Yes, with care. A basic R installation is relocatable, so you can burn an image of the R installation on your hard disc or install directly onto a removable storage device such as a flash-memory USB drive. (If you have installed packages into a private library, their absolute paths will appear in the HTML packages list.) Running R does need access to a writable temporary directory and to a home directory, and in the last resort these are taken to be the current directory.

A CD-R (CD Recordable) or CD-RW (CD ReWritable) isn't required for utilizing the DART Karaoke Studio, but you will be missing out on SOME exciting features. If you have a CD-R/RW installed on your system, you'll have the capability of creating your own audio CDs that feature YOU as the lead vocalist for your favorite hits! This process has been greatly enhanced by the addition of the included CD-Recorder 4 Basic version (A $50 dollar value FREE) to guide you in this process.

You don't actually HAVE to have one of these to use the software. However, you'll get very little use out of the program if you can't burn CDs (that is what it's made for, after all). There are users who run DartPro 32 simply for the restoration filters (DeClick and DeHiss) and for the ability to convert MP3 files to WAV files or MID files to WAV files.

That's fairly easy: You simply need to add a line to your CONFIG.SYS file, for example: DEVICE=C:\CDROM\IDE_CD.SYS /D:CD0001 Please change C:\CDROM\IDE_CD.SYS to your cd driver for DOS. You can get the driver with the drive on a diskette or try to use a different one from www.simtel.net. The example shown above is for MS DOS, for FreeDOS it would be FDEX /D:CD0001 and for DR DOS it would be NWCDEX /D:CD001). Look also at What is conventional memory? (2.

USB ports are much more common than CD and especially DVD burners, so your USB memory stick or flash drive will work with more computers than a CD-R or DVD-R. Also, the process of uploading files from your computer to a USB flash drive is much faster and simpler than burning a CD or DVD.

this point you cannot do this. We want this feature in Dash, so we are investigating solutions. When we come up with a good solution, it will certainly be announced.

Yes! You can run Vidalia from a USB drive, perhaps for a portable Tor/Vidalia/Polipo or Tor/Vidalia/Privoxy combination, by using Vidalia's -datadir command-line argument. The -datadir argument tells Vidalia where you would like it to store all of its configuration and application data. For example, you might have a batch file on your USB drive that starts Vidalia as follows: vidalia -datadir "." The above line would tell Vidalia to use the current working directory as its data directory.

All computers are equipped with multiple ports for inserting USB devices. Most workstations have a USB cable that is attached to the table for more convenient access to the ports.

The location of USB ports varies by machine. Look for a flat rectangular opening. If you're in a lab, ask the lab assistant for help. You must be patient when printing on a network, especially when printing a file with a lot of graphics. Do not keep resending the print job - that only makes the problem worse. Open the printer control panel and see if your job is in the queue. If it is, and you've been waiting more than 5 minutes, ask a lab assistant for help.

Generally speaking, booting from USB disk, CD/DVD drive is supported on x86 platforms with S10 update 1 and later if the BIOS has USB 2.0 support. Before you can boot Solaris from USB disk, you have to install Solaris on the disk first. Installing on USB memory sticks is not recommended as the number of writes to these sticks is limited. Installation from USB CD/DVD drive starts, but then fails with "not finding media" error.

Ultera's CD-R MultiMaster™ controller virtualizes up to twelve CD-R drives using RAID to operate as a single CD-R device. Ultera CD-R MultiMaster™ controller solutions provide seamless scalability to grow as your needs grow.

No, they were burned onto the CD-R before I made the offer; I'll usually tell you roughly what's on the CD. It'll definitely be OTR.

The drive is either not supported or not installed correctly. If the Player is running on the Windows XP operating system, take the following steps: Check the Hardware Driver Quality page at the Microsoft Web site to ensure that the drive is designed for use with Windows XP. If it isn't listed on this site, it may not work correctly. To verify that your CD drive is recognized, open My Computer. Then in the Devices with Removable Storage area, right-click the drive, and then click Properties.

For CD-R disc: Verbatim, 700 MB, 1x-32x speed. (Please note that CD-R disc will record at maximum 8x speed only.)

These instructions are intended for users who do not have a built-in floppy drive in the machine being used to run the LANforge bootable CD-ROM. The USB floppy drive should already have a disk in it with a license.txt file that you obtained from sales@candelatech.com. Insert the Universal Host Controller Interface Host Controller Driver kernel module: insmod /lib/modules/2.6.18.2/kernel/drivers/usb/host/uhci-hcd.ko Copy the license.

Under Windows 95/98/ME/XP/NT/2000 you must make sure that the following settings are enabled/disabled for all CD drives on the user's system (CD Readers and CD Writers): Make sure that your IDE/ATAPI drivers for your motherboard are updated. Some motherboards have an issue sending data to a CDR/DVD if these drivers are not updated. If you have a writing problem, this is one of the first things you should check. Device Manager - IDE ATA/ATAPI Controllers.

quot;If you have a DVD burner and movies you'd like to make backups of, you may want to get it--while you can."

No. Your computer's CD-R/RW drive or "burner" can only make CD-R and CD-RW discs. They cannot possibly create any of the recordable DVD discs. To create recordable DVD discs, you will need a dedicated DVD drive for the appropriate recordable DVD format (e.g., DVD-R/RW, DVD+R/RW, or DVD-RAM).

The unit is switched to the upper playback drive. Since there's no disc for the laser to read in the playback drive, the display reads "CD NO DISC." Switch down to the record drive by pressing the "Stop" key in the lower right hand corner on top of the unit. The "Stop" key will be illuminated. Or, press the "CDR" button on the supplied handheld remote to switch drives. The "Phone Selector" is incorrectly set. Switch to the "LINE OUT" setting to monitor playback from either drive.

You cannot record on DVD-RAM using a CD-R/CD-RW recorder; you need a dedicated DVD-RAM recorder and authoring application.

Yes. Writing to CD and DVD discs is supported as long as you have some packet writing software installed on your computer. It usually comes bundled as a part of larger CD / DVD recording software packages and makes your CD or DVD drive act as a standard, transparently write-enabled drive. Packet writing software uses UDF-formatted CD and DVD discs, and allows GRBackPro to write to your CD / DVD drive by treating it like a hard disk or a floppy diskette, using the regular drive letter.

Hewlett Packard provides a custom USB port driver that we were not monitoring. Support has been added in a maintenance release of busTRACE. Please download the latest busTRACE 2002 update.

Encrypt the entire USB flash drive. However, you will not be able run TrueCrypt from the USB flash drive. Create a TrueCrypt file container on the USB flash drive (for information on how to do so, see the chapter Beginner's Tutorial, in the TrueCrypt User Guide).

It is certainly possible to install and run the standalone verion of Gong on a USB drive, given that the machine the USB drive is attached to has an Internet connection. The Gong application requires only the files in the installation location in order to run. Therefore it is sufficient for it to run even if it is installed on a USB drive.

Double-click your My Computer icon and then select your CD-Rom drive. When your system displays the CD's files, double-click SETUP.EXE. The installation process will then begin.

Make a 'key.dat' file (see below) in the same directory as the PerformanceTest executable file (pt.exe). That's it, you're finished. PerformanceTest should now run from a CD or USB memory stick and pick up the license information automatically. Using the Windows Start / Run menu option you can for example enter the following 'd:\pt.exe' (specifying the appropriate drive letter) to start PerformanceTest from the CD or USB memory stick. Save the file in the same directory as pt.

You can use Folder Guard to restrict access to the CD-ROM or floppy drive, but that would not encrypt the files on the CD or floppy disk. It means that if you take the CD or floppy to another computer, without Folder Guard installed on it, the disc or floppy would NOT be protected. If you want to protect the removable drive so that it would be protected even if you remove it from your computer, you need some sort of encryption software to do that. (Folder Guard does NOT do encryption.)

CD-R is short for "CD Recordable". Recordable CDs are Write Once, Read Multiple media that work just like...