Generally, yes. SingleControl is built to be used on a multiple system setup with multiple displays. However for smaller installations you may be able to get away with using just one or two monitors. Some monitors do allow multiple sources - 2 PCs per monitor. Check with the monitor manufacturer for specs. Although it won’t be automatic, as you would have to switch the monitor’s source with a button or similar way, you would still need only one keyboard & mouse on your desktop.

Typical old workstation monitors are not very practical PC display device because their limitations in supported scree modes. Typically it is possible to have one particular Microsoft Windows or X-windows (for Linux and Unix users) screen mode to work with that monitor, but there are many screen modes which the workstation monitor does not show.

If you are working in campus, you are also suggested to logon to e-SVU portal (http://e-svu.nus.edu.sg/) and use the MobileVisLab remote visualisation system to run the CFX GUI.

No. eBeam software can be minimized and running in the background, and will still capture your whiteboard markings. However, it's MUCH easier for your remote site students to see what you're writing if you have eBeam displayed on the screen, instead of having the Instructor Camera focused on you while you write.

First on the local workstation type: xhost [ Remote Hostname ] Then on the remote workstation type: setenv DISPLAY [ Local Hostname ]:0.0 This will allow you to display the GUI on you local workstation.

It is possible to damage equipments when playing with PC vidoe hardware and workstation monitorts. If the monitor has standard video inputs, is workign properly, cable is properly constructed and everything is connected to properly grounded power outlet then the risk of damaging the graphics card is minimal. Some monitors can be damaged by sending wrong frequencies to them, so be sure that you send right frequencies to monitor.

A Workstation is a high-level stand-alone machine usually designed for a particular purpose, such as CAD engineering, digital content creation, or data modeling, where as a PC (personal computer) is not as sophisticated or powerful and is generally used for basic office and home applications.

Some manufacturers make special grpahcis cards for PCs which allow PC to be succesfully used with fixed frequency monitors. Fixed Frequency Video FAQ at http://www.devo.com/video/ has more information on those cards which make is possible to use fixed frequency monitor as general purpose PC monitor.

A workstation is needed to confine the abrasive, illuminate the work area and provide adequate airflow for dust removal. Comco WorkStations are designed for operator comfort and are the ideal environment for efficient blasting.

Yes. However, Exceed 6.2 or 7.1 or newer with Exceed 3D must be installed on your PC. Exceed is a X-server package for Windows. Exceed 3D extends the X-server with the remote GL library. Remote GL allows hardware support on the local PC box. Abaqus CAE has not been certified with other freeware X-servers for Windows like CYGWIN though you can try to download and use them on your own. Abaqus CAE should be displayed fine on all UNIX workstations, including Linux with remote GL support like Red Hat

First, you will have to get an X-Windows server set up on your PC. Many people are using Xceed for Windows, or MacX for the Macintosh to do this. Next, you will have to set your DISPLAY variable as above, to your desktop PC. The command should look something like this: This command should have your machine's name, or IP number in it before the colon (:).

Omron ear thermometers will not operate without the probe cover. The indicator message of PC will appear on the display panel. Attach a clean probe cover. Wait about 10 seconds and take another measurement.

Yes. However, Exceed 6.2 or 7.1 or newer must be installed on your NT/PC box. Exceed is a X-server package for Windows. Ansys GUI has not been certified with other X-server software packages on Windows. However, it should work with all UNIX workstations, including Linux.

Can I use VNC Viewer Free Edition to connect to VNC Server Personal or Enterprise Edition? (AKA Why do I get "No matching security types" errors)

Yes, but only if you tunnel X through an ssh connection. If you are in an office, it is possible without ssh, just ftp your Computer Science ~/.Xauthority file over to your IT account and set your DISPLAY variable to your local workstation. Note that if you ssh between Computer Science Linux workstations this will be taken care for you automatically.

Most Lectern Workstation PC's now have Internet access. Select the Lectern Workstation PC button, and click on the Internet Explorer icon with your mouse. Alternately, Instructors can bring a laptop and connect it to a campus-supplied LAN connection with Internet access. IMPORTANT NOTE: UNDER NO CIRCUMSTANCES SHOULD THE SCHOOL RECONFIGURE THE LECTERN WORKSTATION TO USE THEIR LAN AND INTERNET.

If a JRE (Java Runtime Environment) or JVM (Java Virtual Machine) was not installed with your operating system or your web browser, you may need to install the Java Plug-in to run Java applications in your web browser. Your web browser may offer you a link to download and install a JRE or Java Plug-in, if no JRE is present. If your web browser offers you a link to download and install a JRE, JVM, or Java Plug-in, please follow the instructions offered by your web browser.

Yes, only if you have a 100 MHz system bus. No,if you have a 66 MHz system bus. On certain system, a non-PC100 module may be "pushed" to run in a 100 MHz system, but the results are not guaranteed and may lead to system instability. Majority of Pentium Pro P6 Computers uses 72 Pin SIMMs. Installation requires 2 SIMMs per bank to upgrade memory. (2 sockets per bank)

No, just have each attendant login using your login name and password and they can accept chat request.

Scanning workstations need any general scanner. Aestiva will recommend hardware and scanning software upon request.

That will depend on three things. 1. ... What is the maximum temperature it will get in the area. 2. ... How much heat is your computer system generating. 3.... How much heat can your computer system tolerate before it shuts down or begins to malfunction. Putting a computer in a closed box normally requires some kind of cooling or internal air movement. It just makes good sense.

No you don't need a compiler since binaries are provided for a variety of grid dimensions on the ftp server that you got the distribution.

least 128 Mb of RAM memory to run the Simplified workstation, and 256 Mb of RAM memory to run the Complete workstation (512 Mb recommended).

In short, YES. Viruses can be introduced to a system in various ways. Damn IT Eliminator provides an additional safeguard to stop unwanted content (viruses) reaching your workstation.

If there is no activity on the 935 screen, then as far as the 935 goes there has not been an attempt to communicate with it. See Remote-Com.jpg for an example of what the screen might look like after the hardware search program has completed its update. The user must click on the UPDATE command button in the Hardware search program. See the attached file Remote-NoCom.jpg for what the blank screen looks like if the 935 does NOT receive any communications.