The exact message looks like *** Error ('Could not claim the USB device') *** Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (e.g. dc2xx or stv680) is using the device and you have read/write access to the device. You have to make sure that no such kernel module is loaded and that you have set up the permissions on your USB device correctly, such that you have (non-root) write access to the camera device.

The exact error message looks like Could not find USB device (vendor 0x0000, product 0x0000). Make sure this device is connected to the computer You have to set up the permissions on your USB device correctly. See Section 4.3, "Setting up permissions for USB ports".

Note: Be sure to include your username along with all other details that will assist in helping us help you. Be descriptive; our support staff appreciates long emails. If you're getting error messages include

If you get an error message, please make note of the message, the error number and the time. Send an email to customerservice@securitybank.net. We will make every effort to resolve the issue as soon as possible.

Make sure you're using the four navigation tabs at the top of the page to navigate the sign up process. Using the 'Back' and 'Forward' buttons can erase your information. Also, check that you filled in the all the Sign Up forms' Required Fields indicated with an * and be sure you've clicked all the boxes for Terms and Conditions.

The software sharing device has either been removed from the system, cannot be found or the wrong license file has been installed. Reconnect the software-sharing device and/or re-install the license disk.

This message occurs with the Atrac Audio device if users have formatted the device using Windows. To avoid this message, re-format the devic...

Note: Refer to the Technical Manual (also included in the distribution) for general information on server installation, using the GUI handle administration tools, using the HTTP Proxy, other tools and features, batch operation, advanced server configuration, replication, splitting a handle server, and using a SQL database for storage.

Each USB port is treated as an independent USB path, and the performance of each USB port is dependent upon the detected USB device(s) within that USB port (point-to-point) device connection. Its performance will be limited to the least capable performance element within that ports connection. For example, if you connect a USB 2.0 high speed device to a USB 1.1 Hub, which is then connected to a USB port on the motherboard that connected USB 2.

Before inserting your USB memory stick, please log in to the machine directly (not via SSH from another system). Logging in at the console will ensure that the USB memory device is mounted with you as the owner. It is safest to insert the device into one of the USB ports on the front of the computer (rather than those on the back or on the keyboard).

It might seem that the USB device is fairly slow, especially when writing to the device. This is for two reasons: Firstly, USB devices are substantially slower than hard drives or other high-speed media; furthermore, larger-capacity flash memory devices are often slower for write access than low-capacity devices. Secondly, we mount the device in "synchronous" mode, which makes writes seem slower than the more common "asynchronous" mode.

Using a different password Offline to the one stored and used online causes this. If there is a conflict the user can get locked out of the system. If this happens contact your company administrator or Signifo Support who will issue you with a new password. You should log in to the live system using this and follow the instructions to select a new password. This new password should be used Online and Offline.

We "red tag" the device. This means that the device is placed out of service until it is repaired by a certified device repairman. After the device has been repaired, we recheck it to verify that it is in compliance.

No, Saffire is a Firewire 400 device. Firewire has a much larger bandwidth than USB 1.0, allowing Saffire to have multiple i/o and sample rates up to 192kHz. There are also two Firewire ports on the Saffire so that you can chain/connect additional Firewire devices to your computer, such as hard drives, even though your computer may only have one Firewire port.

Close all the files accessed from the USB Device. Click the green icon on the system tray. Click on "Stop USB Mass Storage Device" A window would appear "The USB Mass Storage Device device can now be safely removed from the system." Click "OK" and then unplug the USB Device. Note: The green icon do not appear on Windows 98SE Operating System. Just make sure no files are open and then remove the USB Device.

You can charge all Sony USB Walkman which is supported by this unit(Please refer the conpatibility list in this Web site).If the USB device has a current consumption below 500mA, you can charge it via the USB connection.

USB is an interface that allows for plugging/unplugging without turning off the power, fast and reliable data transmission, etc. It is now supported by various types of equipment, including printers, MFPs, scanners, digital cameras and portable audio-visual devices.

If you are experiencing problems with your USB product then the best thing to do is not to panic and maybe have a nice cup of hot tea first. Then we would strongly suggest formatting the device as this solves most problems (it is a bit like rebooting a PC).

A USB hardware device is cost-effective security hardware device and provides an innovative solution to a wide variety of computer security and information control issues. They are ideal for controlling access to network services, or anywhere a password, cookie, digital certificate or smart card is used today. If the KeyDrive secure volume is enabled, once the login information is verified, access is granted to the secure volume - on the local machine or on a network server.

Under certain circumstances the T8 will fail to recongize a USB device which is attached to the T8 before turning ON the T8. As a workaround, try turning ON the T8 first, then attaching the problematic USB device. This may allow the T8 to recognize the device properly.

Yes, we have a 200mW high power Atheros based USB device available now. It has three flavors: 802.11g with an integrated antenna, and with a RP-SMA antenna jack, and a 802.11a/b/g with integrated antenna.

Although the current hardware version of the device has a USB port, it is primarily used by developers as they create new device applications, ringtones, and services. If you see one, two, or three dots in your title bar ( ), this means your device is attempting to connect to the GPRS network. Specifically: Two dots mean that the username/password is being authenticated by the wireless carrier's data network.

You should be able to capture footage from your IEEE 1394 device directly to an IEEE 1394 or USB connected external hard drive, but some people have reported problems doing so. [edit]

Error messages like 'Error in pixel box server' or similar can nearly always be cleared by closing your browser and then relaunching it. If this does not clear the fault, please contact our support desk.

Enter the correct SMTP server. (Please note that web based email usually does not allow you to use their server. For example you may not use Hotmail, AOL or Yahoo mail to name a few.). Some servers require a username and password to send the mail. Contact your email provider to see if they are needed. Most often the user name and password are the same that you use to receive mail. If you do not remember them please contact your email provider.