If you are using version 1.0 of MagicEngine you can directly change the CD-ROM drive from the GUI, in the 'boot cd' menu, but if you are using an older version you will need to change the 'drive' option in the pce.ini file (0 = first CD-ROM drive, 1 = second, etc...), or if your PC is running Windows 2000 or XP you can also change the 'drive_letter' option, simply set it to the letter of your CD-ROM drive (D:, E:, etc...).

In version 2000 from PhysTechSoft exists a built-in cd-rom driver. In former versions you can use MSCDEX.EXE or NWCDEX.EXE from MS-DOS/PC-DOS or DR-DOS if the drive doesn't work correctly with the PhysTechSoft files. First answer:) Start PTS-DOS with a CONFIG.PTS and an AUTOPTS.BAT containing only the most neccesary lines and the keyboard driver for installing Windows (minmal configuration). After the Windows installation, choose the "Windows compatible" option at startup.

The audio presentation portion of our demo is presented as CD Audio. If you have a CD Player option for your computer, you will be able to hear the demo at your computer. Otherwise, any CD player will play the audio tracks of our demo CD.

If your system has more than one CD Rom drive, Evolution selects the first CD Rom drive found. The actual drive selected will depend on your hardware configuration. For example, if you have two CD Rom drives on one IDE controller, Evolution will rip from the drive configured as the Master.

A workaround for those who must have 2 CD-ROMs visible at the same time is to use vvfat. Mount one of the CD-ROMs, and pass it as a hard disk via -hdd fat:/mnt-point. These will look like hard disks to the guest OS, and thus are not removable.

If you are accessing a CD-ROM on a network using Novell Netware, you need to add the following line to your NET.CFG file: Failure to do so will keep EXTRACT from reading files on the networked CD-ROM, yeilding error messages like

Not at the moment. I make changes to this site more or less every day so a static copy would become out of date very quickly. I think the web is the best place for a site of this kind.

You have to press the Del button to go in the BIOS and then go to BIOS FEATURES SETUP to adjust the Boot sequence to SCSI, and also you have to go into SCSI BIOS to adjust the CD-ROM Boot function to "Enable" mode. - Go to Top

CD-ROMs are compact discs, read-only, removable storage media. CD-ROMs read the data encoded on the disc and then transfer this data to the computer. CD-ROMs are different from hard drives and floppy disks, in that you cannot store your own information on them. Recently, gurus created the RW CD-ROM drive: re-writeable CD-ROM drive. It allows you to read, erase, and use it repeatedly like a floppy drive.

should work. If it does not, you must edit your /etc/fstab file and add a line that refers to your CD-ROM device. In more recent versions of Red Hat Linux, your CD-ROM is more likely to be something like /dev/cdrom. To find out what the CD-ROM device is for your system, type

You can make encrypted volumes of any size as the case may be. These volumes behave like any windows folder and can be moved/copied from anywhere to anywhere (including CD, another HDD, portable HDD etc..) You can copy Cryptainer volumes directly on the CD/CDRW/Floppies,USB Drives etc. No. You have one of two methods to be able to do so. You can make a self-extracting encrypted file and mail it to your associate. All he or she has to do to access the data is enter the password.

When you install a CD image of Untangle Server onto an existing computer, as outlined in Untangle Server Quick Start Guide, you need to boot from that computer's CD-ROM drive. If this is your first time booting off a CD, no problem. Do the following, but read ALL the steps before you perform the following procedure because booting off a CD requires precise timing: Turn on the computer again, and wait a few seconds before you see a screen that says BIOS.

If you don't have a CD-ROM drive to install our software, you may request a simplified version of our installation kit on 3.5" diskettes. This version includes an alternate browser compatible with your specific operating system. Simply call Member Services at 1-800-921-9328 to request this software. If you already have Internet access, you can download Atlantic.Net's Edition 5.0 Internet Connection Kit. Click here to get started.

If you are using the Air2Data Wired solution, and you have an existing Network Adapter, you can configure it by following the instructions under Troubleshooting Guide below. If you are using the Air2Data Wireless solution and you have an existing 802.11b wireless adapter, or you are using Windows 2000/XP, follow the instructions under Troubleshooting Guide below to connect. Otherwise call our Technical Support staff for additional help.

Yes! You can replace the internal CD-ROM drive with another IDE device, including multifunction devices like CD-RWs, or combined DVD/CD-ROM drives. When you replace the internal CD-ROM with some other device you hope it will extend the CD-ROM functionality. With CD-RW this doesn't happen - you loose an option to perform a boot from a bootable CD-ROM media. I checked Plextor, HP, Teac CD-RWs and no one was able to boot..

These instructions are intended for users who do not have a built-in floppy drive in the machine being used to run the LANforge bootable CD-ROM. The USB floppy drive should already have a disk in it with a license.txt file that you obtained from sales@candelatech.com. Insert the Universal Host Controller Interface Host Controller Driver kernel module: insmod /lib/modules/2.6.18.2/kernel/drivers/usb/host/uhci-hcd.ko Copy the license.

That's fairly easy: You simply need to add a line to your CONFIG.SYS file, for example: DEVICE=C:\CDROM\IDE_CD.SYS /D:CD0001 Please change C:\CDROM\IDE_CD.SYS to your cd driver for DOS. You can get the driver with the drive on a diskette or try to use a different one from www.simtel.net. The example shown above is for MS DOS, for FreeDOS it would be FDEX /D:CD0001 and for DR DOS it would be NWCDEX /D:CD001). Look also at What is conventional memory? (2.

You can replace the CD-ROM/DVD-ROM drive with CD-RW drive in only a few minutes. However, if you want to upgrade the CD-ROM/DVD-ROM to a CD-RW drive, you will need to purchase and install the CD-RW drive yourself. In later releases, the Eureka MD will include a CD-RW drive as one of your purchasing options. It is not recommended that you replace the drive yourself, as it may be difficult to find a replacement drive with the same type of faceplate.

The Auto Run feature on your computer may be disabled. You can turn it on by right-clicking over the icon of the CD-Rom drive that you inserted the disk into. Then look through the tabs for and unchecked box that says "Auto insert notification." Check the box and click OK. Then restart.

DVD-ROM drives, being backward compatible with CD-ROM, protect your investment in those discs while opening up the exciting world of DVD to your PC.

Yes, you can make a copy for back-up purposes. The copy can also be given to other radiologists, and they will be able to run and evaluate it for 15 days. After that time, the software will become non-operational, and they must contact us to purchase a CD-ROM license for any further use of the software.

No. Tales from the Punchbowl uses the new Mixed Mode Type 2 formatting technology and is compatible with most existing CD ROM drives and drivers. No upgrade is necessary.

Login to "My Blackboard," > Tools (left side of screen) > Personal Information > Set CD-Rom Drive >Submit Login to "My Blackboard," > Login to specific course > Tools > Personal Information > Set CD-ROM Drive > Submit.

Computer Doctor: Depending on what type of drive you have, the laser lens may be difficult to access. As a first step, try a cleaning CD sold in music departments. A cleaning CD has a series of soft brushes on the data side which can sweep away dust from the lens. If this doesn't work, you'll need to remove the drive from the system, then manually open the tray. The lens (optical pickup) mechanism should be visible. The lens is made of clear plastic and should be cleaned very gently.

RealJukebox does not recognize all CD-ROM drives. RealNetworks has made a patch to fix this issue. To install the patch, do the following: RealJukebox will search the RealNetworks AutoUpdate server, download the patch, authenticate information, and then install the patch. Once the update is complete, restart RealJukebox. If you continue to experience problems with your CD-ROM drive not being recognized by RealJukebox, please send e-mail to technical support.

In order to avoid the change of a CD-ROM drive, the parameter ?s <number of the drive> can be used to skip ad drive. To do so check the output of LOCKCDR. Check which drive do you like to use as CD-ROM. Check the number of the drive (the first drive is 0, the second listed drive 1...). Now change CONFIG.SYS. Locate BASEDEV=LOCKCDR.FLT and include ?s <drive number> for each drive LOCKCDR should ignore, i.e. LOCKCDR should leave as CD-ROM or DVD.

Only MULTIREAD CD-ROM and DVD-ROM drives can read CD-RW media. Standard CD-ROM and DVD-ROM drives cannot read the low-reflectance media used in CD-RW discs.

There are several advantages to using a CDROM based system in various security related environments. The main system is centered around the ramdisk; a compressed file system image which is loaded at boot time. Any changes to the ramdisk image are temporary, and will be undone upon the next reboot. Furthermore the ramdisk, kernel, binaries, etc, related to the operating system are kept on read-only media(CDROM).