Most RFID devices are single mode of operation devices. This means that they operate at a specific frequency for both transmitting and receiving data (or commands). Almost all passive devices are single mode. For instance operation at 13.56 MHz or 868/915 MHz means that the devices are commanded at this frequency and modulate a return signal at the same frequency. Semi-active devices are generally single frequency devices but use a battery to boost signals.

Dual mode provides the ability to achieve one-on-one tag communication and control. This "singularity" is absolutely essential if 99.9% reliability is to be achieved under all conditions. Conversely, the ability to affect a broad area of control and communication is also necessary and this attribute is achievable through a dual mode of operation. The RF mode enables long distance read/write and also the ability to channel data into secondary RF, such as WiFi networks.

DenyHosts daemons periodically connect (based on the configuration file parameter SYNC_INTERVAL) to the denyhosts.net remote server. If hosts have been denied by this daemon then they will automatically be transmitted to denyhosts.net. If new hosts have been denied by others (that is, other users running DenyHosts in synchronization mode), then they will be added to your HOSTS_DENY file automatically (based on your SYNC_DOWNLOAD_THRESHOLD setting).

With your Thuraya satellite phone and Thuraya SIM, you can make calls via satellite from anywhere within the coverage area. You also have the option of roaming from Thuraya into a local GSM operator given that Thuraya has established a roaming agreement with your local GSM operator. With your Thuraya satellite phone and GSM SIM, you will be automatically accessing network. Hence, your calls will be billed on your normal GSM bill.

Emacs 19.29 or thereabouts stopped using a terminal type of "emacs" in shell buffers, and instead sets it to "dumb". Zsh only kicks in its special I'm-inside-emacs initialization when the terminal type is "emacs". Probably the most reliable way of dealing with this is to look for the environment variable $EMACS, which is set to t in Emacs' shell mode. Putting [[ $EMACS = t ]] && unsetopt zle in your .zshrc should be sufficient.

Answer: Tags (Folksonomy) are keywords that are chosen by you and/or another member to describe you or your profile. Click the "Tags" link at the bottom if any page to see examples. The larger the KEYWORD tag the more often it is used and the greater number of hits/members associated with it. quot;Tag" a member's profile with a key WORD - simply click on the member's profile and type in your WORD into the area "Members tag this profile as" and click the tag button.

Dual-band/dual-mode phones are also known as tri-mode phones. They can operate in digital mode on 800 MHz and 1900 MHz. The phones can also operate in analog mode on 800 MHz. What this means is that the phones can operate on the three major wireless systems deployed in the U.S., thereby allowing your phone to work almost anywhere wireless coverage exists in the United States.

In incremental mode, ajc minimizes the files that need to be recompiled after another file has changed. In Java, only the changed files need to be recompiled, but in AspectJ, other files might also need to be recompiled or re-woven. Depending on what is modified, we may need to re-weave code. If you change a pointcut and save it, we currently have to check everywhere in case a new match is occurring or an old match is no longer correct.

Your camera has a built in light meter, which it uses the measure the amount of light in the scene at various places. The position of the light meter will vary from model to model. Some popular positions in SLRs are behind the (partially reflective) reflex mirror, or in the pentaprism. On some digital cameras, the main sensor may serve double duty as a light meter.

Dual language feature allows you to display the e-commerce web site in 2 languages of your choice. To setup the second language you have to download the language file from our website or translate the English language file into your desired language and Ordering your copy of iNTELcart is easy and secure. NO hidden charges, NO monthly fees, NO additional support costs! Check out our hosting plans and professional templates gallery before placing your order.

Dual Memberships are for people who share the same mailing address. This membership gives you the same benefits as an Individual JA Membership, but it is assumed that your guest will be the person with whom you joined (under most circumstances). You can get a Dual JA Membership for $815, which includes a required Dual Museum Membership of $120.

RFID tags are small microchips (about the size of a grain of rice) that work by sending out a small encoded radio signal when in the proximity of RFID reader equipment. The RFID readers supply a small amount of elecromagnetic power which allows the tag to transmit a faint radio signal. The tag's signal contains the unique identification number encoded onto the chip during the manufacturing process. The reader device can then display this number to the user.

By clicking on the tags available in the tag cloud, you can view all articles which contain that particular tag. The tag cloud is just one more way by which you can get to your solution on Zolved! By clicking on the tags available in the tag cloud, you can view all articles which contain that particular tag. The tag cloud is just one more way by which you can get to your solution on Zolved!

A beacon tag is the simplest and lowest cost active RF tag available. These devices are factory set to transmit a periodic RF signal that can be used for location, process and presence detection and tracking. These devices can be placed into non-metallic enclosures and will transmit an RF to a reader located at a distance of 3-10 meters.

It can work with any heads in dual mode where they are operating separately but for ratio or difference it can only work with pyro vs. pyro or thermal/photodiode vs. thermal/photodiode.

Yes and no. If you have an analog-only phone, you can use Ositech's CellFlex-capable products, but they will only allow you to make analog connections (as you would make with any Cellular Internet solution). Your phone, since it is not Dual Mode itself, will not be able to tap into the added power of Dual Mode Data.

Synaptics Dual Mode solution has the same functionality as other TouchPad devices such as tap to select, double tap, right click, virtual scrolling, EdgeMotion™ and PalmCheck™. These features are available in navigation mode only.

Many people have tried to mix value mode with date conditions. For example, take the query SHOW 1: DJIA WHEN Date is 1 value after yearly Close What people are trying to do with this is to get the first value of 'DJIA' after the close of the year. I.e., the yearly close happens on 12/31; a day later is 1/1 which is a New Year's Day, a holiday. So, people expect the query to return the value of 'DJIA' on the day immediately after New Year's Day. Unfortunately, that is not how the system works.

Signals inserted into the External Modulation In connector are interpreted and the results displayed on the 625A"s front panel and sent to the RS232 port.

Versions of autoip before V1.3.26 incorrectly handled the SNMP community of switches that were not set to 'public'. You may download Auto IP V1.3.26 here. After download, using the Add/Remove Programs tool to uninstall your current version. Say yes to uninstalling the ping daemon when asked. Then run the new setup program you just downloaded. That's all.

This item is specially priced for a limited time. Click on our Specials link on the task bar at the top of every page.

The computer locks up or freezes as soon as the DVC325 is connected to the computer. The cause is under investigation and there is no solution or workaround at this time. You may need to upgrade your version of software in order to Save As MPEG. If you have version 4.1, it is not compatible. If the message appears: Setup cannot find the program file Vwork32.exe in your VIDEOWORKS directory, click Browse and direct it to C:\programfiles\newsoft\presto! videoworks and click OK.

Before PCS, all cell phones were single band devices that operated only in the Cellar 800 band. When service providers started to deploy both Cellular band and PCS band service, the cellular phone manufacturers started to make dual-band phones. These phones constantly report the signals and channels that are receiving to the towers, even when there is no call engaged.

Dual Mode Data, like Dual Mode cellular phones, is a data connection technology which allow your cellular PC Card to switch, along with your phone, between analog and digital modes allowing connections under either network.

Synaptics Dual Mode TouchPad™ is a touch-sensitive pad that offers two modes: In default Navigation Mode the TouchPad provides cursor control navigation and scrolling. In the second mode, tap zones are illuminated to launch applications and provide media controls. Synaptics Dual Mode TouchPad devices are customizable to ensure the solution meets the needs for your specific application and programs.

Dual Mode solutions are available now, please contact your local Synaptics representative or email sales@synaptics.com

In dual-engine mode, it is possible to open session files from two speech recognition engines simultaneously for use with file comparison techniques to edit text.

While different models are discussed, the question is best provisionally explained by a classical, simplified example(1,2): The phosphate groups connecting the nucleotides of a DNA chain are negatively charged. In naked dsDNA they would repel each other, and the DNA would represent an 'open chromatin' conformation. However, the extruding N termini of nucleosomes are positively charged.

Geocaching mode is really just a special way of sorting and keeping track of waypoints. If you load a waypoint with a Geocaching symbol (by default, a closed treasure chest), then that waypoint will appear when you press FIND ? 'Geocache' ? ENTR. Pressing these keys lists geocache waypoints you have loaded. (By pressing MENU, you can select 'Find by Name' to show all Geocaches in alphabetical order, or 'Find Nearest' to show the nearest 50 Geocaches.

A tag is a single keyword applied to a post that describes a topic, theme, or category of the post. Each post may have multiple tags. For example, a post about a mouse might have the tags, mouse USB optical wireless DPI. If you enter multiple words separated by spaces you will create multiple tags, not a phrase.