Should I adjust my firewall / router?
Skill City - Casual Games, Serious Rewards - Puzzle games, S...Skill City uses port 80, or port 4000 if you have problems with port 80. Most users will not need to make any adjustments, however some firewalls and home routers may block Skill City from communicating to the internet. We recommend that you consult your firewall manual for directions on allowing these two ports. If your firewall has Stateful Packet Inspection (netgear routers have it enabled by default), also called SPI, then it is recommended you disable that feature.
Related QuestionsI use a firewall or router, what can I do?
Frequently Asked Questions - MorpheusWikiIt has become common for a typical household using broadband to utilize a router or some type of firewall. If you're behind a router or other type of firewall you can still use Morpheus, but you will not be able to download from other firewalled users and connecting can be slower if you are not properly configured.
Related QuestionsCan a cisco router be a ''true'' firewall?
This depends on the definition of firewall. Some writers (e.g., Gene Spafford in _Practical UNIX Security_) define a firewall as a host on which an ''inside'' and/or an ''outside'' application process run, with application-level code linking the two. For example, a firewall might provide FTP access to the outside world, but it would not also provide direct FTP service to the inside world.
Related QuestionsWhat ports do I need to ensure are open on my router/firewall?
FAQIf you have questions regarding the compatibility of your router with your new VoIP service you should contact the router manufacturer directly. Some of the most common manufacturers' tech support numbers and web sites are listed below. If you do not see your router manufacturer's information listed above, please refer to their website for further information. Most likely the VoIP device you received is not registered with PhoneOverNet.
Related QuestionsI use a firewall or router, can I still use Morpheus?
Frequently Asked Questions - MorpheusWikiMorpheus will work through your hardware and software firewalls, although it varies from firewall to firewall set up. If you are using a software firewall such as McAfee or Zone Alarm be sure Morpheus has access to connect to the internet and act as a server. If you use a router (common for DSL and cable connections) and want to increase your download and connect success, it's highly recommended you forward the port Morpheus is using to your local computer.
Related QuestionsI am behind a router or firewall and can't connect. What can I do?
MorpheusTo increase your download and connect success, as well as get the most out of Morpheus when behind a firewall please Click Here for directions and info.
Related QuestionsHow do I run a server behind a router/firewall?
Haxial FAQ: KDXYes, it is okay if KDX Server starts on the internal/private address, this is normal operation. You need to configure your router to map port 10700 to that internal/private address.
Related QuestionsWhy do you need to configure your router or your firewall?
GigaTribe : peer to peer (p2p) between friendsWhen you connect to the internet, you usually use software (web browser, email manager, etc...) that requests information from other servers (to download the contents of a web page, to get the list of messages in your mailbox, etc...). In the case of GigaTribe, your PC becomes the server that answers incoming requests from the members of your network.
Related QuestionsCan the Router be accessed through a firewall?
APPX Router - Frequently Asked QuestionsYes, if the firewall and the Router are configured properly. The client application is configured to access the Router using a) its destination host name and, b) the Listener port. The firewall must accept traffic to the Router from the client machine, and must also permit traffic to the client machine from the Router. If such traffic is restricted by the firewall, either the firewall or the Router must be reconfigured as necessary.
Related QuestionsHow do I install DMS behind a firewall or router?
Keene - FAQsThe quick answer is that Digital Media Server works great behind a firewall. However, there are some configuration changes you must make in the firewall in order for computers outside the firewall (or your home or office) to "see" the computer running Digital Media Server. For a complete discussion on using Digital Media Server on a computer behind a firewall, click here.
Related QuestionsI am using a router. How do I get through my firewall?
TrackerPod / PowerPod - TrackerCam [ HostYou (Belgi? / Belgi...If you have a router like Linksys, Bay Networks, SMC, etc., you need to find out how to redirect port 8090 (or the port number you selected) to the computer with the TrackerCam. iNetCam has some information on how to do this. Use port 8090 instead of port 80. Once you set that up, start TrackerCam software, click the bottom-left arrow to open the Tool Panel. Then press the top-right button in the Tool Panel to get online. Click the IP number drop-down list.
Related QuestionsIs a firewall router provided at installation?
Etheric Networks FAQs PageWe can provide a router recommendation. We require support of standard auto negotiating Fast Ethernet connection.v Please see our hardware recommendations page. Please be EXTREMELY CAREFUL NOT TO USE THE WRT54G V 5.0 - 4.0 or WRT54GL are both fine.
Related QuestionsHow do I config ZoneEdit with my firewall/router?
Dynamic Ip Address Serving (ZoneEdit.com)Dynamic DNS software can detect this, and/or have a special option of "getting the current IP from a web page". This URL returns your machines current IP: http://dynamic.zoneedit.com/checkip.html You can use it in your dynamic DNS software config. Some routers purportedly have builtin support, and others can be modified to support it. This is preferable, since it doesn't require "polling".
Related Questionsedit] How do i configure my firewall / router?
HFS Frequently Asked Questions (English) - rejetto wikiThere is no general method that works for all firewall / router combinations. Check http://www.portforward.com/ for information, and also try "port forwarding" in Google. Some methods are listed below, but we need help with this section. (The best way to help is to contribute to the forum http://www.rejetto.com/forum/index.php?board=27.0) First, navigate to Network Connections. (Or open it in Control Panel.
Related QuestionsCan I connect through a Proxy, Router or Firewall?
iVisit FAQ, Frequently Asked QuestionsThe latest versions of iVisit will work with many NAT/proxy/Firewall devices. Unfortunately, there are dozens of such devices, and each one seems to operate a little bit differently. Some will support iVisit out of the box; others may require special configuration; others may not work regardless of what you do. Others may only work partially, e.g.
Related QuestionsHow can I play online if I use a firewall or router?
Blitzkrieg - CDV Software Entertainment AGIf you have problems connecting to Internet games when you try to play from behind a router/firewall, you have to open the following ports: Blitzkrieg Ports 8889 and 9089 Gamespy Ports 6667 (IRC) 80 (HTTP) 3783 (Voice Chat Port) 27900 (Master Server UDP Heartbeat) 28900 (Master Server List Request) 29900 (GP Connection Manager) 29901 (GP Search Manager) 13139 (Custom UDP Pings) 6500 (incoming, pre-configured port can be changed in the file "svc.cfg" in the command line "roomqueryport=
Related QuestionsWill the Ethernet router provide a Firewall against hackers?
PlusNet - Broadband ADSL and Unmetered Internet Service Prov...No, the BT Ethernet router/hub does not provide any Firewall capability. We advise that you purchase at the very least a good software Firewall and anti-virus program and practice standard network security precautions such as disabling File and Printer sharing in Windows. For networks it is a sensible idea that you invest in a NAT capable router/firewall (hardware) system.
Related QuestionsWhy do I need a router with firewall and PPPoE support?
KWISP Frequenty Asked QuestionsIf you have multiple computers, a router with NAT firewall is required to share the public IP address and protect against hackers. We use PPPoE to assign IP addresses and implement speed tiers. If you only need to connect one computer, you can connect directly to our equipment if the computer has Windows XP and an Ethernet interface. Windows XP includes a PPPoE client and a firewall. Otherwise, a device typically called a "cable/DSL router" will be required.
Related QuestionsWhat should I do if I am using a proxy server, a router or a firewall?
Blue Byte Game Channel - The Settlers 4You should make sure that the ports 3105, 8000, 8001, 9007, 9008, 9009, 10000, 10001, 10002 are open.
Related QuestionsCan I use an linux xbox as a router/firewall?
Talk:FAQ - Xbox-LinuxThe biggest issue you'll have is "does this USB-Ethernet device work under Linux?" Go here (http://www.linux-usb.org/devices.html#net) and look at their list: obviously, listed devices as "working" and "main kernel source" are the most likely to work. Oh, and one disadvantage to using USB: since the XBox is limited to USB 1.1, you won't get anywhere near the speed of a 100Mbps Ethernet network or even a 10Mbps network.
Related QuestionsDoes the gateProtect firewall have a router function built in or do I have to use a separate router?
gateProtect Firewall ServerYou do not need an extra router, because the firewall has got a built in router function. This will make an additional router unnecessary.
Related QuestionsCan I adjust myself?
Natural Life Centers | FAQ: Ask the DoctorNo. Since a chiropractic adjustment is a specific force, applied in a specific direction to a specific joint, it is virtually impossible to adjust oneself correctly and accurately. It is possible to turn or bend or twist in certain ways to create a "popping" sound that sometimes accompanies a chiropractic adjustment. Unfortunately, this type of joint manipulation is usually counterproductive, often making an already unstable spine even more unstable, and can sometimes be dangerous.
Related QuestionsFrequently Asked Questions About Chiropractic - Family Chiro...Absolutely not. Chiropractic is both an art and a science, and training takes many years to complete. Adjustments are applied to specific segments of the spine with a specific amount of force and in a specific direction. For someone inexperienced to attempt any spinal manipulation, to themselves or others, can create significant additional problems.Related Questions
Chiropractic FactsNo. Since a chiropractic adjustment is a specific force, applied in a specific direction to a specific joint, it is virtually impossible to adjust oneself correctly and accurately. It is possible to turn or bend or twist in certain ways to create a "popping" sound that sometimes accompanies a chiropractic adjustment. But a "crack" is not an adjustment.Related Questions
My Router already is a hardware firewall—why do I need a software firewall?
Zone LabsSoftware firewalls are an essential computer security component, even if your computer is connected to a router. While routers (sometimes called hardware firewalls) protect computers from incoming hackers, they do not protect against the multi-layered attacks often used by cybercriminals. Software firewalls protect computers at all layers.
Related QuestionsCan I disable McAfee Personal Firewall Plus if I have a firewall on my router?
My McAfeeIf you have a conventional Router, you can disable Personal Firewall and ignore the Firewall protection is disabled warning in SecurityCenter. However, Personal Firewall goes far beyond the basic protection offered by conventional home Routers, so disabling Personal Firewall will result in decreased security for your computers. Consequently, McAfee does not recommend disabling Personal Firewall.
Related Questions