I want to keep my wood looking natural? Should I use a clear finish?
FAQ - UV Plus wood stain for decks, fences, siding and log h...Clears with no pigmentation do not offer UV protection or color retention. Our products contain Transparent Iron Oxide pigments which absorb UV radiation while allowing visible light to pass through. This results in a finish that highlights the natural beauty of the wood while still protecting it. We suggest using our transparent finish that is designed for the type of wood, such as Natural Redwood for redwood, Natural Cedar for cedar, and Pine/Fir for pine or douglas fir.
Related QuestionsI want to put a clear wood finish on my deck/home. What do I use?
Penofin® Wood Finishes FAQsOur only clear finish is for interior use only. We would suggest the transparent wood finish designed for the type of wood you want to coat. (Examples: Cedar/Marine for cedar or teak; Transparent Redwood for redwood.) This indicates overapplication of the wood stain. In most cases, washing the surface with a solution of TSP (Tri-Sodium Phosphate) and water, (with some scrubbing) after seven days drying time, will correct the problem.
Related QuestionsPenofin Wood Finish FAQOur only clear finish is for interior use only. We would suggest the transparent finish designed for the type of wood you want to coat. (Examples: Cedar/Marine for cedar or teak; Transparent Redwood for redwood.) This indicates overapplication. In most cases, washing the surface with a solution of TSP (Tri-Sodium Phosphate) and water, (with some scrubbing) after seven days drying time, will correct the problem.Related Questions
We want to retain the natural color of our logs and/or decking. Can we just use the clear stain?
Weatherall Company, Inc. - FAQs (Frequently Asked Questions)Actually you can but we do not recommend it. Our clear UV GUARD, UV GUARD II Exterior Wood Finish and UV GUARD Deck & Fence Coating, which are the basis of all of the colored versions of these products, have specific chemical UV blockers and stabilizers, but all logs will age/darken under any non-film forming stain and this will be more noticeable under a clear/transparent stain. Additionally the pigments act as additional sun blockers/reflectors giving a longer life to the finish.
Related QuestionsCan I put a Clear Wood Sealer on my siding to keep it looking natural?
Allen Lumber - FAQClear wood finishes generally have a limited life and they need to be reapplied frequently. Discoloration of the wood will be slowed, but will still take place. Repeated application may produce a waxy film which could repel a pigmented stain later if a color change is desired. Starting with a semi-transparent stain in the same tones as the original wood may be a better way to assure color retension and successful future reapplicaton results.
Related QuestionsWhat if I want actual samples of the iron or wood finish?
Frequently Asked Questions about buying from Carolina Rustic...We get hundreds of requests for finish samples for customers who would like to "touch and feel" before they make their purchase. Unfortunately, it is not possible for us to mail out actual physical samples to all those who desire them. In many cases, our suppliers simply do not make samples, as the digital photography they use is very accurate.
Related QuestionsI want to put a clear finish on my deck/home. What do I use?
Nu-Forest Products (Canada) Ltd.Our only clear finish is for interior use only. We would suggest the transparent finish designed for the type of wood you want to coat. (Examples: Cedar/Marine for cedar or teak; Transparent Redwood for redwood.) This indicates over-application. In most cases, washing the surface with a solution of TSP (Tri-Sodium Phosphate) and water, (with some scrubbing) after 7 days drying time, will correct the problem.
Related QuestionsQuestion: I would rather have the natural wood. Can I get my Carter with a natural finish?
Pedal Steel Guitar - Steel Guitar - Steelguitar - FAQ - Freq...Answer: Yes, on natural wood Carters, we use Curly Maple usually, and when it's available, we also use Birdseye Maple.
Related QuestionsHow do you know if a clear wood finish is good?
Exterior Wood CareThe best exterior clear wood finishes are high in resin solids and contain UV absorbers and mildewcides. They perform by penetrating into the wood cells and curing to become part of the cell structure. In this way, they become an effective barrier to ultraviolet radiation and moisture attack. The presence of UV absorbers and mildewcides combine to maintain the natural beauty of the wood for a much longer period than water repellents and wood preservatives.
Related QuestionsCan I get a clear lacquer finish for the Natural, Medium or Dark stain?
faqFor an extra charge (see Lacquer Finish option on product page ) we will be happy to apply a lacquer finish to any stained CUBE, or CASTER BASE you order.
Related QuestionsI have mild acne and want to use a natural therapy. What could help?
Myths about acne, Roaccutane, treatment for acneJust be careful when using natural products as there is a huge variation between different products containing similar 'natural ingredients'. Poorly made natural therapies can cause allergies and/or irritation. Natural therapies are far less effective than proven medical treatments for severe acne and less effective than most over-the-counter treatments for mild acne.
Related QuestionsWhat is my vehicle's clear coat finish? Why is it important?
Frequently Asked Questions about ECO Car Wash - Portland Ore...The clear coat finish gives your vehicle a "showroom shine" and protects the base coat from damage. ECO advises you to regularly clean and condition your vehicle's clear coat finish to ensure ultimate protection and luster.
Related QuestionsHow do I protect my vehicle's clear coat finish?
Frequently Asked Questions about ECO Car Wash - Portland Ore...The best way to protect your vehicle's clear coat is to visit one of ECO's many locations on a regular basis. Regular application of our Double Clear Coat Sealant creates a barrier that helps protect your vehicle's finish from harmful UV rays and airborne contaminants, as well as acids, tree saps, bugs, and bird droppings...All of which cause damage to your vehicle's factory clear coat. Our protective sealant lasts up to 30 days on your vehicle's finish.
Related QuestionsHow do I maintain the Clear Coat (Plasticoat) finish on my trailer?
Frequently Asked QuestionsWalbernize is a type of wax that has been used on Airstream Plasticoats since the first trailer was coated. Should be applied two times a year, more if you want. It was first used by Airstream when they were transporting trailers. They applied it to the front of the trailer so that when bugs and dirt got attached to the trailer in transit, they could easily clean the coach when it arrived at the dealer lot.
Related QuestionsWhen did Airstreams first get clear-coated to protect the finish?
Frequently Asked QuestionsClear-coating was first offered as an option in 1963 for those who did not like the prospect of annually giving their trailers a once-over. It became standard the following year. Clear-coating still requires annual applications of "Walbernize", available from Airstream dealers.
Related QuestionsCan I re-apply the clear coat finish to my trailer?
Frequently Asked QuestionsUnfortunately no. The 2 part material is a special application process that is only being commercially done by the factory or: Airstream plans to build some regional service centers in the future that may be able to do this process too.
Related QuestionsDo your wooden jewelry holders have a clear-coat (gloss or satin) finish over the wood stain?
Ginny's Ear-NestOur products are not stained...color is the true wood. Older stock has a diluted watco finish, new product is dipped in Weiman LemonOil for Wood, does not clog pores of wood. The Accessory Bar is a Peg Bar, not intended for earrings, only necklace,bracelet, other larger open ended danglings, such as keyrings etc. Hi I am interested in a rack for necklaces -- one that hangs on the wall. The rack is for my daughter whose lease prohibits the drilling of any holes.
Related QuestionsWhen should UV GUARD Exterior Wood Finish be applied?
Weatherall Company, Inc. - FAQs (Frequently Asked Questions)On new homes the two coats of colored stain should be applied immediately after the roof is on, the windows have been installed and the logs cleaned prior to any chinking, if it is a chink style home, to prevent coloring the chinking. The clear top coat and subsequent clear maintenance coats can be applied later.
Related QuestionsI want a shiny finish. Can I put multiple coats of UV Plus for Pressure Treated Wood on the wood?
Messmer's Inc. UV Plus for Pressure Treated Wood - Premium w...No. The only way to get a shiny surface on the wood is by using a multiple coat, film forming finish. We don't recommend clear film forming finishes on decks because they are slippery when wet, they will eventually peel, and they are difficult to maintain and recoat. When properly applied, a penetrating finish like UV Plus for Pressure Treated Wood will not be shiny, it will have a natural, matte look. For a glossy or satin appearance on vertical surfaces, we recommend our Timberflex products.
Related QuestionsI want to use *natural* colors for my soaps. What colorants are considered *natural*?
FAQ | Frequently asked soap making questions from GoPlanetEa...Natural" color additives are classified by the FDA as "Exempt from Certification". These colors come directly from plants or animals such as seeds (annatto), roots (tumeric), vegetables (red cabbage, beet juice), algae (beta carotene), insects (carmine), fruits (grape juice), etc. These exempt colors are regulated by the Code of Federal Regulations Title 21 Part 73. There are 28 such natural colors permitted for use in cosmetics.
Related QuestionsI want a shiny finish. Can I put multiple coats of UV Plus on the wood?
FAQ - UV Plus wood stain for decks, fences, siding and log h...No. The only way to get a shiny surface on the wood is by using a multiple coat, film forming finish. We don't recommend clear film forming finishes on decks because they are slippery when wet, they will eventually peel, and they are difficult to maintain and recoat. When properly applied, a penetrating finish like UV Plus will not be shiny, it will have a natural, matte look. For a glossy or satin appearance on vertical surfaces, we recommend our Timberflex products. back to top
Related QuestionsWhy should I finish my wood?
Exterior Wood CareSome people wonder why wood should be finished at all. After all, some wooden structures have lasted hundreds of years. This is true, but not all wooden structures will last hundreds of years. Weather and the wood itself can develop rot and deteriorate to the point of collapse. Another thing to consider is appearance. If you think natural wood will retain its color, you are wrong. Sunlight turns all woods yellowish or brownish, then gray.
Related QuestionsFrequently asked questions about MAR-K truck partsNo, MAR-K oak bed wood is grooved, sanded, cut-to-size and ready for you to finish. MAR-K pine bed wood is grooved, planed, cut-to-size and ready for you to sand and finish. For suggestions on how to finish your bed wood click here. Or see our wood finishing tests for information on different finishes.Related Questions
I want a shiny finish. Can I put multiple coats of UV Plus for Hardwood Decks on the wood?
Messmer's Inc. UV Plus for Hardwood Decks - Stain, finish an...No. The only way to get a shiny surface on the wood is by using a multiple coat, film forming finish. We don't recommend clear film forming finishes on decks because they are slippery when wet, they will eventually peel, and they are difficult to maintain and recoat. When properly applied, a penetrating finish like UV Plus for Hardwood Decks will not be shiny, it will have a natural, matte look.
Related QuestionsCan I use ColorFill for natural timber with a paint or varnish finish?
Frequently asked quesations relating to Unika products - gbNo, it is not suitable for natural timber with a paint/varnish finish. Please use FloorFill repair for timber.
Related QuestionsWhy can't I have a clear finish without pigment?
Messmer's Inc. Natural Wood Finishes - Wood and deck stain, ...Clears do not provide color retention. They fail quickly and the wood underneath will gray. We have shaded our clear topcoats with transparent iron oxide pigments to provide extended color retention and protection for the wood, yet maintain a clear natural appearance.
Related QuestionsIs a clear finish required over these two glazes?
Faux Frequently Asked Questions - DetailsNot always but follow general guidelines for high traffic applications. Special Effects Clear Coat may be used, but may dull the color-shift appearance.
Related Questions