Will there be products which support both ATA on MMC and CE-ATA?
CE-ATAthis time, there are no known conflicts which would disallow support of both interfaces within a device. It is expected though that support within the device would be based on host implementations and OEM requirements.
Related QuestionsAre there different applications for CE-ATA and ATA on MMC devices?
CE-ATAATA on MMC is targeted to allow ATA devices, including hard drives to attach to a broad set of existing MMC hosts. Version 1.0 of ATA on MMC Specification makes minimal changes to existing MMC commands to accomplish ATA command transfers in order to be as compatible as possible with existing host implementations. The result is that ATA on MMC Specification ver. 1.0 is suitable for the application of ATA devices in a larger base of existing hosts, but is not necessarily optimized for efficiency.
Related QuestionsAre there key advantages for developing CE-ATA instead of ATA on MMC and vice versa?
CE-ATAThe key advantage for using CE-ATA is performance, including better command efficiency and a defined interrupt mechanism. The key advantage initially for using ATA on MMC is the potential to connect to a broader range of existing hosts.
Related QuestionsWhich ATI products support MMC 8.1?
Multimedia Center™ 8.1MMC 8.1 runs on all built by ATI Radeon™ cards, and All-in-Wonder® cards from the Radeon™ to the 9700 PRO.
Related QuestionsWhat is CE-ATA?
CE-ATACE-ATA is based on the MMC electrical interface, also using an optimized subset of the ATA command set to improve performance for multimedia applications in handheld and consumer electronic devices.
Related QuestionsWhen are products expected that implement the CE-ATA specification?
CE-ATAAnnouncements of product support and availability is handled by the respective companies. However, we anticipate that products supporting the new technology may emerge as early as the second half of 2005.
Related QuestionsHow is CE-ATA different than Serial ATA and why is Serial ATA not being pursued for this?
CE-ATASerial ATA is a high performance disk interface designed for mainstream computing applications. Handheld and consumer devices have a different set of technical requirements including modest transfer rates and maximum power efficiency. As a result of these unique characteristics, CE-ATA is focused on defining solutions for highly cost-effective integration and maximum power efficiency that will facilitate the incorporation of digital storage into handheld and consumer electronic products.
Related QuestionsWhat is the maximum MMC size that the N-Gage can support?
Nokia N-Gage FAQ - Bootstrike.ComReports are that it can support up to 2GB. However, please note that the performance as well as battery life degrades with the space as searching through the whole MMC takes time. Personally 512mb is the preferred size. You can find 512mb and 1gb cards at Amazon.
Related QuestionsCan the N-Gage support Kingston's MMC Plus cards?
Nokia N-Gage FAQ - Bootstrike.ComThere are positive and negative reviews out there. I recommend sticking with normal MMC cards as no one as reported speed increases with the new cards.
Related QuestionsWhat operating systems support MMC 8.1?
Multimedia Center™ 8.1MMC 8.1 runs on Windows® XP, Windows® 2000, and Windows® ME. In addition, Microsoft® DirectX® 9 is recommended.
Related QuestionsWhat is MMC?
MICRODIA | Flash Memory CardsThe Multi Media Card was introduced Nov. 5, 1997. The Multi Media Card weighs less than two grams and is the size of a postage stamp. Targeted initially at the digital camera and handheld device markets, other markets have also emerged to take advantage of the small size, solid-state data storage solution. The packaging is a simple molded package with a seven pad (pin) serial interface.
Related QuestionsMarjorie Milner College (MMC) (www.mmcollege.edu.au) provides excellence in education since 1946. MMC is an Accredited College with the Government Office of Training and Tertiary Education (Department of Education and Training). The college holds the national CRICOS registration (with Commonwealth of Australia) – 02548C, which enables students from all over the world to study MMC courses.Related Questions
When was CE-ATA announced and what was the driving factor behind this initiative?
CE-ATACE-ATA was publicly announced in September 2004 at the Intel Developer Forum by a group of industry-leading companies specializing in various market segments. Discussions among these companies revealed a common question regarding the necessity of addressing storage in consumer electronics.
Related QuestionsAre there different levels of membership for the CE-ATA Workgroup?
CE-ATACompanies interested in participating in the Workgroup today may join as an Adopter or Contributor. While the development and definition of CE-ATA is in process, a company can benefit most from participating as a Contributor. Adopter status usually applies to companies joining after the specification has been completed; contributor status is no longer applicable. The Promoter Group was established by the companies that spearheaded the start of the CE-ATA effort.
Related QuestionsIs CE-ATA also compatible with other small form factor standard interfaces, such as SD?
CE-ATAThe CE-optimized storage interface is designed to support the MMC electrical interface. Currently, there are no provisions in the architecture to support other electrical interface standards. The disposition of whether the CE-ATA interface specification will accommodate other interfaces in subsequent revisions will be determined in the future as needed by the handheld and consumer electronics industries.
Related QuestionsIs there agreement that MMCA and the CE-ATA Workgroup should have alignment on a HDD interface?
CE-ATAThe MMCA Board and CE-ATA Promoter Group have agreed to provide enough guidance between the two groups such that further divergence of the two specifications is avoided. Alignment discussions between the two organizations are ongoing, however, there are not any specific plans at this time to develop a single document encompassing the content from both groups. The primary reason for two specifications is that each was formed to serve a slightly different purpose.
Related QuestionsWhere can I get support for Halo PC and CE?
Gearbox Software -Support for Halo PC can be found at the Microsoft site for Halo PC: Microsoft Support . Support for Halo CE can be found on the Gearbox Software forums.
Related QuestionsWhich operating systems support Ultra ATA?
Ultra ATA FAQMost Current Linux Distributions Support Ultra ATA. Check the Linux Ultra-DMA Mini-Howto at (http://metalab.unc.edu/LDP/HOWTO/mini/Ultra-DMA.html) for more information. Windows 95, Windows NT, & OS/2 Warp 4.0 all support Ultra ATA when accompanied with current UDMA drivers. MacOS does not currently support Ultra ATA, as no current Apple computers are UDMA compatible. Contact Apple (www.apple.com) for more information.
Related QuestionsAre your products CE compliant?
Motion Sensors, Inc. - For Magnetic and Custom Sensors, Elec...Standard VR and RF sensors are passive devices and as such do not require a CE marking. Much like a resistor or a capacitor, the sensor is seen as a component and does not require any CE certification until it is put into a system. Motion Sensors does, however, manufacture and sell products containing electronic components, as well as stand-alone analog and preamplifier boards for which we have obtained CE certification.
Related QuestionsWhy is there no CE Marking on Ergotron products?
General FAQThe CE marking may only be placed on a product that falls under one or more of the directives that address the basis for placing a CE marking on a product. Ergotron arm and pivot products do not fall under the definition of machinery as defined in directive BS EN 292 of CE or any other directives.
Related QuestionsHow do you support your products?
Frequently Asked QuestionsWe don't have a written warrantee, but we will replace anything defective within a reasonable period. After all, the amount of time that people take to complete their kits varies immensely. We have replaced pieces 5 years old. Can I get names of people who have built your kits? Of course. We can frequently find someone right in your area so that you can look at the "real thing" locally. Most owners are willing to talk at length about their experience.
Related QuestionsWhat Protocols Do the MPR Products Support?
WJ Communications - RFID Frequently - Asked QuestionsThe MPR Series RFID Cards currently support EPC Class 0/0+, EPC Class 1 and EPC Gen 2. ISO 18000-6B and others can be added at a later date. User downloadable utility programs allow upgrades for new capabilities and features.
Related QuestionsDo you support SD/CF/memory stick/MMC/etc.?
VistaBase & Blog Archive & Windows ReadyBoost FA...Mostly. In Beta 2, we added support for a small number of SD/CF cards on internal USB2 & PCIe busses. RC1 has a much broader support range.
Related QuestionsDo SD, CF, MMC and other types of flash support ReadyBoost?
SupportUnfortunately external card readers are not supported, so in general only USB drives support ReadyBoost. We recommend you use only a Super Talent RBST USB drive that is designed for and tested with ReadyBoost.
Related QuestionsQ4: How can users assure compliance of the MMC with their products?
MMCA: Technical FAQA4: The MMCA has a compliance program, allowing vendors to certify their products as fully compliant with the MMCA System Specifications. Compliant cards can then include the MMC trademarked symbol on their products.
Related QuestionsWhat does the term MMC mean?
Support: Frequently Asked QuestionsMicrosoft Management Console (MMC) is an extensible common presentation service for management applications. MMC is included in the Windows? 2000 and XP operating systems.
Related QuestionsWelcome to Irish Broadband - Talk General FAQ'sATA or Analogue Terminal Adapter is a piece of hardware you need to convert the analogue signals from your normal telephone/handset into digital information for transmission over your broadband connection. The Siemens Cordless Phone that Irish Broadband offers combines the benefits of an ATA and a digital cordless phone in one device.Related Questions
AstraTEL "The cheaper way to link your World"An ATA stands for 'Analogue Telephone Adapter'. It allows you to connect a telephone handset to your network and onwards to the internet. The ATA supplies dial tone to your telephone handset and connects you to the TalkFREE network. If your computer logs into your ISP for you then you will need it turned on and running before you can make calls using you TalkFREE account. If your modem or router logs into your ISP for you then you should not require you computer to be on.Related Questions
