I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us.

There are a variety of "aftermarket" products that will allow you to add a USB card to your computer. Check with either your computer manufacturer or with one of the manufacturers of USB cards.

USB to Serial Support - Use a direct/single USB to serial cable, and stay away from multi-port "hubs". Unplug the serial cable to the weather station when changing PC connections, like from serial jack to USB jack. Power down the weather station before connecting the serial cable.

Yes but you must purchase a USB to Serial converter. We have the IOGEAR USB to Serial Port Adapter Model GUC232A available under RIGblaster Accessories. All of the software was written for serial port control so it will not work directly with a USB port. With the USB to RS232 serial adapter you can add the function of a serial port to a computer that doesn't have one or doesn't have and extra one.

First, make sure that you have the latest version of EasyGPS (ver. 1.3.7 as of this post). Then make sure you have the 'Use USB Box' checked. EasyGPS doesn't know about these models yet. Lie to it and tell it that you have a Map60C. They use the same firmware, and it will work over the USB connection. I'm using V1.3.7 of EasyGPS and yes, 'Use USB' is checked in my GPS settings, but I'm still having problems.

USB means Universal Serial Bus, an external bus standard that supports data transfer rates of 12Mbps. A single USB can be used to connect up to 127 peripheral devices, such as a mouse, modem or keyboard. USB also supports Plug-and-Play installation and hot plugging.

You can use a USB-RS232 converter cable to connect your computer with our instruments if you only have USB port. Please go to our products page to get this converter information.

The USB port is used to update Neurons Operating System as well as to load and store sound models, sounds and setups to/from external mass storage devices or computer networks. You may use it with external hard drives, CDR/CDRW drives or memory-stick type of storage devices. You may also use it to maintain a permanent connection to your computer (PC or Mac) for sequencing, editing and backup/storage.

No. The LEGO MindStorms Robotics Invention System 2.0 requires the use of a USB port directly on the back of the computer or a USB Hub connected directly to your computer. No Serial to USB adapters will be supported. Can the serial port IR tower from the LEGO MindStorms Robotics Invention System 1.0 or 1.5 be used with the with the LEGO MindStorms Robotics Invention System 2.0 Can the serial port IR tower from the LEGO MindStorms Robotics Invention System 1.0 or 1.

Yes, if you are a current member of the Sequencher Maintenance Program. Just contact us at support@genecodes.com, quoting your registration number. If you have allowed your maintenance program to lapse, it is possible to rejoin the plan with full benefits and receive the latest version of Sequencher. The cost of rejoining varies based on how long you have been off of maintenance, but it costs much less than purchasing a new license.

No. However, there may be some third party accessories that can convert the USB connection to the charger plug.

If the MicroScribe is connected to a non-powered USB hub, then you will need the external power supply. If the MicroScribe is connected directly to the computer or to a powered USB hub, then there is no need for the power supply.

Make sure that you are using the last version of GSAK (4.2 or higher--5.6 is the latest version). Prior versions didn't support USB.

The USB port on the back panel is a high-speed data port that allows transfers of data at a rate of 11 Mbps. It is not currently active, but is designed for future use.

After the CYBERKEY is inserted for the first time into the computer, the operating system performs a recognition process. When the process is complete, the CYBERKEY appears as a hard drive in the system, and can be used as any other drive. In a computer running Windows, click on the My Computer icon and look for an icon labeled as the removable storage device. Click on it and begin working. In a Macintosh computer, the CYBERKEY will appear as a removable disk on the desktop.

Yes. There are USB receipt printers, cash drawers and scanners available. If you don't see an interface type you are interested in, please call us.

Many PCs can be upgraded with a USB port. We only recommend adding one if all other minimum PC requirements, listed above, are met.

iMage USB webcam requires a high-speed USB 2.0 port in order to stream video at full resolution (640 x 480 pixels) and at full frame rate (15 fps) in real time. It will not stream any video to the host when it is plugged into a full-speed USB 2.0 or 1.1 port.

The camera requires direct power from the USB port; the camera will not work with any adapters. Your best option is to install a USB PCI card. We recommend that you check with your computer manufacturer for compatibility.

The wireless modem connects to your computer via a USB or Ethernet Port. You need to check which of these you have free on your computer before you order your Unwired modem. These ports are usually located at the back of the computer. You can find pictures of these on the System Requirements section of the Unwired website. Your computer's USB port allows you to connect external devices (such as printers, digital cameras, etc) to your computer.

You'll need to use the CubeSat Kit USB drivers. You can use the USB port as a simple terminal interface to the Flight MCU, or you can write your own software in the Flight MCU and/or the host side to do things like serial bootloaders, etc. Physical packaging issues dictate that a user module can connect to the PC/104 bus, and to either the PC/104-Plus bus or the CubeSat System Bus, but not both.

SOLUTION: The USB port is located in the center of the panel, between the 2 blue lights. Simply pull up on the silver panel located between these 2 lights.

A USB port is a small rectangular opening (often in pairs), usually indicated by the trident-like USB logo. They should be visible next to the other ports on the back of the PC. Most PCs made in the last year will have them. You will need to be running Windows 98 or later to be able to use your USB ports. Add-in USB port cards are available from most PC shops.

Although the current hardware version of the device has a USB port, it is primarily used by developers as they create new device applications, ringtones, and services. If you see one, two, or three dots in your title bar ( ), this means your device is attempting to connect to the GPRS network. Specifically: Two dots mean that the username/password is being authenticated by the wireless carrier's data network.