The short answer to this is no and the long answer is maybe. As the USB port is un-powered, this rules out a lot of the more interesting applications such as WiFi. The primary use will probably be for transferring files and similar data uses. That's not to say other uses won't appear. Where's there's a will, there's usually a way!

All computers are equipped with multiple ports for inserting USB devices. Most workstations have a USB cable that is attached to the table for more convenient access to the ports.

The answer is no, your AC/USB Boostaroo isn't defective. What you are hearing is the transient noise that your PC produces naturally through oscillation of your power supply and the hard drive whine caused by its mechanical spin. These noises are much more common in older PC's, but a lot of newer PC's have noise filters built into the PC's USB ports, which eliminates these noises. If this problem is occurring, we recommend using the AC power supply for your Boostaroo instead of the USB cable.

Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port.

Use the KeyCarbon USB just like a regular USB extension cable - unplug the USB keyboard, plug it into one end of the extension cable, then plug the USB extension cable back into the PC.

The Andrea USB adapter is a half duplex device which means that it does not allow you to listen and talk at the same time. Part of the reason the Adapter works so well with our mask is that it does not have additional computer to audio signals to corrupt the input signal from the Sylencer. Instead, it provides a jack and adapter cord (with pink ends) that will plug into the USB wire side of the adapter that plugs into your computer sound card.

None of this has been asked by journalists and Sony hasn't mentioned it so it's fairly sure to say "no" to this one. Making it impossible makes sure that people buy more Memory Sticks.

First, try plugging the USB Drive into the port that is most convenient for you. If your computer does not recognize your USB Drive, it maybe due to a lack of power provided from that specific port. USB ports located on keyboards or on the front of your computer may have insufficient power to run a USB Drive. Try using a port on the back of your system if the USB Drive is not being recognized.

You can power your BibleStick through the USB port on your computer (and save your battery), but it won't recognize your BIbleStick as a data storage device, so you can't erase this and put something else on it.

Assuming you are only making a temporary move to the UK, there will no doubt come the time when you agonize over what things you should leave behind and what you should take. Obviously this is a personal matter, but here is some advice based on my experience. If you particularly like to cook, take your favorite cookware with you. You'll hit yourself for having to pay all over again (at higher prices) for the favorite cast iron saucepan that you use for making spaghetti sauce, say.

The simplest way is to look for a Certified Hi-Speed USB logo on the retail packaging or on the product itself. The logo is exactly as shown on the right; it tells you what you are plugging into your USB port has passed the Hi-Speed compliance tests, meaning the product can enter Hi-speed USB mode if your system supports it. USBInfo & SiSoftware Sandra can also report USB speed status.

A. The USB and PS/2 ports on your USB Mobile Port Replicator with Ethernet are supported by the Windows 98, ME, and 2000 operating systems and do not require any additional drivers. However, drivers are required to recognize the Parallel, Serial and Ethernet ports and convert them to USB. Move the cursor to the My Computer icon and click the right mouse button. Click Properties to display the System Properties window. In Windows 98/ME, simply click the Device Manager tab.

You need to be using an Ethernet connection to use our service. If your Internet modem only has a USB port, you can purchase a ???USB to Ethernet??? converter to connect to a router. Then you can connect your computer and the SPA-2000 to the router.

The USB Flash Drive has two partitions on there. One is a 1.44MB size (size of the floppy disk) and the other is the remainder of the flash memory. If your PC/MAC is not showing both partitions then there could be one of two things wrong (not serious). On the side of the pen is a write-protect switch. Move the switch to the unlock sign and plug it into your USB socket. You should now have two drives in Windows Explorer. Make sure that you eject the device safely before moving any switches.

On Windows® 98 Second Edition, be sure that the application (reading or writing of data) has finished operations, and that the access lamp on the USB Flash Memory TransMemoryTM is not flashing. On Windows® Millennium Edition, Windows® 2000 Professional, Windows® XP Home Edition, and Windows® XP Professional Edition, make sure that in the task bar USB Flash Memory TransMemoryTM has ended and it is safe to remove it.

Windows reads the autorun.inf file (if available) when you plug in your USB device. However Windows handles USB devices and CDs differently. Usually the file specified in the autorun.inf file is not executed but a dialog pops up, letting the user decide what to do. You can change this behaviour on your local system, but of course these settings are useless when you plug in your storage device to another PC.

If you have Easy CD creator 5.0 or 5.01 Platinum this can occur. Apply the 5.02c patch from the link below. Uninstalling Take Two will also correct the issue.

Yes- The IP Phone Adaptor should work properly when plugged into a USB hub. If experiencing problems with a IP Phone Adaptor using a USB hub, plug the vPhone directly into the computers USB port.

External HDDs need to be formatted as FAT32 drives in order to be recognized by the CM4. Please re-format your drive as a FAT32 drive and it should now be seen.

PD-099-128MB does not requirement driver installation on Win2000, WinXP. If you are using Win 98 / 98SE, please download the driver from our web site No driver is needed for Windows OS except Windows 98.Please download from below site for Win98/98SE OS When I upgrade the firmware, the player stop his function, no backlight, shutdown even with full battery. The button power don't power on the device.

No. USB is designed to have two types of devices - a host (like a PC or Mac) can talk to and control other devices, while those other devices can't talk to each other. USB ethernet adaptors are designed to plug into computers, while the USB connector on the Toppy is the same sort as you'd find on a printer, or an external disk drive - in other words, it simply doesn't provide the functions necessary to link to anything like an ethernet adaptor.

This web site features movie clips, songs, sounds, and other existing features that need certain programs to work. These software products go by different names, like "helper applications" and "plug-ins," and each will make your experience at this web site even more enjoyable. See your browser's help for more details.

Plug-ins are software modules which enhance your browser's capabilities. The plug-ins needed on this site allow your browser to display different types of audio or video content.

Note that if you simply want to disable the plug-in for a while, you can do this by unticking the "Enable SpamBayes" box on the front page of the "Manager" dialog. If you installed the plug-in from source, then you simply need to re-run the "addin.py" script, with the parameter "--unregister", and then delete the toolbar in Outlook.

It may be caused by interference or bad contact points. Try unplugging the device and then plugging it in again. It is possible that the USB support option inside the BIOS has been disabled. You can enable USB support in the CMOS functions menu when your computer is booting up. Although the file RYDLL32.DLL is under the same directory as the program, FoxPro and VB programs will only search for DLLs under the system directory, so you should copy the file RYDLL32.DLL into the system directory.

A USB pen drive/jump drive/USB key/bullet drive (hereafter referred to as "USB Drive") basically works exactly the same as a 3.25in floppy disk or a CD, and should be treated as such. If you feel the need to scan it for viruses, it will probably show up in My Computer as "removable disk."

Search Amazon.

There are occasions where there is a short lag time between submission and availability. Fear not, our servers are plugging away 24/7 to make sure all work gets posted. (return to top)