A. The Targus USB Mobile Port Replicator with Ethernet is the world’s smallest expansion hub that provides instant peripheral device attachment and Ethernet via a single USB connection to Windows 98/ME/2000 based computers. Packaged in a small and attractive enclosure, the PA090U can fit any place on a desktop space. Add devices like mice, keyboards, joysticks, network, printers, PDAs, scanners, speakers, cameras, telephones and many more without rebooting your computer.

The wireless modem connects to your computer via a USB or Ethernet Port. You need to check which of these you have free on your computer before you order your Unwired modem. These ports are usually located at the back of the computer. You can find pictures of these on the System Requirements section of the Unwired website. Your computer's USB port allows you to connect external devices (such as printers, digital cameras, etc) to your computer.

Either one will work with the cable modem and service Wave provides. However, not all computer systems allow for a USB installation. Before your Internet installation, you must have a computer with a USB port, or have a 10 Base T Ethernet card installed in your computer.

Some DSL modems carry USB capability. This is useful alternative in instances where a network card cannot be installed. Please note that you cannot use the USB port of a usb HUB to extend the wire length between your modem and PC, or share the access to multiple systems. You can use the USB and Ethernet ports at the same time to facilitate access on two machines provided the advanced modem routing features are enabled.

The wireless modem connects to your computer via an Ethernet Port. The Ethernet port is located at the back of your computer If you do not have an ethernet port there are other options. Call you nearest reseller.

First, make sure that you have the latest version of EasyGPS (ver. 1.3.7 as of this post). Then make sure you have the 'Use USB Box' checked. EasyGPS doesn't know about these models yet. Lie to it and tell it that you have a Map60C. They use the same firmware, and it will work over the USB connection. I'm using V1.3.7 of EasyGPS and yes, 'Use USB' is checked in my GPS settings, but I'm still having problems.

USB means Universal Serial Bus, an external bus standard that supports data transfer rates of 12Mbps. A single USB can be used to connect up to 127 peripheral devices, such as a mouse, modem or keyboard. USB also supports Plug-and-Play installation and hot plugging.

You can use a USB-RS232 converter cable to connect your computer with our instruments if you only have USB port. Please go to our products page to get this converter information.

The USB port is used to update Neurons Operating System as well as to load and store sound models, sounds and setups to/from external mass storage devices or computer networks. You may use it with external hard drives, CDR/CDRW drives or memory-stick type of storage devices. You may also use it to maintain a permanent connection to your computer (PC or Mac) for sequencing, editing and backup/storage.

The outer sleeve will have a sticker that indicates the connection type. The USB port will be to the right of the power jack on the back of the Unwired modem. The Ethernet port will be diagonally across from the power jack.

Absolutely nothing at the moment. All three are disabled. Some people have reported that USB keyboards work, but it's not a supported feature. Others have also powered a PC cooling fan off the USB, but that really isn't necessary. Just keep it well ventilated and it'll be fine.

The 500/4 only interfaces to your equipment via Ethernet. The 500/1 can use either USB or Ethernet - both ports are available on the one unit but there is a slider which covers whichever port is not in use. No. BT Business Satellite uses a 'two way' satellite connection, which means that all Internet content is sent and received via satellite. There's no connection to a phone line.

Yes, if you are a current member of the Sequencher Maintenance Program. Just contact us at support@genecodes.com, quoting your registration number. If you have allowed your maintenance program to lapse, it is possible to rejoin the plan with full benefits and receive the latest version of Sequencher. The cost of rejoining varies based on how long you have been off of maintenance, but it costs much less than purchasing a new license.

Yes, you will have to register twice: once for the wired Ethernet connection and once for the wireless connection.

External adaptors are available for both desktop and laptop computers which connect to either a USB port or PCMCIA card slot.

The WLA660's Ethernet port (RJ-45 jack) supports 10 Mbps over a 10Base-T connection (half-duplex only).

The MasterList is a relational database, and, as such, is subject to corruption due to sudden shut downs or power disconnection. We have found that single users often do not have a consistent backup strategy at their PC. Our TML Replicator is a tool that is highly recommended for backing up The MasterList database in those situations, as a stop-gap for those who do not have a consistent backup utility on their PC.

I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us.

No. However, there may be some third party accessories that can convert the USB connection to the charger plug.

If the MicroScribe is connected to a non-powered USB hub, then you will need the external power supply. If the MicroScribe is connected directly to the computer or to a powered USB hub, then there is no need for the power supply.

Make sure that you are using the last version of GSAK (4.2 or higher--5.6 is the latest version). Prior versions didn't support USB.

The USB port on the back panel is a high-speed data port that allows transfers of data at a rate of 11 Mbps. It is not currently active, but is designed for future use.

After the CYBERKEY is inserted for the first time into the computer, the operating system performs a recognition process. When the process is complete, the CYBERKEY appears as a hard drive in the system, and can be used as any other drive. In a computer running Windows, click on the My Computer icon and look for an icon labeled as the removable storage device. Click on it and begin working. In a Macintosh computer, the CYBERKEY will appear as a removable disk on the desktop.

Yes. There are USB receipt printers, cash drawers and scanners available. If you don't see an interface type you are interested in, please call us.

Many PCs can be upgraded with a USB port. We only recommend adding one if all other minimum PC requirements, listed above, are met.

There are a variety of "aftermarket" products that will allow you to add a USB card to your computer. Check with either your computer manufacturer or with one of the manufacturers of USB cards.

iMage USB webcam requires a high-speed USB 2.0 port in order to stream video at full resolution (640 x 480 pixels) and at full frame rate (15 fps) in real time. It will not stream any video to the host when it is plugged into a full-speed USB 2.0 or 1.1 port.