Screw Clips twist into the foam-board insulation. The tubing snaps into the screw clips. Then, wire mesh (remesh) and/or rebar is laid over the tubing. When you pour the concrete, pull the wire mesh to the middle of the slab. Be careful not to pull the tubing up with the remesh when you pour. Many people prefer to use fiber-reinforced concrete so they don't have to install wire mesh.

Mohawk Engineered & Longstrip (glueless) Hardwood Floors can be installed over most concrete slabs (not solid hardwood). The concrete slab must be fully cured for at least 60 days, free of structural defects, clean and visually dry with no history of moisture problems. When testing for moisture, Mohawk suggests utilizing the industry-standard calcium chloride test or the Tramex Moisture Encounter (5 max).

With the improvements in hardwood floors most engineered and longstrip engineered plank floors can be used over a concrete slab. Manufacturers do not recommend using solid wood floors over a slab. Engineered planks and strip wood floors can be glued directly to a clean, dry, well-cured concrete slab. Some engineered wood floors can be glued at the tongue and grooves and then allowed to be floated over a special padding that is laid over the concrete slab.

Screw Clips are used to secure the tubing before pouring your concrete slab. They twist into the 2" foam-board insulation under the concrete and the tubing simply snaps into the screw clip. We recommend Screw Clips placed every 30 inches.

Yes, you can install solid wood boards on a concrete slab. As 3/4'' boards must be nailed and not glued, you must first install a wood subfloor (plywood or OSB panels).

It is not recommended to install solid wood flooring over a concrete slab. Although this is the general rule, there have been successful installations of solid wood flooring installed over dry, concrete slabs. This entails several additional steps. A plastic barrier is set over the slab and taped at all seams. Then some sort of moisture-resistant wood subfloor (marine plywood) is built on top of the plastic film. Then the flooring is nailed to the wood subfloor.

This is the name given to the action when a knee reaches full extension and just as the knee locks into hyperextension the knee rotates in an outward direction just a few degrees. This has the effect of putting most of the weight onto the cartilage, menisci, and bones of the joint while giving a rest to the muscles of the thigh and calf. What allows for this is that the medial femoral condyle is slightly curved and the medial condylar notch is slightly longer than the lateral condylar notch.

Although the vast majority of our buildings are constructed on our superior floor system and sufficient for any application, we do have the ability to construct your Heartland building on an existing slab provided the slab is level within ?" and appropriately sized. Because of the individual nature of each slab, please contact us to determine if your slab meets our specifications.

A - The slab may be of any size sufficient to stop the bottom of the mast pushing down into the ground but a standard paving slab (as opposed to just a paving stone) of about a foot square and two inches thick would be more than adequate for most situations. A piece of ground treated, solid, timber would do just as well.

Bob, if you won the lottery what would you do to your home? (From your friends at the Remedy Building)

Any reputable installer will insist you consider getting a moisture test done if your slab is less than six months old. If the moisture content in the slab is higher than 3% the installer may suggest the use of a moisture barrier to protect the timber flooring while the slab continues to dry.

Not necessarily. However, it is simply a matter of what the purchaser wants. The building will be built on pressure treated skids and they will sit on top of the concrete. The most important thing is to ensure the site is level prior to L'il Barn Builder constructing your building.

Yes. You will need to make your sales representative aware of this, so the materials can be figured properly. Anchor bolts will need to be placed in the slab on 3' centers prior to construction. Ask your sales representative for an anchor bolt layout; this will need to be used when the concrete is poured. Back to Top

Trusteel is not a concreting business however we can arrange for a concrete slab to be laid or you can engage a local concreter to undertake this work. Until a site visit has been undertaken, the concrete price quoted is a "budget price". The finalised price will be based on a 100mm (unless otherwise stated) thick, reinforced concrete slab with allowances made for any fall that may require filling on site or access restrictions.

No, all concrete slabs shall have six inches by six inches wire mesh for reinforcing with four inches of concrete and four inches of compacted gravel or sand. Exception: Basement floors are not required to have wire mesh.

You can install StoneDeck over a concrete slab but it would be more cost-effective for you to use a stone without our system’s special composite backing.

Yes, The Porta-Slab comes with a one year warranty against defects in materials and workmanship. It is made out of high density Styrofoam and has a Rhino guard truck bed liner finish in grey. The unit can be painted so the little part that you can see can be painted black or what ever color matches your decor. We also have a plastic slab that ships UPS and comes in two boxes of three pieces each. when placed on the ground they provide an 8x8 foot area for the spa to be placed.

There are several types of mesh used in hernia. Each of these materials is made of special kind of plastics that are compatible with living tissue. Surgeon will select the mesh that is best for the site and size of the incisional hernia.

If the question is can a 3/4" hardwood floor be installed directly on concrete, the answer is "I wouldn't if I were you". If the question is can a 3/4" hardwood floor be installed over top of a concrete slab, the answer is "Yes". Our showroom is a perfect example of that. Can you nail hardwood into concrete? No.

Concrete hardens as a result of hydration, that is the chemical reaction between cement and water. Hydration occurs only if water is available and if the concrete's temperature stays within a suitable range. After placing concrete, the concrete surface needs to be kept moist for a period of time to permit the hydration process. this period is referred to as the curing period and is usually 5-7 days after placing conventional concrete.

It can read the moisture as a relative reading; in other words it will give an indication of a problem area, but will not give a definite moisture content. There are constituents in concrete that can cause the moisture readings to be in error, but as long as the concrete is homogeneous, the error will be constant. Example: If the slab reads approximately 12% moisture in all areas but one area is approx. 20%, it can be assumed that this is a problem area.

When considering the FRL upgrade of Concrete elements thorough investigation is required and some of the salient points are:

When editors look at samples of your work, they are primarily interested in your writing style and mastery of the craft, rather than where the sample was published or how much you were paid. Therefore valuable first clips can result from offering to write for an organizational newsletter, your community newspaper or any other small-circulation publication that is desperate for decent work.

A : While this is not the preferred method, your installation can be laid over top of existing concrete walkways, providing there is not substantial heaving in the existing area. Several other issues need to be addressed. First, the grade will need to be raised by about 3" (the thickness of the bricks plus bedding sand or bonding agent). This is particularly critical if any doorways are involved.

Certain floors are made specifically for concrete sub floor installation. You may either glue down the flooring directly to the sub floor or use a floating floor installation. Just make sure the manufacturer of that flooring recommends the specific installation method you use.

Use either a back wall drain or the 2x4 platform method. See our Installation Instructions for specific directions.

Basement-foundation plans are included with all houses. However, we dimension the foundations in such a way that they can still be used with slab or crawl spaces with very minor changes for your contractor, or slab and crawl-space foundation plans may be added to blueprint and mylar orders for an additional $50.

The bonding surface offered by the concrete should not be overlooked. The surface should be unpainted without contamination from compounds such as formwork releasing agents, oils, grease, etc which may impede the proper adhesion of the Vermitex 'AF'.

Yes. National Barn Company uses a 2 x 6 CCA treated bottom plate around the bottom of the building. This board can be used as a form for pouring a concrete slab. Concrete can normally be poured through the large door opening. If the concrete contractor requires additional access to pour the concrete then some wall metal could be left off and installed by the customer after the concrete is poured.

Maybe. Most of our divisions can coordinate the concrete for your building, but this is typically limited to 150 mile radius of their office. Ask a sales representative for specific information. Back to Top