If your TV set is HDCP enabled, you can connect your HDMI device to your DVI TV set by using a HDMI to DVI adapter. It is a small device that you can find in any Hi-fi or TV store. However, remember that sound will not be transported. You will need to use the audio output of your device and the audio input of your TV set. You can connect them together if you use a DVI to HDMI adapter. Please contact your Hi-fi or TV store for more information.

Yes. You can use an HDMI to DVI cable or a HDMI to DVI Adapter. However it may or may not work. Why? HDCP. HDCP stands "High-bandwidth Digital Content Protection" (HDCP). It is meant to prevent you from copying content you are not "allowed" to copy. Generally HDMI connectors all use HDCP. DVI connections on the other hand, may or may not have HDCP. Computers and LCD monitors for example, can have DVI connections which do not have, or "need"; HDCP.

There are two reasons. First, a 720p output signal contains much more data than a 480p signal, resulting in a greater potential for signal degradation and loss. Secondly, all video monitors using DLP, D-ILA, LCD and LCoS technology employ built-in "480p to 720p" scaler circuits. While 720p is higher resolution than 480p, the upconversion process should be done in the display device or by a professional-grade outboard scaler rather than inside the source component.

You can connect DVI to HDMI, providing the DVI is the Digital variety - ie: DVI-D. The signal is 100% compatible with no loss of quality. You can use either DVI-HDMI adapters, or a cable which is terminated with DVI-D at one end and HDMI at the other. Of course the extra features of HDMI will be forfeited (digital audio and communications bus), but otherwise it's fine. You cannot connect DVI-I to HDMI, as HDMI is digital only.

You should connect the DVD players audio/video outputs to the audio/video inputs on your TV. To see the video signal, coming in from the DVD player, you need to switch off of your TV tuner and select the video input jacks. It is usually a TV/Video or Input button on your TV remote. If you connect a DVD player through a VCR the DVD movies copy guard feature is going to be activated and the color is going to blink from light to dark.

When determining the best connection method for setting up the home entertainment equipment, it's important to consider the specific type of audio/vid...

Yes, but you'll need a HDMI to DVI cable or adapter. You may be able to blag one off the installer - tea and biccies go down well. You'll also need separate audio cables because DVI only carries video. And if your TV doesn't support HDCP (check the TV manual) you'll be limited in what you can watch - most of the HD movies require HDCP. No, when you enable one the others get disabled - that's because the hardware isn't very good at doing both HD and SD at the same time.

For video, use the component video output of your DVD-Video player and set your DVD-Video player output to progressive scan, if you have a progressive scan DVD-Video player. The selection can be made either by a button on the back panel of the DVD-Video player or via DVD-Video player's menu selection, depending on the your particular model. If your DVD-Video player does not have component video output, then use the S-Video connection.

To use TVGuardian with multiple devices without having to disconnect one to use the other, you will need to purchase an Audio/Video Switch Box. The allow you to switch between multiple sources (DVD Player, VCR, etc.) by pushing a button. An Audio/Video Switch Box can be found at Radio Shack and other electronics stores. TVGuardian works with virtually all TV shows, DVDs (see DVD info below) and videos, including videos you have recorded of qualified TV shows or movies (not home movies).

You can connect AGNPRO monitors equipped with video inputs: S-Video, Composite Video, and/or component video to various devices such as a TV tuner, DVD player, or other video input source. Some model are equipped a Y - adapter for Composite Video and S-Video input, e.g. S-15V, M-15V, S-17, S-18, S-19, X-174, X-150, X-215, F-315, F-317. Yes. Models equipped with video-in feature (S-video, RCA jack (CVBS) or Component video adapters) will support both NTSC and PAL and other major video standards.

Since an HDMI cable combines video and audio signals, we strongly feel that it offers a connection of inferior quality. Furthermore, DVI to HDMI adapters are readily available.

Most DVD players include a number of outputs for a dedicated signals. These include S/Video, RGB and Composite. None of these can be directly connected to an RF socket, because they contain a completely different type of signal. It is possible to connect a DVD player up to a television without a dedicated socket, but don't expect to see the stunning picture quality that would be available through the normal route.

No, Macrovision will kick-in and render the picture unwatchable. That is unless you defeat Macrovision.

It's generally not a good idea to route the video from your DVD player through your VCR. Most movies use Macrovision protection, which will cause problems such as a repeated darkening and lightening of the picture. See 1.11 and the Video RF section of 3.2 and for more info.

Do you have Images of Vehicles? Yes - just click on the below links to view full specifications and images:

No. No TV, no movies, no phone. You can always bring a portable movie player if you want movies. We have young kids and we bring a small-screen portable DVD player so they can watch movies. The kitchen has a thatched palm (palapa) roof and two walls, but it’s open on the two sides facing the ocean. This means the view from where you cook and eat is spectacular. It also means you need to clean up after each meal or you will be visited by ants and desert mice.

Yes the house has a satellite tv. Please note we sometimes experience satellite communications problems but these are generally sorted out either shortly, or within a day or so. There is also a dvd player. Back to Top

HDMI, which stands for "High-Definition Multimedia Interface", is the consumer electronic industry's first connection capable of transmitting uncompressed digital audio/video signals. Components featuring HDMI can transmit both digital audio and video over one convenient cable, replacing the tangled mess that resides behind many home theater components. HDMI also offers improved quality over traditional analog connections thanks to all-digital transmission.

HDMI stands for "High Definition Multimedia Interface". It is the latest standard which integrates the same digital video bitstream as DVI-D (Single Link) with up to eight channels of high-res digital audio. What's more, it is a two-way communicating bus, allowing a source and display device to "talk" to each other.

DVI is Digital Visual Interface. This is an old standard for digital video input used initially for PC screen connections but also suitable for HDTV. PC owners may be familiar with the DVI cables used to connect their monitor. HDMI is the High Definition Multimedia Interface. It was introduced more recently with Digital TV in mind and has been called the SCART socket of HDTV. Unlike DVI it includes audio content as well as video. HDCP stands for High-bandwidth Digital-Content Protection.

DVD is a format that will provide significant picture quality advantages when connected to your television set via the S-Video connectors.

There are a couple different ways to do it. The connection can be made using our portable DVD player cable that came with your unit, if the DVD player has the appropriate jacks. Typically, they will be labeled with a picture of headphones for audio, and the letters AV for video.

PS3 supports most displays via the AV multi output. Visual quality through AV multi output is comparable to that through HDMI.

Well... sometimes. Only the digital part of the signal will be relevant if they are connected, as the DVI-D connection cannot read the analogue signal which may be contained in the DVI-I.

Answer: To connect RSQ karaoke player to TV for graphics, TV needs to have video input with RCA plug. If your TV doesn't have RCA video input, you need to get RF MODULATOR. You can connect the karaoke player to RF modulator with RCA cable and connect RF modulator to TV with anntena cable.

Leaving the dvd in the drive Stop the movie playing Press "SELECT" to enter the menu Enter the "SETUP" section Press "X" over the "TV TYPE", this will display a new menu Select new type.

We have not placed these items in the caravans as we realise that most people have their own portable items and these will work in the caravan when connected to a 240v Mains Supply or Generator.