In general, each new version of Ignite-UX is compatible with any scripts or configuration files that were delivered with older versions. If you follow some simple guidelines, updating to a new version of Ignite-UX involves running swinstall to install the new version; this is the same procedure as installing it for the first time. There is no need to remove the old version.

There is one known problem with having an Ignite-UX server that is multi-homed (connected to multiple subnets): The "server " keyword that specifies the IP address for your Ignite-UX server can only correspond to one of the LAN interfaces. If each subnet is routed such that all clients can use the one IP address to contact their server, then the installation will work.

Yes. It requires that you setup a boot-helper on the remote subnets, or limit yourself to using the bootsys command. Because the network boot firmware uses a broadcast BOOTP packet to find an Ignite-UX server to boot from, these packets do not normally cross over subnets. This limits clients to booting from Ignite-UX servers only on their local subnet. Set up a boot-helper system on the client's subnet that has the IUX.MinimumRuntime product installed.

If you have subscription service for the Application Media Release then Ignite-UX is available to you on the media without a codeword. In other words, free.

Depending on what you are using Ignite-UX for, you may be able to reduce the disk space usage by not installing the full product. Below is a list of typical usages and a list of what parts of Ignite-UX you need. If you are not concerned with disk space, it is easiest just to install the bundles for the HP-UX releases you plan to work with. For all cases the IUX.IGNT-ENG-A-MAN fileset can be omitted or removed if you do not want on-line documentation.

In accordance with our sales policy , we guarantee customer support service within one year from the date of purchase. The services include technical support, customer support and all updates and new releases for purchased product during that term. When 1-year support service expires, customer needs to renew that support at a discounted price to continue receiving support services. The renewal support purchase extends customer support by 1-year from the date of its expiration.

The Software Distributor configuration and Ignite-UX post_config_cmd and post_config_script scripts are run after all software has been installed and the client has booted the final kernel from the target disk.

On Mac, just replace your old beaTunes app. If OS X asks you whether you want to replace the old application, say yes. On Windows, uninstall the old version. Make sure that you do not have the installer delete Color and BPM data. Then download the new Windows installer and open it.

If you are using an old version and you click the button for calling a shop assistant while using SyncShop, you are directed to the installation website for update. In the case of using P2P, a version update confirmation dialog box appears to prompt you to update the version when you log in.

Why do the text fields in the Ignite-UX TUI not accept my input, and the dialogs re-open or loop? 6. Network Installation

No. We use pax as the tool to create the archive tape and there is no current communication between pax and the GUI to prompt the user on the GUI when pax requests a second tape. You need to use make_tape_recovery on the client to be able to span multiple tapes. If files are removed from the client between the time the list of files to be archived is created and the time the files are actually archived, warnings are generated.

The Rev. A C3700 and J6700 models were two short-lived systems that had the PA-8700 2.2 chipset revision and 1.6 firmware revision. They were only supported on HP-UX 11.00. Since the WINSTALL kernel is 11i v1-based and PHKL_27152 (or one of its predecessors) is included in that kernel, it is not possible to boot the installation kernel on these systems. They must be upgraded to Rev. B, which includes the PA-8700 2.3 chipset. There is a service note, A7277A, which addresses this situation.

It depends on what SecurePath is controlling. Ignite-UX does not support active/passive EVA GL (EVA3000/EVA5000) disk arrays because of multiple known issues. For more information about potential issues you may encounter, please read the latest version of the Ignite-UX release notes and search for EVA. You should note that these issues do NOT affect active/active EVA GL or any EVA XL disk arrays. These disk arrays are fully supported for use with Ignite-UX.

Ignite-UX generates an error indicating that you must select the FDDI software for installing if the following conditions exist: Ignite-UX provides the error prior to starting the configuration phase to avoid the client being unable to complete the installation due to the lack of the FDDI drivers. Ignite-UX does not have any way of detecting the inclusion of FDDI software in an archive so it assumes that it is not.

HP applications that have been tested with Ignite-UX have an OD1 option on the HP Corporate Product List (CPL), which indicates the factory integrate option. This option directs HP factories to install the software on the your client before it leaves the factory. HPmanufacturing installs the software from a depot using the Ignite-UX process. No applications are tested for proper installation or operation when included in a golden image archive that is installed with Ignite-UX.

To update your copy of GeoClock, whether or not it is registered, download the latest GCKWINxx.ZIP, and unZIP it into the directory with your existing GeoClock. If you have made extensive modifications to the GEOCLOCK.INI or the GEOn.DAT files, you may not want to overwrite your old copies of these files with the new versions. If your old copy of GeoClock was registered, the REGISTER.EXE or GEOCLOCK.KEY file will automatically register the new version at no extra cost to you. The file UPDPROxx.

Kanotix will, starting with version Kanotix 2005-04, have a completely new feature, which is around for testing in the Release Candidates (from RC8 onward). This new feature enables you to use a Live-CD containing the newer version to update an existing Kanotix-HD-Installation. Hereby the old kernel and packages will be exchanged for newer ones. Newer hardware-modules will also be added.

When an Openbravo installation is updated to a new version the texts that have not changed remain translated and the ones that have been modified or are new (for example, new options) will appear in English and need to be translated. To upgrade the translation from an old version to a new version just import the old translations into the new version of Openbravo and export translations again. A new set of XML files with the new strings is created.

You may have software bundles that have overlapping contents: filesets and/or files. The make_config command makes sw_impact statements for each bundle without doing anything special to guard against over-counting when the bundles overlap. For example, the Ignite-UX-11-XX bundles all overlap so when you install all of them using Ignite-UX it estimates too much space. You should be able to add the sw_impact of all the sw_sels that you are installing and to calculate the required file system size.

During a client recovery, Ignite-UX strives to restore the client back to the way it was. However, Ignite-UX is a general purpose installation tool and as such it has the capabilities of modifying many client configuration files. When you run make_net_recovery, client configuration information is gathered and saved in configuration files that are used later when the client is recovered.

A/UX 3.x.x incorporates the full functionality of System7. It supports the QuickTime multimedia extension and the new Mac Quadra computers (not the AV machines, however). A/UX 3.x.x includes X11R4 in its distribution, as well as MacX. Installation of A/UX is much easier that it was before and can be installed on any 3rd party hard disk using the "new and improved" HD Setup application (see Admin Q&A though). is a later version of A/UX. 3.0.

Upgrading the server is a simple process of running the CSE 2.0 installer on the CSE server, all existing information and settings will be migrated.

would be expected, there are a number of minor changes and corrections throughout the document. In particular, thanks go to Sharon Hill for pointing out that my contact information was wrong in one place. (Talk about stealth marketing!) However, the major changes are enumerated below: David Herron and Dave Garmus commented on the document.

This one is tricky. First of all, the version of AppleTalk under A/UX was designed specifically for A/UX... Don't try installing the Network Software Installer (NSI) disk. Bad Things will happen. With that out of the way, when polled by InterPol, A/UX will respond that AppleTalk v56 is running. However, A/UX's version is really compatible with version 58. This will cause trouble with those applications that rely on version numbers rather than capability.

The HP-UX Web Server Suite is a free product that can be downloaded for HP-UX platform and includes key software products necessary to deploy, manage, and implement mission critical web servers. The suite is comprised of: These components are based on software developed by the Apache Software Foundation (http://www.apache.org) and Webmin (http://www.webmin.com/).