Generally speaking, booting from USB disk, CD/DVD drive is supported on x86 platforms with S10 update 1 and later if the BIOS has USB 2.0 support. Before you can boot Solaris from USB disk, you have to install Solaris on the disk first. Installing on USB memory sticks is not recommended as the number of writes to these sticks is limited. Installation from USB CD/DVD drive starts, but then fails with "not finding media" error.

Yes. Writing to CD and DVD discs is supported as long as you have some packet writing software installed on your computer. It usually comes bundled as a part of larger CD / DVD recording software packages and makes your CD or DVD drive act as a standard, transparently write-enabled drive. Packet writing software uses UDF-formatted CD and DVD discs, and allows GRBackPro to write to your CD / DVD drive by treating it like a hard disk or a floppy diskette, using the regular drive letter.

What does this error mean? CD-ROM device driver MTMCDSA version 01.11 # Installed CD-ROM Drive: 1 CD-ROM is not detected or different driver not loaded The CD-ROM device driver is not detecting the CD-ROM drive. The device driver, MTMCDSA is for Mitsumi CD-ROM drives with the Mitsumi Proprietary Interface Card (non-IDE card). Please refer to the Drivers and Manuals Page. Download the driver specific to your CD-ROM drive model.

This is an optical drive that will write both DVDs (Digital Versatile Disk, Data or Video) and CDs. The LightScribe DVD+/-RW / CDRW combination drive can read, write and, using the appropriate media, rewrite a variety DVD and CD media, including CD-R, CD-RW, DVD+R, DVD-R, DVD+R DL, DVD-R DL, DVD+RW and DVD-RW. DVD+R, DVD-R and CD-R media are compatible with this drive but are a single write media. The DVD+RW, DVD-RW and CD-RW media can be written to multiple times.

Booting from a USB drive is possible on all Macintosh models beginning with the Power Mac G4 (AGP Graphics) and the slot-loading iMac (See Apple Knowledgebase Article # 58430).

You have to press the Del button to go in the BIOS and then go to BIOS FEATURES SETUP to adjust the Boot sequence to SCSI, and also you have to go into SCSI BIOS to adjust the CD-ROM Boot function to "Enable" mode. - Go to Top

When you install a CD image of Untangle Server onto an existing computer, as outlined in Untangle Server Quick Start Guide, you need to boot from that computer's CD-ROM drive. If this is your first time booting off a CD, no problem. Do the following, but read ALL the steps before you perform the following procedure because booting off a CD requires precise timing: Turn on the computer again, and wait a few seconds before you see a screen that says BIOS.

Yes. The USB Flash Disk can be used as a boot disk on a PC with a BIOS ROM on the PC motherboard that supports USB.

Before booting this floppy, take some time to explore its contents, as the disk has a filesystem on it that can be mounted and perused. To do this, insert a COPY of the Essential Utilities Floppy 1 (from now on, "the boot floppy") into the drive with a write-protect tab. Now, Because boot floppies vary from release to release, it would be most helpful to simply get a listing of the contents of your particular boot floppy.

If your Debian CD fails to boot, first ensure that you have correctly written it to the CD-R(W) medium - please see the explanation above. Additionally, please check whether your BIOS is set up to boot from the CD/DVD drive.

Press the Eject key on Apple keyboards, or F12 on non-Apple ones. Apple's symbol for eject is a triangle with a bar below it. An image can be seen here: http://arstechnica.com/reviews/1q00/macos-x-dp3/trash-eject.jpg (Back to top)

Carpal tunnel or tendinitis? Some say it's harder to play games with a TrackPoint, but it essentially comes down to feel. Make sure you figure out which you're comfortable with before you buy.

USB ports are much more common than CD and especially DVD burners, so your USB memory stick or flash drive will work with more computers than a CD-R or DVD-R. Also, the process of uploading files from your computer to a USB flash drive is much faster and simpler than burning a CD or DVD.

Most DVD drives are designed to read CD-ROM's. Check the manufacturer's specifications of your drive to verify that your DVD drive will read CD-ROM's.

Yes, with care. A basic R installation is relocatable, so you can burn an image of the R installation on your hard disc or install directly onto a removable storage device such as a flash-memory USB drive. (If you have installed packages into a private library, their absolute paths will appear in the HTML packages list.) Running R does need access to a writable temporary directory and to a home directory, and in the last resort these are taken to be the current directory.

You can include AgenSoft Product CD including PatchFactory Evaluation, DF SDK Demo and other necessary stuff when ordering PatchFactory or DF SDK at ShareIt. It is shipped via Air Mail, within 2 business weeks. CD-ROM is free if buying a Commercial or a Corporate license, and 9.95$ value for Personal license. the subscription time in the future, if you lose your copy of the software due to a hard drive failure you can download the latest trial version from our site.

All computers are equipped with multiple ports for inserting USB devices. Most workstations have a USB cable that is attached to the table for more convenient access to the ports.

The location of USB ports varies by machine. Look for a flat rectangular opening. If you're in a lab, ask the lab assistant for help. You must be patient when printing on a network, especially when printing a file with a lot of graphics. Do not keep resending the print job - that only makes the problem worse. Open the printer control panel and see if your job is in the queue. If it is, and you've been waiting more than 5 minutes, ask a lab assistant for help.

I got this working on a 256M Sandisk Cruzer Mini, but the procedure should be the same for any USB drive. I used a Linux machine to prep the drive. You can probably use a Windows machine to do all of this stuff; if you figure it out, feel free to let us know and we will update these instructions. First, I needed to repartition and reformat the drive, because the original partition table was an unholy mess which confused the boot loader.

First, Your PC or notebook must support "External USB-HDD Boot up" function. Second, to make sure all the USB cables and power cord all firmly connect to USB slots or power in-lets. No. You must start re-boot process over again. At this moment, you must choose the correct date version you want.

With the NEC floppy drive attached, go into the BIOS (F2). Under the Advanced menu, click on Advanced System Configuration. Enable USB Legacy Support then save & exit. Go back into the BIOS and change the boot order. Put Diskette first in the order and then expand the Diskette group (press enter) to put NEC Floppy above Standard, save & exit.

This is a conflict between some system BIOSes and the SanDisk Cruzer Micro flash drive. It is not related to the busTRACE software. If your system exhibits this problem, the system might appear to hang during Windows boot when you have our dongle (i.e. SanDisk Cruzer Micro) installed in a USB port. If you remove the dongle, the system continues to boot just fine. You can plug the dongle back in and everything works fine.

Therefore booting from a USB device is not possible, neither to restore data from CD via DOS-based programs.

Yes, you need a CD/DVD Writer drive installed on you computer before you can burn CD/DVD with Smart DVD/CD Burner.

You can replace the CD-ROM/DVD-ROM drive with CD-RW drive in only a few minutes. However, if you want to upgrade the CD-ROM/DVD-ROM to a CD-RW drive, you will need to purchase and install the CD-RW drive yourself. In later releases, the Eureka MD will include a CD-RW drive as one of your purchasing options. It is not recommended that you replace the drive yourself, as it may be difficult to find a replacement drive with the same type of faceplate.

Skylog backups work with CD/DVD Re-Writable drives (CD±RW/DVD±RW/DVD-RAM drives) if a proper third party packet writing device driver is installed and configured with your drive. The driver should make the CD/DVD behave like a hard disk. Packet writing software can write only to CD/DVDs if the disks are formatted using the Universal Data Format (UDF) file system.

We get reports of this sort of problem from time to time. While your disk may indeed be defective, it may also be experiencing a compatibility problem with your Play Station game console or your computers DVD-Rom drive. Alas, many of the major Anime studios do not test DVD's on game consoles or DVD-Rom drives when they are being authored, and while they will work in those devices most of the time, there is no guarantee of compatibility.

Go to Explorer, insert a floppy disk, right-click on the A Drive, click Format, check Make System disk and click OK.

I have a VMware virtual machine that's using a flat disk image. I'd love to convert it to a QEMU flat image.