If you have recently installed Defensio, then try to be patient. The filter's learning algorithms take some time (usually no more than a couple weeks) to become very effective, so in the early days of installing the filter performance might not be what you'd hope for. Alternatively, if your blog receives a low amount of spam (say less than 100 comments per week) Defensio will have a smaller sample set to draw from, and may not perform to expected levels.

We expect to be in limited production by third quarter 2001. However, we could have a machine built—without the latest beam delivery invention— and on its way to you in approximately four months from the time an order is placed.

The Omron Instant Ear Thermometer is hospital tested and meets the American Society for Testing and Materials accuracy requirement. For the measurement range of 98.0º to 102.0º F the accuracy is +/- 0.2ºF.

Current sensing is accurate to +/- .15%, and exceeds industry standards for revenue metering. The accuracy of the current output signal is perfectly linear down to 1% of the rated continuous current. Voltage sensing is accurate to +/- 5% and is used primarily in non-metering applications.

If the accuracy is affected, it is negligable. My Browning A Bolt II Boss shoots a Winchester 300 Mag and has had the Stealth-Tech™ bore process. The last three times shooting a target at 100 yards, two of the bullets went in the same hole and the third was off .25 inch. The phosphate coating provides a dry film lubricant that is impregnated into the metal and reduces friction between moving metal parts. The bullet will come out of the barrel faster resulting in improved accuracy.

Accuracy in muzzleloading is determined by the individual and combined characteristics of the firearm, the load and the shooter. Obtaining accuracy can be as much an art as a science.

Importantly, make sure you correct the filter when it has gone astray. Restoring good comments that were incorrectly marked as spam, and marking errant spam as such will help the filter learn -- in a personalized way -- your own spam fighting habits. Moreover, if you do not agree with a comment but it is not spam per se, make sure to delete it instead of marking it as spam.

Recent accuracy is a measure of how well Defensio has been performing on your blog lately. It is computed by subtracting out the errors (false postives and false negatives) over the last 7 days of comment activity on your blog, and dividing this by the total comment traffic over that period. The closer Defensio is to 100%, the better we're doing! Not really. We highly recommend that you use Defensio as your stand alone spam filtering solution.

Improvements in order picking accuracy are dramatic, and accuracy of 99.9% (one error per thousand picks), and often much better, is usually achieved. The improvements that you obtain will depend on your current method of order picking, but if you are moving from a paper-based system to voice directed picking, picking errors are usually reduced by between 80% and 90%.

The methodology related error of quantitative CBF data approaches 10% as the size of the ROI moves above 100 voxels1. In a typical Xenon/CT, a single slice will contain over 20,000 voxels each with a calculated CBF value. One hundred voxels represents approximately 1cm2. The gray matter is composed of less lipid than blood, its solubility coefficient ( l ) compared with blood is 0.7, whereas white matter, which has more lipid content has l of 1.4.

Answer: There will be some checks and balances by comparing the published State and local budgets. Ideally, we will move towards construction of a thematic budget.

Pedometers are designed to be worn at the waistline directly in line with the midpoint of the front of thigh and kneecap. This positioning will be accurate for the majority of users. However, our work has shown that it will not be the best placement for 20 to 30 percent of users. Therefore, the first step that should be taught to students is to find the placement where the pedometer measures most accurately. The following protocol will assure the pedometer is measuring accurately.

National Cholesterol Education Program (NCEP) has recommended that CDC's reference methods be used as the accuracy base for measurement of total cholesterol, HDL cholesterol, LDL cholesterol, and triglycerides. The Abell-Kendall reference method for cholesterol (the AK method) is recognized as an integral part of the National Reference System for Cholesterol. The AK method is the basis for quantification of cholesterol in the reference methods for HDL cholesterol and LDL cholesterol.

Your device needs to be calibrated and then checked by a Factory Authorized calibration technician. If you have not been certified by Intoximeters to calibrate your EBT, then you should send the device to the factory for calibration or locate an authorized calibration technician in your area. DOT says that inspection, maintenance, and calibration of EBTs needs to be done according to specific criteria - which are set forth in the manufacturer's quality assurance plan (QAP).

You may wish to think about your swinging technique: If you use Mechanical Advantage then your muscles do less work. A long pendulum stores more energy than a short one; think of knocking in a nail by grasping the hammer head or holding it well down the shaft! This gives you the longest pendulum. The wrists can flex at the start of the stroke and/or at the end of the follow through.

All of our machines have an automatic calibration feature built in. You do not have to calibrate the machine for one full year as our machine has a platinum fuel cell.

OMAX generally advertises ±0.005" (±0.1 mm) as a typical tolerance for most parts. However, for thicker parts, it may be difficult to achieve. For thinner parts, the advanced user can sometimes get ±0.002" (±0.05 mm). This is accomplished by slowing down the cutting process, and being very careful with the setup. Some OMAX customers even report tolerances as high as ±0.0005" (±0.01 mm), but OMAX considers them to just be lucky.

All models of Omron's blood pressure monitors are clinically proven accurate. Pressure is plus or minus three millimeters of mercury or two percent of reading. Pulse is plus or minus five percent of reading. This meets or exceeds the AAMI standards. AAMI is the Association for the Advancement of Medical Instrumentation.

The Search Engine Marketing Consultation ? is a professional search engine positioning training company that does monthly updates of their courses, Essential Foundations of Search Engine Positioning and Advanced Search Engine Positioning. SE-Optimizer includes monthly updates from engines like Google and Inktomi, as well as directories like Yahoo! The yearly subscription will be $75.00 a year. You will receive a renewal notice at the end of your first year of use and each year after that.

A precise set of client approved guidelines is specified in the contract. Basically, there is a sliding scale with penalties set per error; more severe errors receive greater penalties. Severity follows the AAMT guidelines. The length of the document is factored in, but the effect is that a very minimal number of errors disqualify a report from achieving the required 98% accuracy.

Accuracy in measuring evaporation rate through a semipermeable membrane is ± 10% (TEWL > 5 g/m²h) or 0,5 g/m²h (TEWL< 5 g/m²h). This is tested against gravimetric evaporation rate (mass change of water samples covered with vapour permeable membrane). The coefficient variation (CV), when measured from water sample, is less than 6%. When measuring the skin, the CV is typically less than 10%.

Accuracy is dependent upon many factors: powder characteristics, fill size, tooling size, speed, bulk feed system etc. Typically, we might expect ± 1% volumetrically, a little better for easy products, a little worse for more difficult ones.

Accuracy can only be predicted in statistical terms. In general, the accuracy depends on the quality of the GPS receiver used with OmniSTAR; that is, a "Recreational" class GPS will give poorer results than a "commercial quality" receiver. In this case, "poorer" means larger semi-random errors relative to the true position.

I am truly impressed!! You have my undying gratitude. I will never bid without you again. Thanks, thanks, thanks again. Well worth the investment!!" Choose the category that your question best falls under and find the answer you're looking for. If you aren't finding the answer to your question email us and we'll be happy to answer your questions and address your concerns.

PokerPincher attempts to be as accurate as possible in our pricing, as well as our typographical and photographical descriptions of products. However, we cannot guarantee that product descriptions, specifications, pricing, or any other content on PokerPincher is accurate, complete, or current.

For the most part, the appropriate weight range interval for a gem ranges from 0.3-0.5 ct. to tens of cts. This interval range is used for every gem variety throughout the appraisal process. This means that you can rely on the valuation if your gem falls within the specified weight range. You may of course appraise heavier stones, but be aware, such pieces are very rare and we consequently have little statistical data on them. You would do better showing your gem to a specialist offline.

We quote 3-4cm. Its normally better than this, however so many factors affect accuracy that we won't specify anything better than this. The speed of sound in air is approx. 346m/S at 24 degrees C. At 40KHz the wavelength is 8.65mm. The sonar's detect the echo by listening for the returning wavefronts. This echo has an attack/decay envelope, which means it builds up to a peak then fades away.