The short answer is to boot from the FreeDOS Install Boot Floppy. When your system comes up, just type: After that's done, remove the floppy from the A: drive, and reboot. Your system is now running FreeDOS.

No. This would require Apple System Software, involving issues similar to those mentioned above for ROM images. Except that System Software may be downloaded freely from Apple. Maybe someday. The next computer that I plan to emulate is the Mac II, which has color. (See bounties) Meanwhile, you could try Basilisk II. It might be possible to hack the ROM of the Mac Plus to support larger screen sizes.

The FreeDOS kernel (even as late as build 2017f) still contains the bug for 512MB disks. Do not use this kernel if you plan to access - even read - a disk partition bigger than 512MB. If you do, you will find that your drive is corrupt, and you will need to reformat and re-install your software. This is a well-known bug with large hard disks, advertised on the FreeDOS sites since Aug 12 1998. The reason for the delay in releasing the new kernel is that I'm trying to track down a serious bug.

It is possible to use an external drive as a startup disk (boot volume) on Mac OS 9 and Mac OS X. Follow the instructions in your Mac OS manual for the proper installation of the Mac OS. If you wish to use your drive as a boot volume, make sure you install the Mac OS on the drive before saving any data to the drive. On Windows operating systems it is not possible to use an external hard drive as a boot volume. Yes, the 2163 does support 48-bit LBA.

File recovery becomes instantly more difficult in this case. Most recovery programs will need a place to copy recovered data, and if you are using the same drive which has the lost data on it you have no guarantee that you will not be destroying more data than you save. It's a far better idea to either install a new hard drive onto the current system and put a new OS on that, or find another computer to transfer the lost hard drive to. This Scenario can be very difficult to deal.

If you burn DBAN to CD-R and see just one file when you open the CD-R afterwards, then you have burned DBAN incorrectly. DBAN may not boot if you modify the ISO file or filesystem layout in any way, like by injecting files.

Yes, provided that you own the Sound Ideas products that you want to transfer. If you are setting up a multi-user audio production environment, you need a license from Sound Ideas. Our Hard Disk Information Sheet has been designed to provide full details about this license. If you decide to sell your hard drive at a later date, however, ALL Sound Ideas audio files MUST be removed from the disc before you transfer ownership.

It's actually very simple. I originally wrote the code as part of a real-time os. That os had disk drivers that worked with dma and were multitasking. So, I took advantage of it and only did all my reads and writes out of the disk buffers. The next sector was always set for read-ahead so that while I was reading or writing the current sector, the next one was filling the buffer. For the bios drivers, I need to specifically fetch each sector and wait until it finishes.

First, create a folder on the hard drive e.g. “D:\Data\Top50”, then copy the entire content of the CD. If you have not yet installed the program, start Setup from the CD and follow the instructions there. The Geogrid Logo appears and a message is displayed alerting you to the fact that the map drive was not found. Now open the item “Directories” in the “Settings” menu and add the new pathway (e.g. D:\Daten\Top50).

No problem. Live View will automatically detect this and build a Master Boot Record for your partition allowing it to boot. Yes, simply select all of the chunks in the browse dialog by using Ctrl + Click. Live View sorts the chunks by their file extensions so be sure that the chunks have either numerically or alphabetically ordered file extensions. Yes, there is full support for the primary operating system on the machine and partial support for the secondary operating system.

Most laptops now use lithium ion (LiIon) batteries. LiIons should be managed differently from the NiCad or NiMH batteries used in older laptops. In particular, LiIons should not be run all the way down to prevent "memory effect". First, they don't have a memory effect, and second, running them down tends to reduce their capacity. If the laptop does not need the battery it should be run to about 40% charge and stored in a cool place.

You need to prepare a driver floppy disk and then following the installation instructions for your Linux or Windows operating system. The latest drivers and Escalade User Guide are available for download from www.3ware.com. Complete instructions for making a bootable array are in the 3ware user's guide, downloadable from the 3ware web site at http://www.3ware.com/support/userdocs.asp. Grub for Red Hat 8.0 does not support arrays larger than 1.7 TB.

It is possible to use an AcomData External Hard Drive as a boot volume on Mac OS 9 and Mac OS X. Follow the instructions in your Mac OS manual for the proper installation of the Mac OS. If you wish to use your AcomData Drive as a boot volume, make sure you install the Mac OS on the Drive before saving any data to the Drive. On Windows operating systems it is not possible to use an external hard drive as a boot volume.

The goal of the FreeDOS Project is to create a free implementation of MS-DOS. DOS is a popular system, and there is plenty of hardware out there that supports DOS. The FreeDOS Project was founded in 1994 by Jim Hall. FreeDOS is not a derivation of MS-DOS - we are not using or referring to any Microsoft code. We are instead using the description of the MS-DOS program as given in publications (such as the user manual) to create a program of our own that follows that spec.

Click-and-hold with the mouse over the image, you should get a pop-up menu with "Save Image As..." as an option. If your image appeared in a separate window, the program that opened it should have a save item in its menu. Simulator images should be renamed since they're automated output from a script.

Although Kaleidescape uses high quality hard disk drives, drives do fail occasionally. On average, drives in Kaleidescape Systems fail at a rate of one or two percent per year. To prevent loss of information from a drive failure, every Kaleidescape Server uses RAID-K to store redundant information. The 3U Server also features a Hot Spare Disk Cartridge as an additional measure of data protection.

When a hard disk drive fails in a Kaleidescape System, you will still be able to enjoy all the Movies and Music in your library, but the System will not be able to import CDs or DVDs. Your Kaleidescape System will also be vulnerable to losing data from a second disk drive failure, until the first failed disk drive has been replaced and the data on it rebuilt. If you suspect that a disk drive has failed, then always call Kaleidescape Technical Support first.

Macrovision is a copy protection technology that applies to the analog video outputs of DVD players. Kaleidescape has a Macrovision license and our products have been tested and approved by Macrovision Corporation. That license and certification enable Kaleidescape to apply the Macrovision copy protection technology to a Movie Player's analog video outputs. This has nothing to do with making a digital copy of the information on a DVD disc.

I have a VMware virtual machine that's using a flat disk image. I'd love to convert it to a QEMU flat image.

You can boot a decent System 5.0.4 or very modest System 6.0.1 from a 3.5" diskette. With two 3.5" drives, you can boot a decent System 6.0.1; but, disk swapping becomes a significant hassle when you want to run most A much better solution is available if you have a 4MB mem expansion card installed. (Actually, you can make do with about 2.5MB of RAM.) You can use a utility named "Flash Boot" by Jerry Kindall. Flash Boot auto-loads System from one or more 3.

quot;In order for the Finder to recognize a hard disk, the hard disk must be switched on and up to speed before you start up (or restart) the computer. Switch on the hard disk, wait about 10 seconds for it to come up to speed, and then restart the computer." quot;IMPORTANT: Always turn on any external SCSI devices connected to your Macintosh before turning on the computer itself. Otherwise, your computer cannot recognize the SCSI devices."

No, RADIUS was designed for individual PC use and certain configuration files will not work if the program is stored anywhere but the C: drive.

The following instructions have been tested in KDE. They should also work for Gnome as well, to the extent that it uses HAL in the same way as KDE! To allow harddrive partitions to appear in the KDE media:/ ioslave, one simply needs to remove a file installed by the hal package: # rm -f chroot/usr/share/hal/fdi/policy/10osvendor/debian-storage-policy-fixed-drives.fdi The ability to mount NTFS read-write using media:/ _almost_ works.

Run the Task Manager, go to the Processes tab, and turn on the following columns: "I/O Read Bytes" and "I/O Write Bytes." This will give you details as to which process is accessing the disk. Although many processes will be accessing the disk a lot, look for one with a high total or a fast rate of increase, especially when you hear/see the drive LED being accessed.

Kaleidescape recommends that all Disk Cartridges should be left in the Server until the replacement Disk Cartridge has arrived. Please do not remove a Disk Cartridge unless instructed to do so by Kaleidescape Technical Support. The Server chassis will cool properly only when all its slots are filled with a Disk Cartridge (blank or containing a hard disk drive).

Should this occur, we would provide a new license, no questions asked. Our clients will always receive the benefit of the doubt. Hard disk failures among CrypKey clients are rare. CrypKey's three-year relationship with Flowel, a popular flow calculation program we market world wide, has resulted in eight reported hard disk crashes, of which we believe only two are suspect. Back to Top

This question does not make sense. You would use an ftp program to move files between various systems on the Internet. How do you access gopher from your home PC? We were told not to use a web browser so I was wonder whether to use hyperterminal in Windows 95 as a modem and type an address such as telnet gopher.umuc.edu.

Because WebLife Disk acts like a hard disk on your computer, Microsoft Windows needs to restart in order to access it.

You need to write a realmode driver. See the realmode environment sources and White Papers ("Solaris Realmode Environment", "Realmode Drivers", and "External BEF Interface Specification for x86 Realmode DDI"). Unless otherwise licensed, code in all technical manuals herein (including articles, FAQs, samples) is provided under this License.