Of course you can use these drives with intradisk, as long as you don’t have extreme requirements on the robustness. You can of course run the device permanently, only the hard drive will be automatically shut down for stand-by. See also our notes about the reliability of hard drives, 24/7 contiunuous operation and continuous access.

No, this is not a virus scanner. Instead it protects you against viruses which are running in a proactive manner.

The following links will guide you to more information about hard drives and the data recovery process. We will work with you in a timely manner and are qualified and ready to help you recover your data. Let our experts and our 20 years of experience work to help you ensure your data is never lost!

You can create a large number of ProDOS partitions on a SCSI hard disk but only four can be mapped at any time as Smartport devices. When you start the Macintosh, the ProDOS file system extension will mount the hard disk partitions on the Mac desktop. Files can be dragged between Mac and ProDOS volumes in the normal way to copy them. When you start the IIe card software, ProDOS partitions are unmounted from the Mac desktop until you quit using the IIe card.

Yes. If you want to back up both system drives, you will need to install two DPSR drives. SystemGuardian XC/2000 will backup any number of drives that your operating system and hardware supports.

Yes. The DPSR drive needs only to be of equal or larger size than the volumes you wish to protect on the system drive.

RAID (Redundant Array of Inexpensive Disks) systems are faster and more durable than single large hard disk drives. A RAID system stripes or mirrors your data across multiple hard disk drives. Therefore, when you access your data, all the disks are working at the same time, giving a major increase in speed. The RAID hardware controller also contains a large memory cache which dramatically increases performance.

Some people have had luck with 'readmail' for reading only, and at 1.65 either mush or pc-elm should work for read/write. Version 1.65 has MMDF-style mailboxes with messages separated by four control-A's, so mush and pc-elm should be able to read/write these messages, though you'll have to reindex your mailbox with 'makebox' or the like if you write to it.

No, all hardware components of our rented servers are property of Crucial Paradigm. If you wish to have an upgrade you will rent the hardware from Crucial Paradigm and we will install it.

Our company is dedicated to data recovery from different hard drives, but we do not undertake repair only. Our work entails recovering data and supplying it on a suitable replacement medium (CD-ROM or new hard drive) so that the client may access the lost data once more. The original hard drive is returned but we do not recommend that it is used again.

A hard disk drive consists of a mechanical part (HDA) head-and-disk assembly and a (PCB) - printed circuit board. HDA acts as a case for all mechanical parts of a drive and contains one more chip performing the functions of a preamplifier/commutator. The PCB consists of series of chips which control the mechanical parts, encode/decode data on the platters/magnetic surfaces, then transfer the data through an external interface. Generally, PCBs are located outside HDA, in its lower part.

The client is responsible for removal of all company data prior to return of an asset to IBM. However, we do offer an optional disk sanitization and cleansing service that overwrites their data. Hard-file data is cleansed via a 3x overwrite process so that data is virtually irretrievable. This option meets Department of Defense 5220-22-m 3-pass standards. All nonfunctional or non-marketable hard drives are "hammer destroyed".

No worries. You do not have to worry about the removal of company data prior to return of an asset to Retire-IT. Our process adheres to the Department of Defense standards. We overwrite every working hard drive so that data is virtually impossible to recover. If a hard drive is inoperable, or the overwrite procedure cannot be verified, Retire-IT physically destroys the hard drive to ensure data is secure.

For Model AB64: please consult the AB64 User Manual to calculate your size requirements and installation instructions. For the model AB64 we currently recommend the Samsung SpinPoint models PL40 SP0411N (40 GB), P80 SP0612N (60GB), P80 SP0802N (80 GB), P80 SP0812N (80GB), P80 SP1203N (120GB), P80 SP1213N (120GB), P80 SP1604N (160GB) and P80 SP1614N (160GB). These drives are extremely quiet, have a very good warranty and include mounting hardware.

Yes, but only within Canada, due to warranty considerations. Because of the volatility of the market, contact us for current pricing.

The notebook drives are quite good value at ~$100 USD for 40-80GB. I've used a second-hand laptop drive salvaged from a "damaged" laptop I bought on ebay for ~$25 USD.

DV has a data rate of 3.6 MB/sec. This means that in order to capture DV onto a hard drive in real-time the hard drive must be able to sustain at least 6 to 9 MB/s minimum. Note that peak data rate such as the 160 or 320 MB/s you hear about has nothing to do with sustained data rate. Our systems have lead the way for both data rate and size. We have introduced many industry firsts in the storage area. Even our low-end systems today have drives that will sustain over 20 MB/s.

Like most this these days hard drives have a MTBF (Mean Time Between Failures). Due to a hard drive architecture it will eventually, it’s just a matter of time. Most cases of media failures are either due to physical failure of the media or due to human error.

Simply put this is to your advantage for both cost and flexibility. Disk recorders with built in Hard drives require the entire unit be used together. With the DR-DV5000 the drive is removed from the core unit and connected to the computer for the editor to use. Another drive can be inserted into the DR-DV5000 so the videographers can continue to shoot. You can also choose the size of drive that suits your needs. There will be 20-40-60- & 80 gig drives available.

We never recommend anything other than a single disk install or multiple disks of the same type. Anything else and you are following an unrecommended setup and you will need to navigate for yourself. Repeat, we never recommend anything other than a single disk install or multiple disks of the same type. If you're thinking of doing anything else (setup your own partitions), read this section again.

If you do not see your hard drive in this list please contact us, (617) 491-1001, we may still be able to help!

Yes, Heatsoft Clone Cleaner supports the ability to scan multiple hard drives, including external drives like JAZ or USB. You can add several paths or drives to the Current search set.

While not native, SAS hard drives can be used on SATA desktops and workstations by adding a host bus adapter.

A workaround for those who must have 2 CD-ROMs visible at the same time is to use vvfat. Mount one of the CD-ROMs, and pass it as a hard disk via -hdd fat:/mnt-point. These will look like hard disks to the guest OS, and thus are not removable.

I just can not belive Ghost has droped the ball on this and is still requiring people to use floppies. The directions are clear, straight-forward and accurate. This is the most well-put-together doumentation I've EVER found relating to Ghost. I've worked with (read: struggled with) the program on and off for years, and have never found any documentation anywhere near this caliber. This is the guide I was looking for since Symantec are so incopetent to write it for us.

Yes you can. Mineral buildup is a problem where the water is heated, i.e. in the tank. The water is being cooled in the tubing so mineral buildup is not possible in the tubing. Mineral buildup in the tank can be minimized by using a powerful heater so that you can have low operating temperatures. Mineral buildup is not likely at temperatures below 1400 F.

We do not think so. (Didn't you know we would say that? <g>) The system has question marks beside each of the major functions your account can perform. Read those explanations and you are probably going to be able to do what you need done. But if you have a problem, and those explanations did not help, you are welcome to contact us for more assistance.

Focus Enhancements learned in mid 2005 that many newly manufactured drives were not compatible with the FS-1: they either could not be formatted by the FS-1, or if they did format, they did not correctly record video and audio from the FS-1. We tested four new drive enclosures from Wiebetech. Weibetech is a manufacturer whose drives we have OEMed for FS-3 disk enclosures, and for FS-2 enclosures as well.