Braced Panels, Exterior (BP)Brace panels are used as lateral reinforcement to walls enhancing the stiffness of the Structural Plywood, etc.) for an 8' high wall covering a minimum of four studs for 16" o.c. stud spacing and three studs for 24" stud spacing. Let-in bracing and/or approved metal strap bracing is not permitted in this seismic zone. Max. height: 12' (Note: This would require a minimum 4' 9" wide brace panel because the maximum height to width ratio 2 1/2:1).

edge, 12" field for 3/8" or 3"edge, 12" field for 1/2" structural, one face1ABP can extend max. 12" over an opening in the wall below, with the opening having a min. 4" x 12" header

Basically they can be. The only thing to consider with exterior countertops is that they are subject to the elements. Rain, hail, snow, freezing and sunlight. These factors should be put into consideration when planning and building an exterior grade concrete countertop. Make sure the finish will hold up and the concrete uses colorfast agents to maintain its look.

Yes. Our material is natural stone and is sound enough to handle extreme frost/thaw conditions of the exterior and light enough to be designed into interior plans.

Exterior: we call for 1x tongue and groove planking (plywood can also be used; however, it's more labor intensive as well as creates considerable waste of material), with either wood [cedar] shakes or shingles, or asphalt or fiberglass-impregnated asphalt shingles. However, a metal (aluminum alloy) roof can also be installed [over the sheathing base of the planks or plywood]. Interior: we call for drywall (a.k.a. gypsum board, sheetrock, or plaster board); however, t&g planks can also be used.

All of Halcyon Solar Shades as well as Pheifer SheerWeaves are all applied to the interior of your home.

Keeping the Statim cassette clean is good clinical practice. The interior surface of the cassette should be cleaned at least once a week with a mild, chlorine-free dishwashing soap. To promote quick drying, we recommend spraying the cassette lid and tray with Stat-Dri after each cleaning. For detailed instructions concerning cassette cleaning and the use of Stat-Dri, see the Statim Operator's Manual.

One of the most important considerations in defining the end use performance is weatherability. Outdoor exposure results in absorption of ultraviolet energy. This energy can attack the organic binder and result in gloss loss and color change. Due to a tendency to chalk, epoxies and epoxy containing hybrids are generally not recommended for outdoor use when aesthetics is a primary concern.

A container that is going to be shipped internationally must meet several requirements. The container must be surveyed by a certified marine surveyor to ensure that the integrity of the unit is structurally sound. The unit must have a current CSC Plate (Container Safety Convention) if the unit is 5 years or newer or a valid ACEP sticker (Approved Continuous Examination Program) if it is 5 or more years old. If a unit does not have these, it will be rejected for loading on the terminal.

Answer: Interior will have a standard 7' height with a option to go to 7' 6". Exterior height is 12' 10" at the top of the AC unit.

What do primers and sealers do? The goal of both is to make the finish coat (topcoat) look better and last longer. They do this by providing a variety of properties such as: Stain blocking - preventing stains (e.g., water stains on wallboard, ball point pen ink, or resins fron a knott in a wood surface) on the original surface from bleeding through the topcoat and becomming visible.

The complex can be accessed through numerous exterior entrances. The suites are entered from central interior corridors.

The panel bracing and shoring should be designed by a professional engineer, and the shores should be braced against lateral movement separately from the panel. All members should have firm bearing on adequate foundations, and the connections should be fixed before releasing the panel from the crane.

Step #1 With a flat screwdriver, gently pry the speaker cover off. It helps to cover the screwdriver(s) with masking tape to prevent scratching. Remove the three #1 Phillips head screws around the speaker. These are deeply recessed, and are not the three screws that hold in the speaker. Step #2 Pry open the small black screw cover near the chrome door handle. Pry from the front, this cover is hinged in back(I think!). Remove the black screw with a #00 Phillips.

Interior drywall can is attached directly to the form webs using conventional drywall screws. Exterior finishes (over the insulation) include stucco, siding and brick or stone. Below grade applications require exterior waterproofing.

Primers are designed to prepare surfaces for painting; exterior primers also must withstand harsh weather elements. Alkyd and latex based primers are effective stain blockers and all-around primers for both interior and exterior applications. For exterior application on wood, it’s best to use a top-quality acrylic primer that is recommended for exterior wood. Latex primers work better if the wood is heavy with tannins. Acrylic block fillers are used to prime concrete block.

Don't limit yourself to thinking that tile can just be used indoors. It is an ideal patio covering and for decorative front-porch stoops. You can permanently adhere tile to pre-cast concrete walking pads to create stunning garden stepping stones. But if you decide to use ceramic tile outdoors, be sure these tiles meet slip-resistance minimum requirements. Exterior tiles have a surface texture that helps make them slip resistant.

Winslow Developments is directing their own Property Management Department, which will be in control of the Management & Maintenance of the external areas; such as the landscaping and 24 hour security. The internal common areas, such as, facilities, staircases, foyers, etc will also be maintained by Winslow's staff.

Exterior graphics are premium grade vinyl graphics printed with solvent-based or UV inks to withstand the effects of weather and exposure to UV light. Interior graphics are printed on thinner, less durable vinyls, using inks which do not withstand outdoor exposure. Exterior graphics are available with 1-year, 2-year, 5-year, and 7-year life expectancy.

All films except for extremely rare circumstances are applied on the interior surface of the glass. Exterior films are applied for two reasons. One, if for any reason a window is not accessible from the inside, an exterior window film would then be your only option unless the glass is pulled out from the frame. Two, you are applying graffiti film.

Answer: Routine maintenance is essential in keeping a log home as efficient as possible and in preserving it’s natural beauty. The amount of sun, rain and wind determine when you should refinish the logs on your home. Depending on the type of sealant that was used you should consider refinishing and sealing every three to five years. Inspect your logs for any large checks or cracks that catch water. Seal them to prevent premature rot and decay.

The maintenance of the interior of each apartment is the responsibility of the owner while the exterior maintenance is the responsibility of the body corporate.

Just as a potential buyer wants to see the interior and exterior of the property before determining a purchase price, the assessors want to see the interior and exterior of the property to make an accurate determination about the market value of the property. The interior information of a property is essential in determining the estimate of market value. Without the actual information, estimates of the interior information have to be made.

The price is not increased for interior treatment. The primary cost for General Pest Control is in the exterior treatment. The interior service is treated on a complimentary basis.

Yes, of course. You may choose any scenes or rooms to be represented in the virtual tour of each property. Exterior shots are weather permitting.

Yes. Before installing, a continuous vapor barrier of either plastic or foil film must be placed between the hardboard panels and the supporting structure (studs) to stop moisture from transferring into the back of the hardboard panels. If this is not done, warping or buckling is likely to happen.

Yes, stucco color coat may be successfully applied to a portland cement base substrate in an interior application.

Many factors can contribute to that. 1. The quality of the paint used is of the utmost importance.2. The amount of traffic through a particular area.3. Whether or not there are smokers in the home.4. Is there a fireplace that is used on a regular basis during the winter months, and does the damper work properly ?5. How many children and their ages ?There are too many factors to take into consideration, and each home can be different.

From aluminum composite to stone to cement to glazing panels, you'll find the product that's right for your project.

The decision about which brace to wear depends on the type of curve and whether the patient will follow the doctor's directions about how many hours a day to wear the brace. There are two main types of braces. Braces can be custom made or can be made from a pre-fabricated mold. All must be selected for the specific curve problem and fitted to each patient.