Black screens on some ROMs only may indicate that there is a problem with the emulation of that ROM or that you have an old version of the emulator. Please verify if a newer version exists and, if not, please contact the author.

Make sure the phone is turned on and fully charged. If your battery is drained it will shut off the phone, which results in a black screen. You must charge the phone and use the power button to turn it back on.

You need to install the latest version of Microsoft Windows Media Player. Click here to go to Microsoft's website where you can download it. You need to install the latest version of Microsoft Windows Media Player. Click here to go to Microsoft's website where you can download it.

You are using night vision. Simply turn the night vision off and the video screen will return to color.

This is a known problem with the ATI Mach 64 video card. The problem is that this card uses address 2e8, and the fourth serial port does too. Due to a bug (feature?) in the sio(4) driver it will touch this port even if you do not have the fourth serial port, and even if you disable sio3 (the fourth port) which normally uses this address. Disable sio0, sio1, sio2 and sio3 (all of them). This way the sio driver does not get activated -> no problems.

Try to disable video acceleration in Settings -> Control Panel -> Display -> Throubleshooting, during the screenshots. Or start a second player instance and try to capture it. Bug report (Windows 95): In the thumbnail window, when I click on a thumbnail, nothing happens, the image will not be displayed in the main window! You have an old version of the "comctl32.dll", please update this Windows component from the MS homepage, search for Comctl32.dll update.

Your monitor resolution is set larger than the display area of the software. Space Update runs at a resolution of 640x480 pixels, while Earth Update runs at 800x600. To get the software to run full screen adjust your monitor settings in your System's Control Panels. The closer your settings are to this resolution, the closer the software will be to filling the screen.

There could be many different reasons. First of all, check carefully that your camera has been turned on. You can try to use third-party software to see if you see any video from the camera. If you still do not see any video, contact the camera's manufacturer for technical support. The chance is that your camera driver is not compliant with Microsoft's Video for Windows???. You may want to check with your camera vendor to confirm this.

The standard television screen proportions are 4:3 or 1.33:1, however theatrical movies are filmed in a variety of wide screen formats such as 1.85:1, 2.15:1 or 2.35:1. When widescreen movies are show on a standard television, there are two options for displaying the picture. The first option is "pan-and-scan". This is a method of cropping the full frame of the movie, so that it fills a 4:3 screen.

BCAdmin is unable to communicate with any BreadCrumbs. However, personal firewall applications may be preventing BCAdmin from communicating with the BreadCrumbs. Windows XP Service Pack 2 also blocks communications with BreadCrumbs by default.

First, does an error message appear on the bottom of your screen? If there is a message, consult the list of messages to help solve your problem. If you have no message, just the banner, then the channel you are tuned to is most likely scheduled to broadcast a major sporting event in the very near future. Scheduled programming will begin broadcasting an hour or two before the start of the event.

Today, many programmes are produced in a widescreen format with an aspect ratio of 16:9, or are films made in widescreen for the cinema. They are often transmitted in widescreen on digital services. In order to show more of the width of the scene as the director intended, small black bands are placed at the top and bottom of conventional analogue 4:3 aspect ratio screens. Digital widescreen sets do not show these bands, and most widescreen TVs allow the viewer to "zoom" into the picture.

There are a few reasons for this, but the main one is extra files in the rom folders (e.g. the zip file from which you extracted the roms. RedSquirrel will quite happily load zip files and try to run them as arm code.

Your display settings exceed the capabilities of the LCD monitor. You must reduce the settings. Reconnect the original monitor into the video card and reboot to Windows. Reduce the refresh rate to 60hz and reduce the resolution to 640x480 pixels. Reconnect the LCD monitor back into the video card and boot the computer. You should have a picture at this time. Make your adjustments once in Windows. Refer to your user's manual for resolution settings.

If you have a card with 8MB of video memory, first try telling the X server that there is only 4MB present by adding the following line to the Device section of your config file: Videoram 4096 If you have a 4MB card, or if the above line doesn't help, try adding the following line to the Device section: Option "nolinear" A drawback with this option is that colour depths higher than 8bpp can't be used, but that is better than nothing.

This typically occurs if there is a device between the client and the server that is receiving packets but not passing them on. One way around this problem is to change the MTU size for the network adapter that is being used as a terminal server connection to clients. Ethernet uses a maximum MTU size of 1500. You can start with 500 and then slowly move up until you notice the problem to find the correct value to set

The only reason imaging works is that after the image is applied, a mini-hardware detection process is run through, which notices differences in things like network and video cards in your computer relative to the computer where the image was taken, and installs the correct drivers. But there are some things that are so low level that they cannot be handled by this process. One of these is called the Hardware Abstraction Layer (HAL).

This happens when the server is running on a machine with an unsupported color depth. The color depth must be 16-bits or 32-bits. Resolve this by changing the server screen resolution to either 16-bits or 32-bits.

If your unit is using an S-Video connection, try replacing the cable. Often, a broken pin in the connector can cause this problem. If your unit isn't using an S-Video connection, press and hold down the power button on the front of the machine until you see the words "Please Wait a Few Moments".

This is caused by the Closed Caption/Text mode being set to Text. You can disable the closed caption by doing the following: If you are still experiencing problems, please contact Customer Service for further assistance at 888.8.ASK.SVA.

Make sure your Cable Box is set to 16:9 fit aspect ratio. When a TV program is broadcast in High Definition, the screen will extend in full length. All Non-HD broadcast programs will have the black bars since it was meant to be viewed in a 4:3 fit aspect ratio.

This occurs when you uncheck the "Borders" option, which is available under the Display drop-down menu. When setup through a proxy server it is common to receive a" no authentication server error" due to cookie permission. To avoid this error please enable the option that reads "Allow cookies that are stored on your computer". You also want to enable the option that reads "Allow per session cookies not stored". These options are available within the control panel under "Internet Options".

Some cases have been reported where SimAQUARIUM plays the bubble sound but the screen is all black when the program is running. To fix this problem try below steps: Step-1: Try pressing key 2 on the Numpad area of your keyboard to set light and colors to their default values. Make sure that the NumLock key is enabled first or the screensaver will exit back to desktop. Step-2: If Step-1 doesn't help, go to your WINDOWS folder and find and delete ssconf2.bin and ssconf.

The Fresh Desktop Screen Saver uses the pictures selected on Fresh Desktop. If there has no picture selected, the screen will be black.

If you are concerned about your own hearing you should make a time at an audiology clinic to have a hearing test.  The VIHSP equipment is not suitable for adults.

Vista's booting process is a litle bit slower then XP at it's current stage, the black screen only appears for about 15-120 seconds deppending on your system. NOTE: This problem has been resolved in newer builds. It is reccomended that you install the latest build that is available.