Vinyl siding or new aluminum may be painted with a 100% acrylic finish without priming, as long as the surface is clean and dry. Weathered aluminum needs to be cleaned and then primed with an oil based primer before applying the acrylic topcoat. When painting vinyl siding, be sure that the color chosen is a shade no darker than the original color because dark colors absorb heat from the sun and may cause warping or buckling.

In the case of aluminum or vinyl sidings use the IPexterior plugs as usual, installed in a 1" drilled hole. You can install the plug without making an unsightly indentation or installation mark in the siding by using a 1 3/8" hole saw on the siding only, which will allow the plug to be drawn up flush with the siding and prevent any buckling when the cap is installed. If there are signs of the siding buckling, back off on the plug so that the cap fits snugly against the siding.

Yes. All surfaces must be clean and free of debris prior to painting. Repainting aluminum siding can make it appear new and can be done for approximately 1/4 to 1/3 the cost of having new siding installed.

In a way, it's almost no contest. When compared to wood, brick, stone, stucco, and metal sidings on the basis of initial cost, maintenance costs, appearance, durability and value, vinyl siding is clearly superior. Alside offers a broad range of vinyl siding products, so you can choose one that's easily affordable. Whichever you choose, you can expect the highest quality and lasting beauty. And Alside vinyl siding never needs painting or staining.

Yes. You just cut away the siding, mount a pressure treated ledger board 2" x 8" (the same width as your awning) wrap it in aluminum, then mount the awning to the board. Or, you can paint the board the same color as your house or trim if you want so it will blend in nicely with your siding or trim. Our stationary canopies or awnings can be installed directly onto any siding, be sure that the screws are mounted into studs for a secure fit.

Answer: Yes. It's easy. Our Motorized PRO model can be installed directly onto any siding without a board provided the proper anchors are in place.

Yes, Liquid Vinyl Siding can be applied to any paintable surface, even including other sidings such as aluminum or vinyl.

No, as long as the siding has had a chance to weather a year before painting. You do need to clean the surfaces first with a cleaner like ProClean Extra Strength Pre-Paint Cleaner Degreaser. You want to be sure the surfaces are free of chalk and residue.

Vinyl siding is one of the most versatile exterior design products you can work with. Alside, for example, offers many different vinyl siding lines. That broad selection lets you choose among a wide variety of design options, including horizontal and vertical siding; traditional clapboard and authentically detailed "shaped" sidings; wide and narrow panel exposures; smooth, subtle and deep wood grain textures; plus a wide assortment of traditional and contemporary colors.

Absolutely. The correct technical name for the material used in vinyl siding is polyvinyl chloride. It's a strong, durable, proven material that has earned a solid reputation for its beauty and permanence. It's used in automotive applications, medical devices, defense weapons, appliances, floor coverings, and of course, home construction. It's ideal as an exterior material because vinyl siding doesn't rot, crack, dent or warp. Plus it never peels or blisters.

Ordinarily, the cleaning action of a rainfall will be adequate to wash your vinyl siding. However, vinyl siding and soffit should be washed periodically by hosing with a garden hose and clear water, particularly in those areas not exposed directly to rain. If you desire to do a more thorough cleaning, or where high soil collection conditions occur, use a soft-bristled, long-handled washing brush. It attaches to your garden hose and makes washing your siding easier. Do not rub vigorously.

Sure. Vinyl siding is extremely versatile and can be used with just about any exterior building material“brick, cinder block, even natural logs and field stones. If you have special installation concerns“such as running vinyl siding along a natural stone chimney, for example“talk to your contractor. He's probably handled a similar installation in the past. If he hasn't, he always can get detailed installation instructions from an Alside technical specialist. a homeowner, that's important.

Yes, many of our customers use our wooden products on vinyl-sided houses. For most items we recommend 'round-head' (also called 'pan-head') brass screws, with screw heads left exposed. Screws allow more adjusting than nailing, avoid damage from hammer blows, and permit easy removal for maintenance.

When it's designed and manufactured properly, vinyl gives a home's exterior a unique combination of beautiful and classic appearance, with virtually zero maintenance required. Most homeowners tell us that their goal is to simplify chores, and gain more family time. Vinyl home siding is the ultimate Òfamily-value alternativeÓ for busy families who want more time for fun, and less time on ladders, scraping wood rot and painting!

Vinyl siding is manufactured from polyvinyl chloride (PVC), a revolutionary building material that has replaced metal as the prime material for many industrial, commercial and consumer products. PVC has many years of successful performance as a construction material, providing impact-resistance, rigidity and strength.

Besides giving your house a clean new look, vinyl siding can dramatically reduce maintenance costs and time on the exterior of your home. Other benefits of siding are durability and increased insulation. Siding can be beautiful and is customizable in color and type to match any home. The biggest benefit of siding will always be low maintenance. Siding is surprisingly durable in the harsh Colorado sun and extreme mountain weather.

For moderate dirt, hosing off the vinyl siding with water and a soft brush once a year is adequate to keep it in top condition. For more information, the Vinyl Siding Institute (www.vinylsiding.org) has helpful maintenance tips.

Yes, however you must submit your application for a permit to the Board of Architectural Review for approval.

In general Liquid Vinyl Siding is more than fifteen times as viscous as ordinary paint and has a much higher percentage of solids. A coat of paint dries to about one mil (.001) inches on the wall. Our LVS bonder dries to about 5 mils and the topcoat adds another 12-14 mils. That's a total dry thickness of 15 - 19 mils. You can see for yourself how much more protection, preservation, and duration we can provide.

Yes. Concrete Cleaner is designed to work not only on concrete, but also on masonry, brick, granite, open face block, decks, pools, pavers and vinyl siding.

It negatively alters the appearance. Attaching synthetic siding to an historic building will obscure the architectural elements that make it unique. Blatant removal of features is the most harmful aspect of a synthetic siding installation. Often times, decorative trim is completely stripped away from a home, leaving little more than a ghostly outline. Windowsills are usually the first to be cut back or taken away altogether in order to create an even surface.

For color requirements not available in anodizing dyes, painting is sometimes necessary. Anodizing provides an excellent primer base for paint applications. Anodized surfaces can also be silkscreened, dry-lube painted or powdercoated. For painting applications, it is recommended that the anodizing not be sealed.

Yes, the basic formula and manufacturing process are the same. The difference is that the vinyl formula has been specially enhanced to meet the demands of a busy deck and railing. Every component is engineered specifically to maximize the benefits of a quality vinyl. Generically vinyl is a plastic. The chemical name is polyvinyl chloride or PVC for short.

The Foundry™ had many choices when it was time to make a decision regarding types of siding material. The long-life vinyl we chose has a proven history of resilience, will withstand weather extremes, and can be manufactured in a wide range of spectacular house siding colors. No all of the tools used to install this home siding are standard. Special tools aren't needed, and, unlike competitive products, respirators are not required either.

Our sheds normally come with a 5/8th inch pine siding, but if you plan on putting on vinyl or some other type of siding, we can put on OSB siding. OSB (chip board) is a little cheaper and better for vinyl siding. Just let us know when ordering that you plan on putting up your own siding.

Only HardiPlank provides a lifetime solution to your siding problems and gives your home the look and feel of real wood. It has excellent durability and will not rot, warp, or burn. It is dimensionally stable and it will not expand or contract like vinyl siding. Southwest Exteriors has removed vinyl siding from several homes and replaced it with HardiPlank.

When necessary, simply use the garden hose to wash down the structure. It can be pressure cleaned as well. Liquid Vinyl Siding can safely be cleaned with ordinary household cleansers such as Spic & Span if needed. Because vinyl covers vinyl we also give you a can of touch-up LVS in case you have a really serious stain, such as graffiti.