Yes, it can be replaced by rewelding a few parts and bolting on some other, although it's rather pricey. The doors are fairly easy to do: the dash will require a lot more work and money to complete. Mitch Posner graciously provided the parts list and installation details. Here's what you'll need for the doors: The panels consist of two separate pieces that are attached together: you can tell from your own panels there is a separate cutout.

The Impala gets 17x8.5" wheels with P255/50ZR17 BFG TA ZR4's, along with police-package suspension, deCarbon shocks, and 12x1" ABS equipped rotors on all four wheels. The drivetrain includes the 350 LT1 driving a 3.08 rear end through a specially calibrated four speed automatic. Outside, you get body colored moldings, a rear-deck spoiler, special badging and grille, and rear window inserts.

All '94's and some early '95s came with the second gear start function built in. This has been verified. Sometime early in the '95 production run, a new PCM calibration was issued that either disabled the 2nd gear start feature on accident or on purpose. Some have heard that it was because too many people where blowing transmissions by starting in 2nd with a trailer attached. Chevrolet is aware of this problem and has opened a file folder on it (number 960149175).

No, we do not recommend this. We recommend you get a "Factory Match" kit to complement your factory installed wood dash (if you are not sure if your vehicles wood is factory installed, ask your dealer)

Absolutely not. Many vehicle manufacturers (several of which we are suppliers too) install these exact same real wood dash kits at their factories as Original Equipment. Also many new vehicle dealers install these dash kits as Dealer Installed Options, charging hundreds and hundreds of dollars more than we do here at the Wood Dash Factory for the exact same kits. These are beautiful real wood, epoxy coated first quality dash kits.

If you have a '94 or if you have switched to the Corvette valve covers, you can use the Corvette oil fill cap (P/N 12554955). Normal '95 and '96 cars can not use the cap due to a different oil fill neck. The plate/sticker can always be used, but the "best" mounting spot is where the first intake resonator rests on the radiator shroud, but other more creative mounting spots are also possible.

The standard tires are BFGoodrich Comp T/A ZR4s in the P255-50ZR17 size. Currently, BFGoodrich is the only company to make a tire in this size. Several tires are available in similar sizes, but the speedometer will then be off. The B body cars have a 5", 5-bolt stud pattern, while ALL Corvettes (and most other sports cars) have a 4 3/4" 5-bolt pattern. Keep this in mind when purchasing aftermarket wheels or drooling over those 315 series tires on the 'Vette. The stock 255/50 17's are 27.

We make every effort to make sure you have all the correct measurements needed to have your stair custom built the right way.

Because the wood grained laminates always come with the grains running in the long, or 8’ directions, we need to cut them in half and splice the seam into the back of a groove. In this way, it’s cut out when the material is removed in the cutting of the center groove. There is an upcharge for this service - please call for pricing.

Natural wood will always vary in color and grain. In nature, no two trees are exactly alike and neither are any two pieces of wood. These variations enhance the charm and unique characteristics of wood and should be appreciated as such. Yes, though to varying degrees depending on the type of wood and the climate in which you live. Wood shrinks or swells due to loss or gain of water, so changes in of temperature and relative humidity cause wood to expand or contract.

It’s a matter of customer preference. At International Murphy Beds Inc., we pride ourselves in our commitment to the highest standard of quality. This is why we use only the best melamine surfaces thermally fused to a high density (industrial grade) core. Melamine surfaces of today are a great alternative to the real thing at an affordable price. Although, if you want settle for less.

We have no affiliation with any one particular engine company. Although people tend to buy the engine that they try in our demonstrator, we try to let the customer choose what engine to fit. Once again, any engine that the customer chooses is supplied at cost.

Yes, Especially into wood. Masonry installations are a little harder. Most fitting problems arise from trying to support very large blinds. We always recommend working with a colleague when installing larger wood slat blinds.

Yes of course. And it looks wonderful. However there are a few tips to follow. Firstly, you must remove free-standing appliances such as cooker, fridge, washing-machine etc. Get the appropriate professional to disconnect your gas-appliances. Prepare the floor as above. Remove the kitchen plinths, or toe kicks. Itemise them on the back with where they came from and an arrow denoting which way up they go. Install your flooring according to the instructions.

We do not sell fuselage kits or tail kits for any of our models. We DO offer the individual parts so you can purchase just those items you really need so that you do not have to purchase an entire kit when you only need a few individual parts for repair. Note that if you need to replace an entire fuselage, or even most of one, starting from a new kit may be quicker, easier, and provide you a better product in the end.

MiraTEC is reversible. One side features a rough-sawn cedar-like texture and the other has a smooth surface.

A rip blade also has teeth bent to the left and right, but its teeth are on the top of the blade, not on the inside. They like chisels that scoop out the wood as the saw moves along the grain.

Graining consists of applying a ground coat then, using graining tools, working in a pattern of wood grain with other colors. Skillful graining requires much practice. To become familiar with the characteristics of various woods, it is advisable to study actual samples. (Your local library should have many books on faux finishing. In graining, keep in mind that nature never produces two patterns exactly alike; therefore too much repetition of pattern should be avoided.

No, but you need to be aware that the engine will be noisier under acceleration. This is because the manufacturers installation is removed and much of this is designed to reduce noise and resonance. However, you will have the benefit of a much sportier induction sound - ideal for the car enthusiast.

Most kayak kits come in three boxes. The dimensions are 98" x 30" x 2", 25" x 7" x 25" and 13" x 13" x13". Kits will fit inside most minivans, pickups, or larger station wagons. Of course, they may also be transported on a roof rack. Please call if you need information about picking up the larger kits.

Yes. Since you can trim the crystals to fit virtually on any surface, B.I.O. will fit almost on any phone or MP3 player,Or personal accessory.

Due to the nature of fiberglass, we cannot guarantee fitment. All our products are made to the closest OEM standards possible, but since they are all hand made minor difference can occur. Also with the vast possibilities of why products do not fit perfectly, such as accidents, heat, poor installation, etc, it is very difficult to guarantee perfect fitment. Please read the Terms & Conditions for more information.

Our simple "plug and play" connection system makes it very easy. It should take no more longer than 10 minutes to fit a single Racecam and 15 minutes to fit a 2 camera system, fine tuning the view takes the majority of the time.

Yes, the kits are easy to fit. If you are capable of replacing points and timing your bike/car then the kit should be no problem at all. As a guide it should take you between 1 to 2 hours start to finish, including timing!

It looks like a car without the suspension and interior! The standard kit is shipped with the body (including doors, trunk and hood) pre-fit and mounted to the chassis. All the lights are installed, and the windshield is mounted. The foot-boxes, floors and interior bulkheads are fit. The fuel tank with filler pipe and cap are also installed. The suspension, wiring and interior are packed in boxes. Can I buy the kit in stages? The frame first, and then the body? Sorry, no.

Most are built with 100 to 200 hours of work including varnishing and sanding time. When we build our wooden kayaks we take 150 hours and more. It all depends on the level attention you want to give the building. You can sweat the small stuff or get it together to go paddle.

Our wood kayak kits ship typically within 10 days of order. Some parts of our kayak kits due their size are shipped via common carrier within North America. Smaller supplies are shipped with USPS, UPS and Federal Express. Our current ship time, live from our shop, for kits can be seen here. Our wooden kayaks typically have a wait list of 4 weeks before we can begin to build your wooden kayak. To see our delivery time today please click here.

Marlow has an experienced engineering staff that is dedicated to working with customers on custom applications. Marlow uses internally developed software to optimize new TEC and thermoelectric subassembly designs to the customer's requirements providing the maximum performance.