How I can see what commands are executed (over the network) on the CPU transparency device?
Scratchbox - FAQ ListFor older (before 0.9.8pre4) scratchbox versions all commands executed with CPU transparency feature are logged to '/tmp/coutransp_$USER.log'. If environment variable SBOX_CPUTRANSPARENCY_VERBOSE has a value (other than '0' or 'no'), a message is outputted to STDERR everytime CPU transparency is used. SBOX_CPUTRANSPARENCY_VERBOSE may cause problems with some configuration scripts In newer (after 0.9.
Related QuestionsCPU transparency doesn't work for program X, what can I do? How do I disable CPU transparency?
Scratchbox - FAQ Listof the programs do not need any changes for cross-compilation as nowadays Scratchbox should handle also CPU type configure checks automatically. In case you come across software that queries CPU type in a way Scratchbox can't fake, you can always disable CPU transparency and configure that software manually (assuming it can be cross-compiled normally). For ARM you could do it like this: export SBOX_DEFAULT_GCC_PREFIX="host-" export SBOX_DISABLE_CPUTRANSPARENCY=1 CC=arm-linux-gcc .
Related QuestionsCan console commands be executed automatically?
FAQ multiplayer - OpenTTDYes, multiplayer is stable since version 0.3.5. Up until that version it was almost impossible to play multiplayer games due to the bad network design of the original TTD.
Related QuestionsWhat do I need for network transparency?
KDE Multimedia Homepage - Frequently Asked Questions by KDE ...Enable it in kcontrol (enable X11 server for security information and network transparency). Then go and copy your .mcoprc to all machines you plan to use network transparency from. Relogin. Make sure that the hosts that interact know each other by name (i.e. make sure that they have resolvable names or are in /etc/hosts).
Related QuestionsBACK TO TOP My device is associating to another network, not EarthLink. Why?
EarthLink® High Speed - Frequently Asked QuestionsThis may occur when there is more than one available wireless network within range of your wireless device. In order to connect to the EarthLink Network, follow these instructions.
Related QuestionsHow do Java applications get executed on a MEAP device?
MEAP FAQs - Canon USA Developer SupportJava applications are executed software called a Java Virtual Machine (JVM). A JVM for Java 2 Micro Edition (J2ME) with the Connected Device Configuration (CDC) is embedded on the device. Java applications need to be translated (compiled) into a form called byte code in order to be executed by a JVM.
Related QuestionsCan replication operations be executed automatically i.e. without giving any manual commands?
Daffodil Replicator (OS) FAQ'sYes, it can be done. Daffodil Replicator (OS) uses the concept of scheduling for this purpose. A user can add a replication schedule once and remain free from executing a replication call manually, time and again. Replicator will automatically replicate data on that scheduled time. Yes, it does. Daffodil Replicator (OS) uses Scheduling which permits replication in two modes-Real time and Non real time.
Related QuestionsFAQsYes, it supports Real time and Periodic replication. Daffodil Replicator (E) provides scheduling which permits replication in two modes - Real time and Non real time. In Real Time mode of replication, replication process specified in schedule will be performed continuously without any time delay. When you commit the records after performing any operation on database, it gets reflected on both the sides.Related Questions
Can CLI commands be simultaneously executed on multiple devices?
ProCurve Networking by HP - Support - FAQsYes. If you issue CLI commands to multiple devices using the CLI wizard, it issues the commands to 5 devices at a time in parallel until all devices are complete. This number can be configured within the Preferences Window.
Related QuestionsWhat is a transparency?
The Test Card FAQThe use of "opacities", or cards relied on reflected light being received by a camera. This created problems as the image varied depending on lighting conditions and shiny reflections could also appear depending on the card and camera position. Transparencies relied on a sheet of film being placed in front of a light box, in much the same way that X-Ray photographs are viewed by doctors. This gave a constant image that could be used as a reference point for testing the other equipment.
Related QuestionsFrequently Asked QuestionsTransparency" can be defined as a principle that allows those affected by administrative decisions, business transactions or charitable work to know not only the basic facts and figures but also the mechanisms and processes. It is the duty of civil servants, managers and trustees to act visibly, predictably and understandably.Related Questions
GicleeArt.com Giclee Frequently Asked QuestionsA transparency is a color positive (like a 35mm slide) taken of the original artwork by a professional photographer under studio conditions. We recommend 4"x5" or 8"x10" transparencies which provide good color and sharp detail. To get transparencies made, contact professional photographers skilled in copy work. When you go to pick up the transparency, ask to view it on a light box and inspect for color accuracy and sharpness.Related Questions
What are .commands?
FAQ (Frequently Asked Questions) - Mariusnet v2Commands are commands that can be entered into the mariusnet lobby to perform some task. Mariusnet has a very comprehensive collection of .Commands providing lots of useful functionality described at our .commands page (may not be exhaustive). For a quick list of commands type .help in the mariusnet lobby, or .help [command] (without the square brackets) to get a detailed description of any particular command.
Related QuestionsTrue 100% Transparency?
Ultera Systems | Frequently Asked Questions, Virtual Tape St...Ultera's Striper Series, Reflection Series, OpticalRAID Series and MultiMaster Series controller's operate an array of removable media data storage devices or libraries as if each device was directly attached to the host system. Seen by the host as a single storage device with increased performance, online storage capacity & reliability. Transparent barcode support by assigning the same barcode number to each media cartridge within the RAID set.
Related QuestionsCan I have both user CALs and device CALs on my network?
Licensing: Windows Small Business Server 2003 R2: Frequently...Yes. However, experience has shown that this introduces uncertainty and complexity to managing your licenses and staying in compliance. We strongly recommend you determine which method is prevalent (or preferable) on your network, and then use only those CALs.
Related QuestionsWhere does this device sit in the network?
ComBrio FAQThe VSIadministrator and VSImanager reside at the Operations Center, in the protected network segment. However, for customers not wishing to terminate Directed Circuits within the protected segment, the flexible architecture of the VSImanager enables it to be moved to the DMZ. The VSIgateway resides at the remote location, within the DMZ or the protected network, and can be located behind multiple firewalls.
Related QuestionsHow do I view information about my device network?
Modius | Resources | FAQsSimply point your web browser at the OpenData web address, where all of your critical facilities equipment --- regardless of location, type or manufacturer --- will be displayed in a device tree. An icon represents each device, depending on its type. All system activities will take place through this one web portal. With access rights, you can view, change thresholds, trend or monitor anything on the device network from any location.
Related QuestionsMy mobile device uses a XSCALE cpu. Where can I find applications for it?
FAQIf an application is not available for the XSCALE cpu you can also use the ARM (StrongARM) version of it. XSCALE cpu's also understand ARM instructions. My newer applications (e.g. MemInfo.NET, Rosebud, Voyager) are developed with the .NET CF and in this case you need not care about it.
Related QuestionsCan I mix commands from more than one remote to a single device on my MX-800?
Universal Remote ControlYou can activate your backlight by pressing the "Light" button located on the side of your MX-800. Your battery life is affected by Back Light On time you select. The factory default setting for the backlight is 10 seconds. You can select a custom time from 1 to 99 seconds. The longer the Back Light On time the shorter the battery life. Most people choose 10 or 12 seconds. You can experiment with the backlight time.
Related QuestionsIs it possible for me to customize commands supported by the IOS device?
Network Element Simulation, Device Simulation, Simulated Dev...Yes, it is possible to customize the commands supported by the IOS device. The IOS simulator comes along with a Script Editor to facilitate viewing and editing of script files configured for the IOS commands. Refer to the Help topic, IOS Simulator Guide -> Script Editor, to learn about the complete set of commands supported.
Related QuestionsIs it possible for me to add new commands to the existing IOS Device ?
Network Element Simulation, Device Simulation, Simulated Dev...Yes, you can add new commands to the existing IOS devices from the device tree. Refer to the Help topic, IOS Simulator Guide -> Adding IOS Commands, to learn about adding new commands.
Related QuestionsWhat is the CPU?
Family Access to Medical Insurance SecurityCPU stands for Central Processing Unit. The CPU runs the toll free customer service line and processes the FAMIS applications.
Related Questionslq-text FAQThe lq-text code has been extensively profiled and refined over the past twelve years; as far as I'm aware there's no faster text retrieval system, neither free nor commercial, that also supports updating the index.Related Questions
eBusiness Resource - Introduction to eBusiness - Any Questio...CPU (central processing unit) is the central unit in a computer containing the logic circuitry that performs the instructions of a computer's programs.Related Questions
top Why does Netpresenter use so few network and CPU resources?
Netpresenter - Support - Non Technical Frequenty Asked Quest...Netpresenter Players are developed for continues usage (24/365), where bandwidth and CPU time is precious. They were designed to operate on global heavily loaded business networks and run without problems even the most stressed-out corporate PCs. A typical client installation (without the Editor) will require approximately 1 MB of disk space. This makes Netpresenter an ideal "Thin Client" solution, which can even runs CPU/Network critical Citrix servers.
Related QuestionsBy using what commands can I boot UltraLinux from the network ?
UltraLinux FAQBooting over the network responds: "receive failed: The file just loaded does not appear to be executable". Booting over the network responds: "is not executable", or: "not in correct format!".
Related Questions