The DV 4500's direct print function will only work with printers designed for this feature. Printers that support this feature will be labeled as "PictBridge" compatible. This function will not work with regular printers so you will not be able to connect your camera to them and print.

Yes, if the printer support PictBridge. More information, please refer to the operating manual of the printer

In brief, Windows supports many of the Apple "Postscript" laser printers; check the Windows' printer setup for a list of printers, then look for the "Apple" printers, for specific models. Non-Postscript printers include all of the Apple inkjet printers (all Stylewriters), and some of the oldest laser printers. Regarding impact or dot-matrix printers, you can with effort hook an Imagewriter or Imagewriter II to your Windows system via the SERIAL port; select the C.

Yes, multiple cameras can easily be connected. Clarion has a power box that accepts three camera inputs, with the facility to add on a three camera switch box. Depending on which model, Rear View Cameras Australia has a two, three and four camera input versions. Please click here to view our examples.

Your receipt printer can be connected via USB or Parallel. There are no special guidelines to follow. Simply install the Windows driver for you printer. Plug in your printer. Select your printer in the Register Settings of Perennial.

Yes, with the optional Ethernet/EtherTalk/Localtalk interface card which is available from Epson Accessories. To print lines instead of characters, the printer needs to be in graphics mode. Select a graphics character table (PC437). To switch to PC437, make sure dip switch 1-4/6/7/8 are OFF and 1-5 is ON. Turn the printer OFF to save the setting. Turn the printer back ON and try printing again.

The Registered, Network-Connected KODAK Smart Picture Frame is not a computer peripheral (device), and there are no ports for connecting it to other computer peripherals. Therefore, you cannot connect the Smart Picture Frame to a printer. If you would like prints of the pictures on your Frame, you can order them from Print@Kodak directly from your Frame. Remember, Print@Kodak can print only pictures in the JPEG file format.

The printer assigned for use in the JCCL is called "venom". If you are not connected to this network printer just complete the following steps. From the START menu, go to the Printers folder in the "Settings" group. Select "Add Printer". Choose the option, "Network Printer Server", and finally, click on Ferret. You should now be able to print from all the applications. Note: The printer in the ILab is named \\ferret\ilab.

Answer: Yes, most printers have options available to connect to the more common Networks, such as Novell, Ethernet or NT. Company - Bar Code Systems - Printers - Service & Support - Labels - Printer Supplies - Request A Quote

I get a message saying that the data file (TourPlus32_Data.mdb) is already in use and I cannot connect to it.

Printer servers are the solution in most cases. You can allow a printer connected to your computer to be available across the network. In this case your computer will need to be on in order for others to access it.

There are a few methods depending on the specification of your camera and your requirements. If you require JLIP control of your camera and still image capture to a PC, you could use a product like the JVC GV-CB3 JLIP video capture box which allows still image capture from any analogue video source and control of JLIP devices. However, if your camera is one of our later designs with a PC digital still socket, then you could use a product like the JVC HS-V4KIT JLIP Capture Pack.

PENTAX has prepared several special on-line "Getting Started" sections for each of its individual digital products. This information is available in our Learning Studio and they contain step-by-step instructions (complete with examples and visuals) to assist you in getting your digital camera up and running with your computer. Here you will learn the following:

The drivers for your device are not installed correctly. Please, follow the documentation, that came with your device to setup the software drivers. Generally: if no other piece of software (including the one, that came with the device) can connect to the video device, @ctiVideo will not connect either. Your video device is not compatible with Video for Windows. See the previous question and consult the documentation of your device to check if it is designed to work w/ VfW.

You can connect your internet camera with your home security system by Generic I/O Port. There are four I/O ports, two for input and two for output.

Our video systems are optimized to work the best over low cost broadband solutions such as DSL or Cable. While other options like phone modems, wireless ISP's and T1 lines are possible, we recommend DSL for its balance of cost vs. performance. Our system can utilize any high-speed DSL line that has a Static IP address. A Static IP Address is an address assigned to you that never changes and is the type of IP address that is required for professional systems.

Yes you can, by using one of these DVR cards. You can use a PCI DVR card to install on your desktop PC or a top of the range USB DVR card to connect to your PC/Laptop. It's compatible with Windows 2000/XP/98 and comes with all required software for video recording and editing. If you are computer savy you can even set up your own live Internet monitoring.

Yes. Most of the stations are equipped with built-in card readers so that you don't need your camera to be supported by the operation system ??" You just insert the memory cards (to be always on the safe side, change the switch to the write protection position first). Please feel free to ask for cable or external card reader if needed.

YES. The camera that comes with the TrueView Video Communication Kit is ergonomically designed for desktop conferencing. However, you can connect any video source to the Capture Card. Examples are: Camcorders, Video Cassette Players, Laser Disc Players etc.

The procedure for connecting the camera server to a network is almost identical to that of a standard PC-LAN connection. The camera server requires one fixed global IP address.

Yes, the CB-USB4 cable that comes packaged with the camera, is required for downloading images using the camera. The stock number for a replacement cable is (Item #200776). It can be purchased through the Olympus Emporium or by phone at 1-800-201-7766.

When Quickview installs it creates a directory in the following location: C:\Program Files\FLIR Systems\Device drivers. All the drivers required for USB and Firewire cameras are in this location. They can also be found on the Quickview CD.

When Researcher installs it creates a directory in the following location: C:\Program Files\FLIR Systems\Device drivers. All the drivers required for USB and Firewire cameras are in this location. They can also be found on the Researcher CD.

The very short answer is: you can't do this easily. There are problems between the USB-to-serial stuff; problems with printer drivers; and problems with OS X (or OS 9, etc) not knowing about either. The G3's, G4's and iMacs do not have the old Apple "DIN-8" connector (serial Localtalk) for modems and printers. These later Macs either use USB or Ethernet. Regarding the DIN-8 and Appletalk, see a related FAQ question for a description of that port. I don't describe Ethernet or USB.

Using TCP/IP Services (UCX) as the TCP/IP stack, it is possible to configure queues using the UCX$TELNETSYM (TCP/IP Services prior to V5.0) or TCPIP$TELNETSYM (with V5.0 and later) in order to print to Postscript printers. This assumes however that the printer itself can convert whatever is passed to it into something intelligible. As an example, if the printer has an IP address of 123.456.789.

No, not really. The SHU network printers are driven by Novell and are not compatible with Linux. In the future SHU might reconfigure the printers so that they can be accessed via Linux or Windows. Of course you can create your document, restart the laptop into Windows, then print your document using the appropriate Windows application. When I reboot my computer into Linux, it sometimes hangs, sometimes displaying something about my USB port, sometimes it just hangs.