The notebook drives are quite good value at ~$100 USD for 40-80GB. I've used a second-hand laptop drive salvaged from a "damaged" laptop I bought on ebay for ~$25 USD.

SHH Systeme makes several IDE controller cards for the Apple II family; they claim to be as fast to faster than the RamFAST card.See http://users.ids.net/~kerwood/shh.html, or contact jlange@tasha.muc.de for details like technical specs, pricing, and S/H procedure. Their Microdrive card supported only 256MB of capacity per drive, and 2 drives per card. The MicroDrive/Turbo supports 2GB per drive and 2 drives per card.

Set HD="/dev/hdX /dev/hdY" in /etc/laptop-mode/laptop-mode.conf, where /dev/hdX and /dev/hdY are the device names that you want laptop mode to affect. This doesn't quite work though: the kernel switch (which delays all writes) doesn't discriminate between drives. You can also limit which partitions are affected by the remounting, using the PARTITIONS configuration setting, but again, this doesn't fully disable laptop mode for the other partitions.

There's a card called Turbo IDE, does DMA, is as fast as a RamFAST SCSI card. Contact J.LANGE7@genie.geis.com for details like technical specs, pricing, and S/H procedure.

The following links will guide you to more information about hard drives and the data recovery process. We will work with you in a timely manner and are qualified and ready to help you recover your data. Let our experts and our 20 years of experience work to help you ensure your data is never lost!

i own a dell dimension 8100 model for my lap top :) i like it cause its black and pretty nice. it runs well and is a great lap top . dell is pretty good if you're looking for a nice computer. also if you want it in black too.. with a nice look.. lava, fwiw, with the dells internal harddrive i can run more than 60 tracks without the slightest hiccup at 12 ms latency.

Yes. Logicube sells 2.5" drive adapters, and can provide adapters to many of the special drive connections on the market. Please call for availability. Or, in cases where the drive cannot be removed from the laptop, you can use the parallel port connection or the CloneCard? for coping through the PCMCIA interface.

Laptop batteries are often manufactured in very large volume production runs and as a result cannot be all sold immediately and end up as surplus or old stock. Lithium-ion batteries particularly need to be charged periodically and so a battery may have gone through many charge cy...

These notes are particular to laptops; the issue of file recover or transfer is otherwise covered in a number of FAQ questions in section 2.0, so read the adjacent responses. First, determine whether your drive is SCSI, or ATA (or IDE, same thing). A SCSI laptop hard drive has 50 pins, or possibly 54 pins (four for power); an IDE laptop hard drive has 40 or more likely 44 pins. IF the drive is IDE, you can't connect it as a SCSI drive and vice versa. Apple does not support external IDE drives.

Generated in 0.03 seconds in which 0 seconds were spent on a total of 5 queries. Zlib compression disabled. When purchasing any product from Leerburg Enterprises, Inc. it is understood that any and all products sold by Leerburg Enterprises, Inc. are sold in Dunn County Wisconsin, USA. Any and all legal action taken against Leerburg Enterprises, Inc. concerning the purchase or use of these products must take place in Dunn County, Wisconsin.

No, all hardware components of our rented servers are property of Crucial Paradigm. If you wish to have an upgrade you will rent the hardware from Crucial Paradigm and we will install it.

Our company is dedicated to data recovery from different hard drives, but we do not undertake repair only. Our work entails recovering data and supplying it on a suitable replacement medium (CD-ROM or new hard drive) so that the client may access the lost data once more. The original hard drive is returned but we do not recommend that it is used again.

A hard disk drive consists of a mechanical part (HDA) head-and-disk assembly and a (PCB) - printed circuit board. HDA acts as a case for all mechanical parts of a drive and contains one more chip performing the functions of a preamplifier/commutator. The PCB consists of series of chips which control the mechanical parts, encode/decode data on the platters/magnetic surfaces, then transfer the data through an external interface. Generally, PCBs are located outside HDA, in its lower part.

The client is responsible for removal of all company data prior to return of an asset to IBM. However, we do offer an optional disk sanitization and cleansing service that overwrites their data. Hard-file data is cleansed via a 3x overwrite process so that data is virtually irretrievable. This option meets Department of Defense 5220-22-m 3-pass standards. All nonfunctional or non-marketable hard drives are "hammer destroyed".

No worries. You do not have to worry about the removal of company data prior to return of an asset to Retire-IT. Our process adheres to the Department of Defense standards. We overwrite every working hard drive so that data is virtually impossible to recover. If a hard drive is inoperable, or the overwrite procedure cannot be verified, Retire-IT physically destroys the hard drive to ensure data is secure.

For Model AB64: please consult the AB64 User Manual to calculate your size requirements and installation instructions. For the model AB64 we currently recommend the Samsung SpinPoint models PL40 SP0411N (40 GB), P80 SP0612N (60GB), P80 SP0802N (80 GB), P80 SP0812N (80GB), P80 SP1203N (120GB), P80 SP1213N (120GB), P80 SP1604N (160GB) and P80 SP1614N (160GB). These drives are extremely quiet, have a very good warranty and include mounting hardware.

Yes, but only within Canada, due to warranty considerations. Because of the volatility of the market, contact us for current pricing.

DV has a data rate of 3.6 MB/sec. This means that in order to capture DV onto a hard drive in real-time the hard drive must be able to sustain at least 6 to 9 MB/s minimum. Note that peak data rate such as the 160 or 320 MB/s you hear about has nothing to do with sustained data rate. Our systems have lead the way for both data rate and size. We have introduced many industry firsts in the storage area. Even our low-end systems today have drives that will sustain over 20 MB/s.

Like most this these days hard drives have a MTBF (Mean Time Between Failures). Due to a hard drive architecture it will eventually, it’s just a matter of time. Most cases of media failures are either due to physical failure of the media or due to human error.

Simply put this is to your advantage for both cost and flexibility. Disk recorders with built in Hard drives require the entire unit be used together. With the DR-DV5000 the drive is removed from the core unit and connected to the computer for the editor to use. Another drive can be inserted into the DR-DV5000 so the videographers can continue to shoot. You can also choose the size of drive that suits your needs. There will be 20-40-60- & 80 gig drives available.

We never recommend anything other than a single disk install or multiple disks of the same type. Anything else and you are following an unrecommended setup and you will need to navigate for yourself. Repeat, we never recommend anything other than a single disk install or multiple disks of the same type. If you're thinking of doing anything else (setup your own partitions), read this section again.

If you do not see your hard drive in this list please contact us, (617) 491-1001, we may still be able to help!

Yes, Heatsoft Clone Cleaner supports the ability to scan multiple hard drives, including external drives like JAZ or USB. You can add several paths or drives to the Current search set.

However, Adam Secombe provided the following story/answer when looking through auction houses or used computer markets (check your newspaper): Keep this in mind when hunting for your notebook for our purposes, a notebook for wireless routing does not require a working keyboard or screen. During setup both of these items can be plugged in externally and removed once the machine is setup.

Focus Enhancements learned in mid 2005 that many newly manufactured drives were not compatible with the FS-1: they either could not be formatted by the FS-1, or if they did format, they did not correctly record video and audio from the FS-1. We tested four new drive enclosures from Wiebetech. Weibetech is a manufacturer whose drives we have OEMed for FS-3 disk enclosures, and for FS-2 enclosures as well.

The receiver mid-planes are rated to 500 insertion cycles, where an insertion cycle is the combination of installing and removing the Quick-Time Hard drive carrier. The carriers are rated to 2000 insertion cycles, where an insertion cycle is the combination of installing and removing the Quick-Time Hard hard drive carrier from the system receiver.

There were a few models of internal HDs made for Apple IIs over the years. Applied Engineering's Vulcan and Applied Ingenuity's InnerDrive were both power supply replacements that had the HD in the power supply and a cable running off to a card in one of the slots. These tended to fail a lot; to low-level format an AE Vulcan drive, go into PART.MANAGER, move the highlight to "format" and type "AE". Then say yes to all the prompts.

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is implemented into all of the modern hard disks. A special program inside the disk constantly keeps tracking the condition of a range of the vital parameters: driver, disk heads, surface state, electronics, etc. At the present time, S.M.A.R.T. technology is able to predict up to 70% of all hard disk problems! However, to use this information, you firstly have to retrieve it from the disk and to analyze it.

No. Mirrored hardware only protects you from a hardware failure. Since 90% of data loss is due to data corruption or user error, mirrored equipment offers no protection. This is because corrupt data is instantly written to the mirror equipment. The only way to protect your data is by having a backlog of backups to restore from.