NO! Adding ducts or pipe work will cause heat build up in the heater causing poor combustion and the motor to burn out. Adding ducts or pipes to the heater will void the warranty. There are no acceptable venting procedures that would allow a heater of this type to be used in an indoor, residential application.

NO! The kerosene, propane, or natural gas construction heaters may not be used for home heating, even temporarily. This heater is designed to operate on a construction site or similarly open environment. The heater can be used in semi-closed buildings if the proper amount of fresh air is provided per the instructions for ventilation air in the owner's manual.

You may use kerosene, number one fuel oil, or diesel fuel. You will notice an increase in odor when using diesel fuel. You will need to perform more frequent maintenance of the spark plug and filters. You may need to use an additive when the temperature gets below freezing to keep the fuel from congealing. This could be caused by low fuel supply, incorrect inlet pressure, bent fan blades, damaged or defective sail switch or fuel valve, or if the tank valve is not completely open.

NO! Our propane patio heaters are designed, tested and approved for propane use only. Conversion kits are not available. Propane patio heater regulators supply 11" WC and natural gas requires 7" to 10" WC. Also, propane gas line tubing is made of copper and natural gas requires stainless steel.

Hayward heaters can be converted to use NG or LP. The heater may require a new gas valve, burner orifices and/or air restrictor plate upon conversion. Hayward offers conversion kits through your local Hayward dealer. A licensed or certified gas professional will need to perform the conversion.

Natural and propane gas continue to be the best value for your energy dollar. Compared to electricity, natural or propane gas appliances can cost less than half as much to operate. As a gas customer you'll enjoy savings up to almost 50% on your heating, water heating, clothes drying and cooking costs! More importantly gas is a safe, reliable, and environmentally-friendly energy source. Back to Top

Natural gas can be connected to your home within a 4 to 6 week timeframe depending on the time it takes for the permit to be issued and the completion of the required paperwork. Propane gas can be connected within a 2-week timeframe. Back to Top Yes, Clearwater Gas is a full service gas energy company. In addition to providing economical natural and propane gas, we sell all types of energy efficient gas appliances.

Ans. If you want to change the heater from natural gas to propane then firstly change out the burner tray assembly and the electronic control module. But it is advisable to get ir done by an expert technician.

None of the forced air heaters can be used without electricity. The fan on the heaters requires 110 volts AC electrical current to operate.

A grill either uses a fuel such as propane, natural gas, or charcoal or it has an electric burner similar to one found in an electric kitchen range. The two kinds of gas that can be used with gas grills are Natural Gas (NG) and Propane Gas (LP). NG is usually connected to your house. It will cost more to install but is much cheaper to use. With NG you never have to refill the a tank.

same BTU rating as propane gas. Liquid propane gas contains 2,500 BTU's per cubic foot, natural gas contains 1000 BTU's per cubic foot. In addition, natural gas comes into your home through a pipeline from a local supplier. Propane is stored in a tank.

Natural Gas is different from LPG in a number of ways, but primarily because Natural Gas, or CNG, (Compressed Natural Gas) is stored in a compressed, gaseous state and propane is a liquid, fossil fuel bi-product of natural gas processing. Propane liquefies readily under pressure; therefore it is in a liquefied state when stored in the tank at 200 psi. LPG passes through a vaporizer where it becomes a gas and then through a low-pressure regulator.

Yes and No. Only North American made barbecues. The more specific answer is that you can definitely convert almost any barbecue over to another gas, but the cost will be dependent upon the type and brand of barbecue you have. Some manufacturers offer conversion kits that make things relatively simple. The least you will get away with is replacing the gas hose and the valves in addition to any fittings you need to connect everything together. Side-burners can further complicate matters.

Many propane appliances can be easily converted at a low cost. Consult your contractor about converting your propane appliances to natural gas.

Some log sets can be converted using a different pilot safety kit. Vent-free logs set come as a specific model for Natural or Propane.

With N. Gas you never have to run out! You will not have to schedule someone to fill your tank before it runs out.

Answer: Natural gas is a lighter gas than propane. Liquid propane gas contains 2,500 BTUs per cubic foot, while natural gas contains 1000 BTUs per cubic foot. It takes twice as much natural gas to reach the same BTU rate as propane. Natural gas enters your home through a pipeline from a local supplier and propane is stored in a tank.

We recommend that you contract a professional technician (such as a plumbing or heating specialist) to install your heater.

You can learn how to read your natural gas bill or learn how to read your propane gas bill on the Clearwater Gas Web site. Back to Top

No, your Minden Master Gas Grill is manufactured to exact specifications and is certified for Liquid Propane (LP gas) use only. For your safety, conversion kits are not available. Any attempt to convert your grill is dangerous and will void your warranty. We will provide a Natural Gas version of the Grill if the market demands. Please let us know if you are interested in an NG version, email grill@mindengrill.com.

Answer: Adding ducts or pipe work will cause heat build up in the heater causing poor combustion and the motor to burn out. Adding ducts or pipes to the heater will void the warranty.

Yes they are, we offer each model both ways and we also keep an ample stock of both natural gas & LP models.

A : No. While natural gas and propane fuelled appliances have similar requirements, they are governed under different regulations. For more information on regulations governing natural gas and propane appliances, visit our website at www.tssa.org.

Costs for different types of fuels vary tremendously throughout the US, and therefore so does the cost comparison. The formulas below can be used to compare equivalent energy costs (price per 1 million BTU's) among different fuels.

We do not have this information. GAMA does not manufacture heating equipment, although our logo may appear on the equipment to indicate that we have certified its energy efficiency rating. We suggest you contact the manufacturer’s technical assistance hotline or a local service representative. Your owner’s manual should provide that information. Contact information for the manufacturer of your product can also be found in our online membership directory.

There is no difference of power between natural and propane gas stoves. Since energy per unit for natural gas is lower than propane gas, the volume you consume for the same power during same time for natural gas will be higher than propane. This is compensated by the price difference of these two gas types. what i was trying to ask you is that you sell at least 3 stoves with different max BTU settings (50k,70k 130k) all for wok cooking. I am interested in the 9 inch ring model.

Current systems, including natural gas, propane, electricity services, etc. are all left in place as a back up when you switch to a Wind HOG.

Propane and natural gas are clean fuels. And when you convert, you can seal up the Dirty Port" that drastically shortens the life of your engine. Click here to learn more "Dirty Port".

Some manufacturers use valve configurations that allow burners to be field converted from one fuel to the other. Others will require that any conversions occur at their factory. Some will simply not allow conversions at all. Please check with your local hearth dealer to see what is required for conversion. In most cases, a trained technician should complete this work. The characteristics and pressure levels of propane and natural gas are different and as such require careful attention.