key.

It's a good question with many answers! FIRSTLY - the TriAxis can be set up with many different sounds - make sure that the sounds within the unit are what you like - a simple statement, but unless you know how to change them with memory dumps, then it's twiddle time on the front controls. Unfortunately that is probably NOT the way to do things - the sounds you hear will be dependent on the other items in your rack including the amp used.

In Windows Media Player, make sure codec installer is turned on. From the menu bar select Tools/Options/Player/Auto Upgrade/Enable automatic codec download Your connection speed is too slow. If you are connecting using a 28.8 modem, your connection speed is too slow to view Stocking Videos. If you are accessing video from overseas, you may be experiencing slow response or packet loss in the delivery of video.

Yes. The sound masking sound is audible if you listen for it. However, sound masking has been designed to be as inconspicuous as possible. The sound masking system is specially tuned to reduce any variation in the sound volume across the office space, so that the masking is uniformed. Also, it does not contain any variations or patterns which can be consciously recognized. The system uses pink noise which is very soothing and pleasant. It sounds similar to lightly blowing air.

The ear is the organ used to detect sound in humans and some animals. The ear consists of three major sections: the outer ear, middle ear, and inner ear. The external section of the ear consists of a cartilage flap called the pinna. The pinna’s size and shape are used as a transformer to match the impedance of the sound wave entering the ear canal by gradually funneling the wave’s sound energy into the ear.

Check to make sure that your speakers and/or headphones are plugged in and the volume is turned up. For PC users make sure that your mute box is unchecked. You can adjust the volume by dragging the volume slide bar. For Mac users, you can adjust the volume by hitting the volume keys on the keyboard.

Internet Explorer privacy setting = Medium (click Start - Control Panel - Internet Options - Privacy tab)

I can only see the black screen/the graphics is messed up/the game says my video card is not VESA compatible/no SVGA card is found.

There is a workaround for this issue. If you don't have audio tracks assigned to the same output ports as your effects loop, you must have a "dummy" track in Cakewalk assigned to the same port as the effects loop instead. That dummy track must contain an audio event, even if it's a recording of silence. (Back to top)

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

Some Windows Media files (such as the streaming video in the courses) may not play correctly on Mac OS X computers without downloading the Flip4Mac player (free) from the Microsoft web site. After downloading the free player, the course streaming video plays correctly in the Safari browser. Some video files may not play correctly on Mac OS X computers without downloading the free DivX codec from the QuickTime Components page or the DivX web site.

Very soon we will have several sound clips in RealAudio™ format available for you to listen to online. Check back often!

NEVER IGNORE THE SOUND OF A SMOKE ALARM. If the smoke alarm is sounding its alarm, there is a reason. You and your family must be able to escape quickly and safely. Here are several steps your family can learn and rehearse for an emergency: B. Feel if the door is hot. Always feel the door to see if it is hot before opening It to escape. If the doorknob or door is hot, do not use that exit. Use your alternate exit to escape. C. Crawl on the floor.

Firstly ensure you have selected the same input that you have used to connect the external equipment to the receiver. For example you will need to select the DVD input on the receiver if you have connected the DVD player to the input labeled DVD on the back of the receiver. If you have connected the video output from your equipment (e.g. DVD player) directly to your TV ensure you have selected the correct AV channel on the TV.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

NEVER IGNORE THE SOUND OF A SMOKE ALARM. If the smoke alarm is sounding its alarm, there is a reason. You and your family must be able to escape quickly and safely. Here are several steps your family can learn and rehearse for an emergency: Feel if the door is hot. Always feel the door to see if it is hot before opening It to escape. If the doorknob or door is hot, do not use that exit. Use your alternate exit to escape. Crawl on the floor. Smoke from a fire rises and so does the temperature.

There are several possible reasons why you are not hearing any sound. First, make sure that the system you are using has a sound card installed. Some library computers are not equipped with a sound card. If it is, make sure that your system is not set to mute and that you adjust any volume control. Finally, users with a 56k dialup are encouraged to use the audio only versions since this appears to be a bandwidth problem.

First, please see the minimum requirements for the site to function properly. Second, if you meet these requirements, check to ensure that the volume of your computer is turned on.

check audio driver assignment in menu options -> general : MixVibes can use another audio driver (and out) than the main if you see no level : - check the path of your files. If you have entered only a relative path (name of the file without the path) and change current directory then the file cannot be found at next play. If you want to use relative path, you can set init directory at menu File/Options/Setting.