Robinsons greenhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large Robinsons greenhouses can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

Most Summer greenhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large buildings can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

Eden greenhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large Eden greenhouses can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

Alton greenhouses and summerhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large Alton greenhouses and summerhouses can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Robinsons greenhouses can be laid on any hard flat surface including well compacted soil but paving slabs or concrete are best.

Most Summer sheds are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large sheds can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times. You should not attempt to lift heavy sections without a helping pair of hands.

Most Summer summerhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large summerhouses can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

Most Summer playhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast using only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. You should not attempt to lift heavy sections without a helping pair of hands. Remember that extra time spent preparing a good base is normally repaid with time saved later on during the installation.

All Summer log cabins are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large log cabins can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times. You should not attempt to lift heavy sections without a helping pair of hands.

Compton garages are not suitable for DIY assembly. Free professional installation installation is included within the price.

Many of our garden offices and garden rooms are only available with free professional installation included in the price. Some are suitable for DIY assembly. Assembly is a satisfying project for any DIY enthusiast. Even large buildings can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles.

None of our garages are suitable for DIY assembly. Both our sectional concrete garages and our wooden garages include free professional installation installation within the price.

Malvern greenhouses, sheds, summerhouses and playhouses are all suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large Malvern buildings can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

The space will always be used, so buy the biggest Robinsons greenhouse you can afford provided that it fits comfortably in the space available. There are no precise guidelines regarding the size. Often the size of the greenhouse is dictated by the space available. Robinsons offer a wide range of greenhouse sizes to suit every space. If you are replacing an existing greenhouse, you should consider whether to have the same size again or perhaps larger.

Ideally your Robinsons greenhouse should have a clear space at least 18" wide on all sides, if possible. This ensures easy access for both installation and future maintenance. In reality this is often not practical and at many sites it is not needed. A reduced clearance is often possible on one or two sides. You should cut back or remove any nearby shrubs and trees. Remember to allow for future growth.

Inexpensive bubble insulation can be easily fitted to the frame of a Robinsons greenhouse. Heaters are also available. Selected Robinsons greenhouses are available with internal partitions to provide for warm areas. Selected Robinsons greenhouses are available with shading kits to protect plants from scorching.

Although providing an electricity supply to a Robinsons greenhouse is normally a straightforward task, for safety reasons we recommend that you consult an approved electrician first. Since January 1st 2005 all electrical work must be completed in accordance with IEE wiring regulations and BS 7671. Notifiable work must be either notified directly to the local building control department or completed by an operator who is approved under the Part P Electrical Competent Person Scheme.

Aluminium is an excellent material for Robinsons greenhouse frames for many reasons. It is strong and at the same time very light with a higher strength to weight ratio than any other commonly used greenhouse framing material. In addition, aluminium needs no protective coating and it can be used in its natural state. Aluminium won't warp, rot or rust and it is non toxic.

All Robinsons greenhouse frames are guaranteed for 12 years. One of aluminium's greatest attributes is its natural ability to withstand corrosion. An excellent example of its durability is the roof of the San Gioacchino church in Rome, which is roofed in aluminium and it is still in great condition after 100 years. Even after a hundred years of exposure the worst that happens is the surface takes on a rough grey texture as it very gradually oxidises.

The outside of your Robinsons greenhouse glass can be cleaned using a mild detergent in warm water. All surfaces should be cleaned using a soft cloth, a sponge or a natural bristle brush. Cleaning the inside of the greenhouse can only be done outside the main growing season, probably in late September or October. For the plants sake use a mild disinfectant cleaning fluid as this will kill off any pests which could harm the plants.

The BBC website has a useful gardening section with tips for greenhouse owners and advice about growing fruit and vegetables, propagation and other topics - click here to visit the BBC website gardening section. Why not grow chillis in your greenhouse? Chillis are in the same family as tomatoes and grow in similar conditions - click here to visit the chillisgalore website for everything you need to know about chillis.

Your Robinsons greenhouse will be delivered by prior appointment with you. Robinsons greenhouses are normally delivered in long boxes with the lengths of aluminium and smaller packs of the glazing. Access through the house may be possible if there is a straight route. Please advise us if there are any access restrictions at the site.

The majority of Robinsons greenhouses do not require planning permission. However, permission is required for any greenhouse which covers over half the garden, which is not for domestic use or which is over 3 metres high with a pent roof or 4 metres high with an apex roof. If you live in a terraced or town house you are normally entitled to build up to 50 cubic metres of extensions without planning permission. In a detached or semi detached house the permitted volume is 70 cubic metres.

In order to maintain the high quality finish a powder coated Robinsons greenhouse can be cleaned regularly. The frequency of cleaning depends on the environment. If your greenhouse is in normal urban use a maximum interval of 18 months is recommended. In coastal areas or areas of pollution a greenhouse should be cleaned more frequently. The outside of the greenhouse can be cleaned using a mild detergent in warm water.

The majority of Robinsons greenhouses do not require approval under the building regulations. However, approval is required for any greenhouse with an internal floor area of more than 30 square metres. The standard Robinsons greenhouses are less than this size. However, it is possible to exceed 30 square metres internal floor area if you add extensions to the standard Robinsons greenhouses.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Greenhouse bases can be laid on any hard flat surface including well compacted soil, paving slabs or concrete. However, a greenhouse without a base requires a brick or concrete plinth built to precisely the right size.

assembly is sometimes described as a logical .EXE or .DLL, and can be an application (with a main entry point) or a library. An assembly consists of one or more files (dlls, exes, html files etc), and represents a group of resources, type definitions, and implementations of those types. An assembly may also contain references to other assemblies. These resources, types and references are described in a block of data called a manifest.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Greenhouse bases can be laid on any hard flat surface including well compacted soil but paving slabs or concrete is best.