Tech Article: Will the MegaSquirt and MegaSquirt-II work with my Stock Ignition System?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...Ford EDIS is a distributorless ignition system that's very easy to adapt to just about any internal combustion piston engine out there-you just need to mount (weld) a 36-1 trigger wheel to your crank pulley and build a bracket for the VR sensor to locate it next to the trigger wheel. That's the hardest part and the only fab work. The rest is a bit of wiring. The EDIS system has an EDIS module and a coil pack. The module is wired to the VR sensor and the MegaSquirt, and also the coil pack.
Related QuestionsWill the MegaSquirt work with my stock ignition system???
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...This is the most important thing to determine when attempting to control both fuel and spark. In an ideal situation, you can take control of your stock ignition system and call it a day. That is most common on distributor based vehicles. If you're willing to do a bit of modification to the MegaSquirt in the way of adding coil drivers it makes this a valid option for many more ignition systems.
Related QuestionsCan I use the stock IAT and CLT sensors with the MegaSquirt?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...Yes you can in almost every case-- the exception is that you sometimes remove your stock IAT sensor as it's a part of the stock MAF or AFM on many cars. If this is the case then you'll need to add another IAT sensor to the intake tube, usually just before the throttle body, and after the intercooler if you have one. The idea is to measure the air temp as it enters the engine.
Related QuestionsI want a MegaSquirt-III but the newest thing I see on your site is the MS-II. What gives?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...There is no such thing as a MegaSquirt-III -- The confusion comes from the circuit board (PCB) versions which is now 3.0 or 3.57. The latest processor is still the MS-II. Hence the latest, greatest hardware available is the MegaSquirt-II, with PCBv3.0 or 3.57. Everything is versioned to help keep track of things, and it gets a little confusing at times... The MS-I firmware is at version 3.0, the MS-II firmware is only at version 2.88.
Related QuestionsI am a type II diabetic. Will this work for me?
Gourdin - Dr. Pushpa Khanna's List of Research Papers and Pu...Ans : Gourdin was formulated as a dietary supplement especially for Type II diabetics. Later it was found to work well for Type I diabetics, as well. Since its launch, the response and feedback has been tremendous and encouraging.
Related QuestionsHow do I add a tech article?
FAQsThe best way to add a Tech Article is to setup a blog, add it as a blog entry, and then add a cross link from the tech articles section. This is a cool setup because people can go to your blog and read about the history of your truck, adventures, and see some of the tech articles you've written as you've learned things --OR-- they can go to the tech articles section and just find tech articles regardless of who wrote them. You only need to write a tech article one time to do this.
Related QuestionsWhat the heck is a MegaSquirt?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...The MegaSquirt line of Engine Management Systems are Do It Yourself (DIY) systems capable of full standalone engine management a a fraction of the cost of the what the 'big dogs' charge. They were designed with education and performance in mind, so that the do it yourselfer could learn the in's and out's of engine management and tuning, while learning a good bit about electronics in the process.
Related QuestionsWhere can I find the MegaSquirt Schematics?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...MegaSquirt Relay and Power Board Schematics More info at http://www.bgsoflex.com/mspower/mspower.html
Related QuestionsHow does the ignition system work?
Motorcycle Electronic Ignition - FAQsThe points are replaced by optical pick-ups/triggers which consist of an infra-red lamp and sensor, there could be one, two or three of these pick-ups per lamp set depending on the vehicle. A plastic or metal rotor with a cut out blade is fitted on to the points cam/ATU or replaces the points cam/ignition drive shaft.
Related QuestionsTech Stock Oasis: Can It Last?
Frequently Asked QuestionsFear the GMAT? Veritas offers More of Everything 99th percentile GMAT instructors, 15 practice tests, and twice the hours of Kaplan: 42-hour evening and 36-hour weekend courses, private ... Manhattan Review -Worldwide Online/In-Person Class Max your potential with a 770! Most effective GMAT & MBA prep. Unique interactive online GMAT courses & popular in-person crash/long cour..
Related QuestionsHow do stock images work?
FAQs : web2growFor all websites we provide access to a huge online stock library for you to select from. You login to the stock photo website, using a password we provide and you can select and store photos, in an online "lightbox". Our designer can then use the photos you select in their design. However if you would prefer our designer to select a group of photos to use in the design you can.
Related QuestionsHow does the mini-map work in Diablo II?
Unofficial DiabloII.net Diablo II FAQ -- Page OneThere are actually two forms of mapping in Diablo II. The first is the overlay map, and it works just like it did in Diablo, but it's much more necessary now, since there are such enormous outdoor levels, and maze-like dungeon levels, that getting lost is very possible. You can see the new overlay map here, and it is much improved in appearance from Diablo's.
Related QuestionsWhat is IGNITION all about?
Frequently Asked Questions | White River Christian Church | ...It is a three-dimensional worship experience including elements of corporate worship through music, large group Bible teaching, and small group interaction. Find out more about Jr. High Ministry
Related QuestionsIgnition - a design and product development companyIgnition is a design and product development company. We help companies create new ideas and turn them into successful new products.Related Questions
How difficult is it to assemble a MegaSquirt myself?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...It takes most people new to electronics assembly 6-10 hours for their first time assembly of a PCBv3 ECU, a bit less for a PCB2.2, and the stimulator (which you should do first) is very simple and takes maybe an hour to assemble for a first-timer. I'd recommend going to www.google.com and querying for 'Soldering Technique' and reading up a bit, and maybe pickup up a cheapo practice kit if you want to practice your technique a bit before starting in on the MegaSquirt.
Related QuestionsHow big is the MegaSquirt case?
DIYAutoTune.com FAQ / Frequently Asked Questions on the Mega...The box is 6.2" x 4" x 1.75" with mounting flanges on each end that are about .5" long, so total length including flanges is about 7.2".
Related QuestionsWhat is electronic ignition? Distributorless ignition? Coil-on-plug?
Toyota FAQ (frequently asked questions)Electronic ignition has been around a long time; it was invented by Chrysler and used on their cars starting in 1971 or 1972, but didn't hit some automakers until years later (Volkswagen in 1980 - when they already had multiple-point electronic fuel injection!). The system is a computer-controlled way to deliver power to spark plugs without cumbersome and maintenance-heavy breaker points, and with better timing and far higher levels of current.
Related QuestionsHow will the new TECH Fund work?
RamblinWreck.com :: Georgia Tech :: Georgia Tech Yellow Jack...The program will be similar to those in many college sports venues in our conference and across the country. Seats will be purchased with a priority donation component that is based on the location of the seats within the stadium or arena. Obviously, the better the location the higher the accompanying donation will be required. There are still many seats in our football and basketball venues that require no TECH Fund donation at all.
Related QuestionsHow do I setup a Tech Article cross-link to a Blog entry?
FAQsYou can have your article listed in both the blogs and the tech section without retyping it by spending about 1 minute of your time. :-) Scroll to the bottom of the blog entry and click on the "permalink" link. This changes the URL in your web browsers address bar to a permanent web address (URL).
Related QuestionsIF AN ARTICLE IS OUT OF STOCK, IS THERE ANY CHANCE OF NEW STOCK ARRIVING?
KAMASWAMI - E-SHOP FOR ART, DESIGN, HANDICRAFTIt depends on the type of article. For example, once a painting is sold, it is no longer available, but it may remain on the site as an example of the type of work that the artist is currently preparing, even though these new pieces will clearly be different. However other types of objects, for example a bag, even though hand-crafted can be reproduced with the same characteristics.
Related QuestionsHow does the Lunar PIXImus II densitometer work?
PIXImus Frequently Asked QuestionsPIXImus II utilizes Dual Energy X-ray Absorptiometry (DEXA) technology. A small x-ray source exposes the entire animal to a cone shaped beam of both high and low energy x-rays. A high-resolution digital picture (0.18x0.18mm) is taken of an image of the x-rays hitting a luminescent panel. The ratio of attenuation of the high and low energies allows the PIXImus to separate bone from tissue and, from within the tissue samples, the lean and fat.
Related QuestionsII. How do cancels work? A. What is control? control.cancel? How do I receive them?
The Cancel FAQcontrol is a pseudo-newsgroup made up of all posts on a news system containing the Control: header, which is used to create or delete newsgroups, perform internal systems checks, cancel posts, and so forth. It is mostly an administrative convenience. On many systems, control is broken up into several components automatically by the software. If this is true, there are several newsgroups: control.newgroup (for the creation of new groups), control.rmgroup (for the removal thereof), control.
Related QuestionsWill my Radio YourWay LX work with an Ultra II or High-Speed SD memory card?
Pogo Electronics - Frequently Asked QuestionsSorry, but Radio YourWay LX is not compatible with Ultra II or high-speed SD memory cards. The LX will support standard SD cards of up to 1 gig. In Music, Voice, AM, or FM mode, tap the A/B button to switch memory states. There is a small icon near the top of the display that will indicate INT if you're on internal or SD if you're on external.
Related QuestionsWill the ScanGauge II work on my vehicle?
ScanGaugeII - Fequently Asked QuestionsThe Scangauge II will work on most cars and light trucks since model year 1996. There are also some 1994 and 1995 models which the ScanGauge II will work on (see compatibility). There are some vehicles built after 1996 that the ScanGauge II will not work on or has some limitations in the gauges and trip information (see incompatible vehicles). The ScanGauge II will clear the codes and turn off the check engine light on 99% of 1996 and newer vehicles.
Related QuestionsII. How do BuzMe Services work?
Call Waiting, Call Forwarding and other BuzMe FAQWhen you're connected to the Internet, BuzMe Notify uses Busy Call Forwarding provided by your local telephone company to intercept your incoming calls and forward them to the BuzMe system. Instead of your phone ringing busy when you're online and receive an incoming call, BuzMe Notify intercepts the phone call and the BuzMe Call Control Window appears on your screen displaying the Caller ID of your incoming caller and providing you with two call control options.
Related QuestionsHow does TCAS II work?
Southeast Aerospace FAQTCAS II is a system used for detecting and tracking aircraft in the area of an aircraft. TCAS interrogates transponders in other aircraft and analyzes the replies to determine range, bearing, and relative altitude (if reporting) of the intruder aircraft. When the TCAS II processor determines that a potential collision hazard exists, it will issue visual and audio advisories to the pilot/copilot for appropriate vertical avoidance maneuvers.
Related QuestionsHow does an Ignition Interlock device work?
CivilBefore starting the vehicle, the driver must blow into the device. If the recorded blood alcohol concentration (BAC) is above the pre-set limit, the vehicle will not start. Once the vehicle is started, the interlock device requires random breath samples at pre-set times. If a breath sample is not provided or if the BAC exceeds the limit, the device will issue a warning, record the event, and activate specific alarm systems (i.e., lights flashing, horn honking, etc.
Related QuestionsIf I have started a company or work closely with a company can they receive Ignition Award funding?
BU - Office of Technology Development - Ignition Awards FAQNo. The funding is only for use by researchers who have disclosed inventions that have a potential for commercialization, not those that are already commercialized. Funds are awarded only to principal investigators at BU or BMC. If you have started a company based on your research, the OTD has other programs, which may be able to help you. Please visit www.bu.edu/otd for more information.
Related Questions