Can I install a tape back-up drive?
Digital Watch Dog Frequently Asked QuestionNo. The current tape drives use a proprietary software which create virtual drives(library). This causes errors as the DVR tries to write to the virtual drive. [FAQID No: 130] Unless otherwise indicated, all materials including without limitation to textual content and graphics in this web site are copyrighted by KALTECH Electronics, Inc. Distribution, posting, or copying is strictly prohibited without written permission from KALTECH Electronics, Inc.
Related QuestionsHow do I add a tape drive?
Environment settings set by a batch file are not working.Before you can add a tape drive you should first ensure that the correct SCSI driver is loaded for the card the tape drive is connected to. Once the SCSI driver is loaded you should perform the following Click the Add button and select your tape drive from the list or click the Have Disk button and select the location for the driver.
Related QuestionsUntitled DocumentUnplug the power from the unit, take the old production cartridge out, put the new one in, plug the power back in. What can we tell you? It's NOT A TAPE! No tape heads to clean, no tape to break or stretch or get eaten. Our service is entirely DIGITAL. We provide you with a CARTRIDGE which slips into the side of the box (Don't worry... every time we send you a new production cartridge we'll send you a diagram on how to take the old one out and put the new one in).Related Questions
Will Small Linux support a parallel tape drive?
Small_Linux: Less FAQI need to find an OS that will fit on very few floppies (preferably 1 or 2) that will allow me to boot a PC & backup it up using my external parallel port tape drive. BRU backup software fits on 1 floppies and can backup to any device that the OS will support. Thank you in advance, Rich A soon to be Linux user, just got to save some things first! Ok, first thing you need to check are that the NE drivers in each machine are installed.
Related QuestionsCan I use any 4mm tape in my drive?
mm DAT drives FAQNo. It should be certified DDS-grade media compatible with your generation of DDS drive. Look for the DDS logo on the cartridge. Do not use uncertified DDS cartridges or DAT audio cassettes.
Related QuestionsHow do I clean the tape drive?
Wide Infotech - Provider of Effective Hardware, Web and AMC ...Simply insert a cleaning tape. Follow the instructions on the cleaning tape and the entire process takes about 15 seconds.
Related QuestionsWhat are my Tape Drive and Library choices?
BytePile.com - FAQ PageBytePile.com offers both single and mutiple tape drives as per the customer's requirements. We also provide single tape solutions as well as Mutli Tape Library Systems for those that have large data archives..
Related QuestionsHow do I find out if the tape drive supports compression?
OpenVMS FAQ -&- page 9Devdepend2 = F$GETDVI("$n$MKcxxx:","DEVDEPEND2") $ Comp_sup = %X00200000 $ Comp_ena = %X00400000 $ IF (Devdepend2.AND.Comp_sup).EQ.Comp_sup THEN - WRITE SYS$OUTPUT "Compression supported" $ IF (Devdepend2.AND.Comp_ena).EQ.Comp_ena THEN - WRITE SYS$OUTPUT "Compression enabled"
Related QuestionsCan I install Radius to any other hard disk than my C: drive?
NJDEP Air Quality Permitting Program (AQPP) - RADIUSNo, RADIUS was designed for individual PC use and certain configuration files will not work if the program is stored anywhere but the C: drive.
Related QuestionsHow can I get and install the Debian distribution from a tape?
The Debian GNU/Linux FAQ: Getting and Installing Debian GNU/...present, installing packages directly from tape is not supported. One can however, use tar, cpio, or afio to copy Debian archive files onto a tape, then copy them onto your local disk for installation. In the same vein, floppy disks containing "tar" files would have to be copied onto a local disk before they could be managed with the Debian package tools.
Related QuestionsCan I use a tape drive with my PERQ?
FAQ for PERQ Graphics WorkstationsYes. You'll need an appropriate streaming tape drive (an Archive QIC-2 drive that uses DC-300 tapes; further specs for the required drive will be included in a later FAQ.) and, unless you have a Multibus board, you'll need to get out the wire-wrapping supplies and wrap your own board, assuming that you have a PERQ wire-wrap board that fits in the card cage. If you don't have such a board, you can always tap into the wire-wrap connectors on the PERQ's motherboard/backplane.
Related QuestionsMy tape drive has a compression function. What is it and should I use it?
NovaBACKUP - NovaBACK and NovaDISK Frequently Asked Question...There are two types of compression that may be available during your backup: hardware and software. The hardware compression is enabled and disabled by either a DIPswitch or jumper on the tape drive. The software compression is enabled and disabled through the Options panel within NovaBACKUP. We recommend that you disable any software compression if you have hardware compression available. Hardware compression is far superior in speed and compression than the software counterpart.
Related QuestionsI currently back-up utilizing a tape drive, why change?
CompSource - 1.800.413.7361Tape Drives often indicate successful back-ups only to reflect failures when data is restored. Tape back-ups are costly and time consuming. There is no redundancy with a tape back-up and the tapes are often lost in the same mishap that destroys the original computer data. eSilo back-ups are automatic, cost effective and data is stored in redundant facilities that are located in different States.
Related QuestionsDo I need one Paranoia unit for each tape drive?
Tape Encryption Frequently Asked QuestionsYes. The design allows only one device to be connected to ensure that security is maintained whatever the circumstances.
Related QuestionsHow do I get my IDE/ATAPI tape drive working?
Linux FAQIde ATAPI tape drives work with Linux using scsi-emulation -- forget about using the ide-tape module. Most kernels out of the box do not have scsi-emulation set up since it conflicts with other tape drive support. You have to configure and compile a kernel with a particular group of seemingly un-related things turned on and others turned off. It does work and work well *IF* you get it right. Thanks to a posting by Timothy Moore (timothymoore@bigfoot.
Related QuestionsWhy is there no tape drive on RED?
frequently asked questionsTape drives compress the image, data is lost in the process as the camera needs to encode the data before it gets stored on the tape. In addition having to capture the tapes into the edit system has to be done in real time, so 6 hours of rushes would take 6 hours to digitize in. A tapeless system offers faster access to the footage as its already digitized plus the image is of higher quality because more data can be stored on the disk.
Related QuestionsWhat if my tape drive does not show up with a drive letter after installing 1Safe?
Colorado Software Architects (CSA): Frequently Asked Questio...If your tape drive does not show up in Explorer with an assigned drive letter after installing the software and rebooting, it is most likely that Windows failed to properly mount the drive. This can be fixed in almost all instances. Our Customer Support technicians have compiled a list of procedures to fix the problem. You can either view the document online or download it.
Related QuestionsHow do I install a Zip drive?
Exforsys - Apple II Csa2 FAQs: 1Main-Start, Part 1/25The main Zip installation step is plugging it in. The drive uses DB-25 connectors and, so, most likely, the cable will plug directly into your interface card with no need for an adapter. In case you need an adapter for an older 50-pin plug, these can be obtained from Alltech. If you already have other SCSI devices, the one currently plugged into the interface can plug into the Zip. Or, the Zip can be plugged into a hard disk, CD-ROM, etc. at any point in the chain of SCSI devices.
Related QuestionsWhat CD drive can I install in my Pa1X?
Pa1X FAQThe only certified CD drive is the Korg CDRW-1. Other drives may work, but are not certified by Korg and are not recommended. Please keep in mind the following considerations: The CD mechanism's size may differ to the one used by Korg, and may result very difficult or impossible to fix to the CD slot on the Pa1X. As a consequence, moving the Pa1X may result in the CD player/writer moving from its position, and eventually cause the connector's breaking.
Related QuestionsCan I install "the Hack" on my hard drive?
FAQAlthough facilities for this operation are available on the CD, I have never attempted to do it. Aside from this fact, there are still some good reasons NOT to install "the Hack" on your hard drive. The knx-installer is still available on this CD. Do a Google for more specific and up-to-date instructions applicable to your hardware and situation.
Related QuestionsCan I install Linux on drive F:?
Exocore ConsultingLinux does not know the concept of drive letters. RedHat Linux cannot be installed in a Windows Partition. Follow the instructions above.
Related QuestionsHow can I install Kanotix to my hard drive?
kanotix.com :: GNU Linux Live system based on Debian Sid, op...You can use this Live-CD perfectly for most anything a PC can do. (surfing, playing movies or music, watching tv, writing your dissertation, solving problems with your hard drive ...) Installation to the hard drive is much more comfortable and lots faster than running a system off CD. So, lets get going! This How-To is specifically for Kanotix 2005-04 (for older versions refer to: http://wiki.kanotix.net/coma.
Related QuestionsWhen can I drive again?
Reading Heart Surgery .com - Cardiothoracic Surgical Associa...We are very cognizant that pain control is very important for the patient's well being. Medications are provided to control the level of pain. The typical patient, however, requires only Tylenol and occasional Tylenol with Codeine for control of pain.
Related QuestionsWhen can I drive?
Cardiovascular of Southern Nevada - FAQsGenerally speaking, we do not want anyone to drive until approximately 30 days after surgery, just to let you get over some of the soreness from surgery without depending on your reaction time while turning the steering wheel or having to brake. Sometimes people can start driving earlier, but we certainly do not want patients who are on narcotics or pain pills to drive. We suggest when you start to drive, you drive in an area that is very quiet so you can get your "driving legs" back.
Related QuestionsWhat are the jumper settings for the Archive Viper tape drive?
Section 0. (Basic FAQ information)Why haven't we changed the defaults in rdump and rrestore to something that makes sense? I was trying to dump a filesystem to a remote tape and ran into an error complaining about being unable to execute /etc/rmt.
Related Questions