Yes, new replacement hardware is available, for broken or worn wheels and handles. Most screen doors have replacement parts available from all of our dealers. Contact your local SCREENMOBILE dealer for more information.

Yes, the screen frame is offset to compensate for this. The adjusting screws for the screen wheels need to be facing the interior of the house. If the screen is installed‘backwards’ then the handle hits the patio door.

Simply just start at the bottom and by hand simply roll the screen up just like you would roll up a window shade.

High edges are usually a result of not rolling the tile at the correct time or getting the tile into the adhesive too late. The tile must be rolled at the time the epoxy is becoming tacky and before it sets up. Depending on conditions, the epoxy could take between 30 minutes and an hour and 30 minutes to become tacky. Once cured, the tile will never go down. If the high spots are not too high, using aggressive buffing can help to lessen the affect.

Clean the screen, prime with spray primer (this is actually an optional step), paint the screen. Then stencil. I use cosmetic sponge wedges for the big solid color areas and shade with brushes. You can use the Americana Acrylic paint for the base and shade with the Easy Blend Dry Brush Paint. If you don't want to see the design from the back, be careful with the amount of paint you use if you use the sponges. Back to Top

All bottom rollers in the sliding doors have bearings. In this way system durability and convenience to the user is guaranteed: there is no extraneous noise while opening and closing the door; the doors slide easily, without using physical force.

Aluminum system: anodized aluminum profiles; aluminum profiles with wood imitation finish; aluminum profiles with natural wood veneer.

Our large range of CAVLOCK door furniture incorporates high quality mortice locks and sliding door furniture for both residential and commercial applications.

Position your mouse on the lower right-hand corner of the e-mail message until your arrow becomes a double-arrow. Hold down the left mouse button and drag the window to make it larger. This should correct the formatting problem and remember the new window size.

The Garage Door Screen is mounted (in front of the doorstop, one-inch wood strips) on the header and the doorjambs which the garage door is mounted to.

Roll-up doors are the most common door in self-storage. They are accessed by sliding a latch and lifting the door upward, similar to the motion of a garage door. Roll-up doors allow you to maximize the usage of your space.

We ship you enough self-adhesive loop to mount your size screen with each order. Unless you specify a different color, black loop is shipped with your order. However, you can choose a different color if you like. Colors available are white, brown, beige, and gray.

Yes. The Garage Door Screen is designed to be left up throughout the season. The hook and loop system makes the Garage Door Screen easy to install at the start of the season and easy to remove to be stored for the winter months.

The first time the Garage Door Screen is installed, it might take 30 minutes to install. After that, it takes only a minute or so to put up or take down.

Nothing. Buyers often put ½" conduit or ½" fiberglass rod in the pouch that is sewn into the bottom of the screen. This keeps the wind from blowing the screen.

Everything needed to install your screen is included. Hook and self-adhesive loop fastener, screen, and directions.

AIRLUX units come with window kits for traditional double hung windows - only selected units will work with sliding glass doors and sliding glass windows. In some cases this may require the purchase of additional accessories. Please see the product descriptions and / or contact us for details.

It's not necessary because we install security tracking with our sliders and the door slides into a receiving channel so the door can not be pulled away from its frame (this is the function of a triple lock in a hinged door).

No, you can create a very nice sliding door application by using our L.E. Johnson 2610F wall mount sliding track and hardware. The wall mount application mounts on top of but outside of your door opening and slides right along your existing wall. Also, you can build a pocket door unit, adding

I’m sorry, there are too many manufacturers and styles to know which one fits your door. The best thing to do is take the one you think, looks the closest. It may not work, but if it does it will save you a trip back. Otherwise, its best to bring in your old handle to make a match.

Absolutely! We have the ability to install a lock on the sliding door. Ask us about this option during our consultation. Mirage Idaho Home Screen Door Galleries About Mirage Idaho FAQs Client Testimonials Contact Mirage Idaho Buying Tips

Before adjusting the slide door it is very important to check that the door posts are plumb (vertical on perpendicular sides of the post). Check this with a carpenter's level. You may need to shim under the post's base plates and retighten the anchors. Once you are sure the posts are plumb, check that the track is level, and that the brackets are tight.

Use the OSD and choose the AUTO TUNE. This should clear it up. If not, also use the PHASE option in the menu. Adjust until it is clear.

The door lock mechanism needs lubrication. The best thing is to remove the lock mechanism as well as the handle from the door, soak down with WD40 to free everything up, and grease thoroughly with white lithium grease. This does require removal of the inner door panel. The door handle should also (preferably) be taken apart and cleaned and lubed with lock graphite - after the handle itself is removed from the door, access to the guts of the lock cylinder is easy.

Definitely! Here at Woodfold, we're all about choice, so you can specify that your door be either factory-finished with clear lacquer, custom paint or stain, or unfinished for field application of paint or stain. Should you select an unfinished door, however, extreme care should be taken to ensure that the individual slats are not stuck together with dried paint or stain. This will adversely affect door operation.

If you’re not familiar with a Woodfold dealer in your area, simply contact us directly by calling 503.357.7181 or fill out a Request for Information form, and we’ll get you the name of your nearest Woodfold resource.

Since every Woodfold Roll-Up Door is engineered and crafted for lasting, problem-free performance, we're confident such a scenario will never arise. But if it does, the dealer or distributor from whom you purchased the door will assist with service issues and any questions.

Our standard production lead-time is two to three weeks after receipt of final shop drawing forms and approval of color match, if required. Additional time should be allowed for shipping.