Most fabrics are too porous unless the are sealed and painted. Otherwise letters can be applied to any clean non-porous surface.

Vinyl Letters are very easy to install. Almost as you would put down a bumper sticker. Complete instructions are provided with each order. Also, see our Letter Application and Removal web page for instructions.

Feedback from our customers over the years, who have never done it before, have said that if you follow the directions, take your time and pick a day that is not too windy, it's easy.

DECORATIVE CONCRETE products can be applied to any concrete surface, vertical or horizontal. Wood surfaces must have a cement backer board such as Hardi-Board- or DuRock- applied to add stability and minimize flexing.

Color may be added to concrete by adding pigments-before or after concrete is place-and using white cement rather than conventional gray cement, by using chemical stains, or by exposing colorful aggregates at the surface. Textured finishes can vary from a smooth polish to the roughness of gravel. Geometric patterns can be scored, stamped, rolled, or inlaid into the concrete to resemble stone, brick or tile paving.

XYPEX is designed to penetrate and react with the mineral constituents of cement-based materials. It can be applied on concrete, concrete-block, cement stucco or the mortar between bricks.

Surfaces that get lots of abrasion or exposure to fuels or solvents are not recommended for coating. Fuel tanks, kitchen sinks which get lots of use, copper counters or bars that get lots of use or abrasion are not good surfaces for coating. They can be coated however they may need touching up frequently. Hard vinyl signs and vinyl siding have successfully been refinished with EVERBRITE?. If in doubt, test a small inconspicuous area.

Depending on the degree of curve, size and shape of Dome, type of adhesive and surface, it may well be possible to have Craft design and test to meet this need. Domes?, Hibosscal?, Top Chrome Hibosscal?, FlexScript?, and LensLite? are registered trademarks of Craft Originators Inc.

blik can be applied to other smooth surfaces such as ceilings, glass, sealed concrete floors, smooth metal, tile, plastic surfaces and finished wood furniture. Keep in mind, the less porous the surface the more effort it will take to remove blik.

JaDecor can be applied over most surfaces except wallpaper. New or existing sheetrock, plaster paneling, brick and concrete may be covered.

The items required to install vinyl letters are masking tape, household cleaner (for clearing the surface), and a squeegee (which is provided with your order). See our Letter Application and Removal web page for instructions.

With a little heat from a hair dryer, the edges of vinyl letters can be lifted so the letters can be removed. See our Letter Application and Removal web page for instructions.

Nansulate® Translucent PT and Nansulate® Translucent High Heat are formulated for excellent adhesion to Nansulate® Translucent GP is formulated for excellent adhesion to a variety of non-metal surfaces. Wood,

Hard vinyl signs and vinyl siding have successfully been refinished with EVERBRITE™. If in doubt, test a small inconspicuous area.

Yes. Most vertical applications are applied in single coat applications. ELMS? products have excellent sag resistance and can be applied at 20 ? 25 mil thicknesses in a single coat. Contact Green Products, LLC at (877) 474-7481 for technical application data.

Elite Crete can be applied to pool decks, pool interiors, water park rides, driveways, sidewalks, patios, warehouse floors, all types of vertical building surfaces and even interstate bridges and airport runways over such surfaces as steel, concrete, foam, masonry, and aggregate.

Any non-porous surface such as, melamine, formica, plastic, glass, ceramics – tiles, paint and varnish, stainless steel, aluminium, enamel and many other surfaces, even radiators.

Virtually every other sign company on the planet charges first by the height of the vinyl letters multiplied by the quantity required. This pricing method may be good for the sign company but it certainly doesn't favor the consumer. This "old-school" pricing formula actually penalizes customers who often end up shortchanging themselves in an effort to save money by sacrificing on both the letter height they should have and the number of words they really need.

Vinyl lettering is impervious to all weather conditions and can be used wherever it is needed or desired.

No. Once removed, the vinyl letters cannot be reused. The letters are usually damaged during the removal process.

Installing custom vinyl letters, vinyl numbers and vinyl graphics can seem like a difficult task. But, when you break it down into steps and take your time, you can achieve outstanding results the first time. There are 2 basic methods for applying your custom vinyl graphics. Wet or Dry. If your vinyl graphics are small then the Dry method is fine. For larger custom vinyl graphics that might require repositioning then the Wet method is your choice.

No. If anything, any wax first needs to be removed. We recommend that your boat surface be free of any dirt, grease or wax. This can be done by using Isopropyl alcohol, methyl hydrate or acetone. Be sure to test is a small inconspicuous area of the boat first to make sure whatever cleaner you use does not damage the surface.

A few years ago almost all custom banners were made using applied vinyl. The basic method is that you start with a completed blank banner with hems and grommets. In our example here we started with a yellow 4x6 foot banner. We then take the color of copy you want to use(in this case red and black) and place the vinyl roll in a plotter. Using a computer the plotter will then "cut" out the lettering according to your proof.

Yes, you can colour soft plastic & vinyl surfaces such as dashes and door panels etc. with VARIBOND.

Once you have spoken with your counselor and submitted proper documentation, your counselor will provide letters for you to give to your instructors. You may pick up your letters at the ASD front desk in WB 146.

Yes, dry ice blasting can be applied on hot surfaces. Due to the big difference in temperature, this cleaning method can be even more effective when the surface to be cleaned is hot. Even hot moulds such as ingot moulds in foundries can be cleaned online. Due to the very high cleaning performance, ASCOJET Dry Ice Blasting has only a minimum effect on mould temperature allowing virtually continuous production.

Yes. There are many applications for using the same vinyl letters or vinyl graphics including truck doors, vans, bug shields, motorcycles, jet skis, snowmobiles, storefront windows, mailboxes, jet skis, motorcycles, ski-doo's or any smooth, glossy, clean and dry surface.