The DSL modem is an external device that connects to your computer's network interface card (NIC) via a standard 10BaseT cable. Yes, but CCI Net will not provide network technical support. CCI Net will only provide technical support for the DSL line and the primary PC on which it was installed.

In order to use the VTel DSL Service with your computer you will need to install a 10BaseT network adapter (also known as an Ethernet card). Once you have installed the adapter you will simply connect it to the DSL Modem using a 10BaseT cable (provided with your modem). Your DSL Modem connects to the existing phone jack in your house and you are ready to go!

No. Our routers have internal modems.You just need to connect them to a DSL enabled line directly (or via a microfilter, or splitter faceplate). You will need to obtain an Ethernet Network Interface Card, such as the PCI network card commonly referred to as a LAN card. Please take great care not to damage your PC or touch any of the electronics when installing these cards on desktop or tower PC systems. Always read the instructions first.

There are several methods for computer connection, but it appears that Ethernet 10BaseT is emerging as the most predominant method. Although it probably would be cheaper to produce the cable modem as an internal card for the computer, this would require different printed-circuit cards for different kinds of computers, and additionally would make the demarcation between cable network and the subscriber's computer too fuzzy.

With the standard basic plan, you can only connect one computer to the modem. Please contact us for more information on needed equipment and install charges for multi computer environments.

Yes, as long as your ISP allows multiple IPs per customer, either by the use of a DHCP server or specific IP number leases.

Yes. The xDSL modem has a NIC (NETwork Interface Card) plugged into the Server. The HN100 will link with the xDSL modem via internal bus of the Server.

If you don't have high-speed internet, you will need to purchase a Network Interface Card and an Ethernet crossover cable. The NIC card sells for about $25 and the crossover cable about $10 at most computer stores. You will need to directly connect the Lighthouse to your computer using the crossover cable. If you have high-speed internet or any home networking equipment, the lighthouse comes with a 25 foot LAN cable ready to plug in to your network.

In most cases, yes. If not, we'll provide equipment for you at no charge. EarthLink Wi-Fi, however, requires specific equipment. Costs may be associated with the necessary equipment.

A DSL Modem is not a true modem (which stands for Modulator/DEModulator). It is actually a state-of-the-art all-digital device that communicates using 10BaseT network protocols and provides an "always on" connection to your ISP (Internet Service Provider). What this means is that you will be ready to "surf" the net as soon as you turn on your computer. It does not require an additional phone line, and you can use the Internet while talking on the phone.

When working through a network address translation (NAT) device like a Cable/DSL Modem, Router, or Firewall you will need to setup "Port Forwarding" on the device to forward the VNC port (5900 by default) from that device to the internal IP address of the machine running OSXvnc (the internal IP will look like 192.168.X.X, 10.X.X.X, or 127.0.0.X). For further details on setting up port forwarding please read your device's documentation or refer to the following helpful website: http://www.

Yes, the DSL Modem with Wireless Gateway can communicate with 802.11b or 802.11g wireless adapters, because the 802.11g standard is backward compatible with 802.11b. You can program your Modem to communicate on just one of the standards or both.

Allways start with a complete power cycle or two and reboot the computer. Your computer might be broken, breaking, or glitching. Sometimes other people using your computer accidentally misconfigure it. You can check our "How to" section for instructions and try to set it up again if your a do-it-yourselfer. If you can't fix your computer, your more than welcome to bring it in to a repair shop. We have been doing computer repair for 13 years if you choose to bring it to us.

Check that the cable is connected between the modem and the telephone socket. There may be 2 ports for it to be connected to use the line port not the phone port. If necessary unplug it, then reconnect it. If you are connecting from your business telephone line you may need to dial a number to get an external line (usually 9).

Most of these services are not available in much of our service areas. Cable modem and DSL are all dependent on physical wires, and a middle man ( i.e. phone company). With TazWire Wireless, there are no wires, and you deal directly with us-there is no middle man. TazWire Wireless wireless data transmission rates are comparable to cable modem or DSL.

Sure, you could do that, but it's not a good idea for several reasons. First, a vast majority of ISPs won't let you legally use a residential cable modem or a DSL line to host a public server. You would have to get a more expensive business package. Second, ADSL and cable lines usually have lower upstream bandwidth than downstream bandwidth, so your site may appear to be sluggish under heavy traffic. Third, DSL and cable lines have a much lower reliability than dedicated T1 or better lines.

In most cases, no. Some graduate residences may have existing coaxial cable infrastructure (for cable TV), which will allow them to subscribe for cable modem service at their discretion. Fraternities, sororities, and co-ops, particularly those which are privately-owned, may also have existing cable TV or non-Cornell phone service which could support cable modem or DSL.

Previously, we suggested that people use Mac modem cables; however, it has come to our attention that there is no one standard Mac modem cable. Since correct modem operation on a NeXT depends upon a correctly wired modem cable, buying a Mac cable is not a good idea. Some Mac cables do not allow dial-in and no Mac cable allows the use of hardware flow control. For these reasons, we are recommending that only cables that meet NeXT specifications be used.

If you plan on connecting only one computer to your DSL connection, a DSL modem will simplify the installation procedure. Use a DSL router connected to an Ethernet switch or an Ethernet hub. Ethernet switches and hubs are often called network switches and hubs. Click here for an example. Use a DSL modem connected to a Cable/DSL router. Cable/DSL routers are basically Ethernet switches (or wireless gateways) with routing functionality built-in, but still lacking an actual ADSL port.

No, at this time you need to use a modem that is compatible with HRI DSL. If you want to use a modem from another source, please check with us first to determine compatibility.

No. To maintain proper security you MUST first disconnect any system that will dial-up from a cable modem or DSL service. Users of cable modems or DSL service should consider using the Secure Nomadic Access service. The FAQ for SNA is here. SNA provides Web-based, secure, high-speed access to internal Headquarters computer resources.

Unlike DSL or Cable Modem, our service does not depend on telephone or cable TV infrastructure. This enables Phoenix Internet to reach many neighborhoods where DSL and Cable Modem are unable or unwilling to go. Our service plans offer performance comparable to DSL and Cable Modem, but with some important differences. Superior customer service because we are a local company and can be at your location within hours if necessary.

Xecunet DSL provides high-speed internet access directly to you over your telephone line, whereas cable modem offers high-speed internet access over a cable television line which means the bandwidth would be shared with everyone in the local loop. This then means that cable-modem access may slow down if there are too many people using it.

Enter your quote and service availability request information below to view, shop and compare DSL rates in "real time".

Yes. In fact, we recommend renting the modem as your best option as DSL technology is constantly changing. DSL modems are available for a monthly rental fee of $5/mo. and is included with the 3.0Mbps service.

Your broadband connection must have at least 90 KBPS upstream and downstream available for each phone line. Your cable or DSL modem must have an Ethernet port. USB-only modems are not supported.

A DSL modem is needed. Normally this is purchased when you sign up. There are many models of DSL modems on the market, but the models that are proven to work with the local phone company system are very select and few. Generally it is not advised to purchase a third party modem. DSL microfilters (provided with your DSL modem) are highly recommended to prevent interference of the DSL service with fax or phone lines.

Press and hold the reset button on the back of the Modem for 15 seconds. This will reset the unit back to its factory default settings.