How do I hook up a Bag End Infrasub-18 to my Digital 5.1 Surround system?
Frequently Asked QuestionsUsing the "Bass Management System" on your surround processor, set the front Left and Right speakers to "large" (full range). Connect the Left and Right outputs on the processor to the Left and Right inputs on the Bag End Infrasub-18, respectively. Now, connect the Left and Right hi pass outputs on the Bag End Infrasub-18 to the Left and Right inputs on your amplifier (which powers the front Left and Right speakers), respectively.
Related QuestionsMy Bag End Infrasub-18 makes a “pop” noise when I shut it off. Is this normal?
Frequently Asked QuestionsYes. The noise is due to discharging capacitors in the amplifier. It will not harm the unit in any way. To avoid the noise, the Bag End Infrasub-18 may be left on at all times. This, also, will not harm the unit and power consumption, when not in use, is negligible. The Bag End Infrasub-18 has a built-in thermal shutdown circuit which engages when the amplifier panel reaches a specific temperature.
Related QuestionsDo the HDMI outputs support 5.1 surround sound?
Kaleidescape - FAQ (Frequently Asked Questions)No, the HDMI outputs on the Movie Player and the Movie Player 2 carry video and PCM stereo audio only. When using HDMI for video, you can use digital coaxial, digital optical, or analog stereo outputs for audio. No. The DVD CCA License does not permit the use of RGBHV video output during DVD playback. The Kaleidescape Movie Player 2 supports both HDMI and component video (YPbPr) for high-quality video output.
Related QuestionsHow I can hook up my 5.1 speaker with my computer?
Lowyat.NET -> FAQ for Edifier SpeakersPlease read your user manual and follow the instruction connecting you speaker system Carefully. Then Using Edifier's 3 Audio connecting color cords(1 3.5 Stereo Headphone plug converted to 2 RCA) connect your speaker to computer's Sound Card like the picture show below. Brown (Center/Sub output); Blue(Input);Pink (Microphone);Green(Front output);Black(Rear/Surround output) After done the connection, you have to do some setup work for sound card.
Related QuestionsDo all Dolby Digital programs provide 5.1 channels?
Dolby Digital FAQ - Frequently Asked Questions About Dolby D...No. Dolby Digital soundtracks can provide anything from mono to full 5.1-channel surround sound. DVDs of movies can even carry multiple versions of the soundtrack that differ in number of channels. A disc might contain a 5.1-channel sound mix with the dialogue in one language, a two-channel mix encoded in Dolby Surround in another language, and a mono track with the director's comments or other supplementary information.
Related QuestionsHow do I create a 5.1 Surround Mix?
ACIDplanet.com: Help: FAQHere's how to use your ACID software to create a 5.1 Surround Mix that you can upload at ACIDplanet.com. Select Properties from the File menu. On the Audio tab, select 5.1 Surround from the Master Bus Mode menu. This will allow you to mix in 5.1 Surround. When you've finished creating your 5.1 Surround mix, choose Render As from the File menu to display the Render As dialog.
Related QuestionsWill it have 5.1 surround sound?
Planet Doom - Movies, Maps, News, Resurrection of Evil, Chea...Indeed it will. DOOM 3 will have the latest in Dolby 5.1 audio surround sound for full gaming experience!
Related QuestionsCan I record in 5.1 surround sound?
DVRs FAQDVRs with HDTV recording capability can record multichannel audio information. Currently there are only a few HD-capable DVRs. Keep in mind, though, that even if your DVR can't record in 5.1, an A/V receiver with Dolby® Pro Logic® II or Dolby Pro Logic IIx can expand any 2-channel signal into convincing 5.1, 6.1, or even 7.1 surround sound.
Related QuestionsAre all iO channels transmitted in stereo?style="mso-spacerun: yes"> Dolby Digital? 5.1 Surround?
iO Faq from Yahoo! Cablevision_Digital Forum Optimum Online ...Digital Version 2.1 or 3) at various times according to their programming.style="mso-spacerun: yes"> Some of the video-on-demand premium channels
Related QuestionsHow can I hook up my 5.1 speakers to my computer?
Edifier Support:FAQPlease read your user manual, and follow the instructions connecting your speaker system carefully. Using Edifier's 3 Audio connecting color cables (3.5 Stereo Headphone plug converter to 2 RCA) connect your speakers to the computer's Sound Card as in the illustration shown below. Brown (Center & Sub output); Blue (Input); Pink (Microphone); Green (Front output); Black (Rear output) After completion of the connections, it may be necessary to further configure the Sound Card.
Related QuestionsHow does 5.1-channel Dolby Digital differ from Dolby Surround?
Dolby Digital FAQ - Frequently Asked Questions About Dolby D...The technology behind 5.1-channel Dolby Digital provides two surround channels, instead of the one from Dolby Surround, for more precise localization of sounds and a more convincing, realistic ambience. Also, Dolby Digital's surround channels cover the entire audible range (20 Hz-20,000 Hz), whereas the range of Dolby Surround's single surround channel is limited (100 Hz-7,000 Hz). The increased range of Dolby Digital further heightens realism and gives sound mixers more creative freedom.
Related QuestionsVIRTUAL SURROUND 5.1 What is virtual surround?
Surround Associates - Specializing in all aspects of surroun...Virtual surround (sometimes referred to as "3D Audio") is the ability to simulate multichannel program (usually 5.1) from only a single stereo speaker system. Virtual surround provides varying degrees of realism (ranging from pretty good to not very convincing), depending greatly upon the program source and the room acoustics (when using a speaker system).
Related QuestionsHow long is the Bag End warranty period?
Frequently Asked QuestionsThe Neutrik Speakon NL4MP connector is a keyed, high current, four conductor device which allows both the high and low frequency signals for a bi-amped loudspeaker system to run through the same 4-conductor cable. Bag End uses pin 1+ and pin 1- for connection to subwoofers. Pin 2+ and pin 2- are used for mid/high loudspeakers. All four conductors on both Speakon connectors are wired in parallel, but only two conductors are connected to the driver(s) in the enclosure.
Related QuestionsCan the crossover point of a Bag End INFRA system be changed?
Frequently Asked QuestionsNo. The crossover point cannot be changed since it depends on the resonant point of the INFRA subwoofer system. The INFRA processors allow altering the hi pass filter frequency by changing plug-in resistors inside the units of the INFRA-M and INFRA-M2. However, this does not change the true crossover point of the system and will, in fact, create either a gap or an overlap in the frequency response of the bi-amplified system depending on the filter frequency chosen.
Related QuestionsHow do I determine which Bag End processor is right for my application?
Frequently Asked QuestionsThere are two INFRA processors to choose from: the INFRA-M and the INFRA-M2. The INFRA-M is designed for stereo 2-way operation with a mono sum INFRA low frequency output. It has balanced XLR inputs, unbalanced XLR outputs and operates down to 18 Hz. It provides rotary controls for the INFRA low frequency output level and Dynamic Filter threshold level. It is designed for musical instrument systems, theaters and cinemas, recording studios, and home theater/stereo systems.
Related QuestionsWhat is Dolby Digital 5.1?
Arlinktech2007This is a six-channel surround sound system found on many DVDs, sending discrete audio information to speakers at front left/right, surround left/right, centre and the subwoofer.
Related QuestionsDVDWorldUSA.comMost DVDs have a Dolby Digital sound track as standard. The most common 5.1 which means it has 5 separate and discreet sound channels and one channel for the low level or bass effects. Dolby Digital is also available in 6.1, also know as Dolby Digital EX as well as mono, stereo and surround.Related Questions
What is Dolby Digital Surround?
PlayUSA.com: DVDsInitially known as simply Dolby Surround, this is an audio mixing technique that bolts on a rear channel and a centre channel onto a standard two-channel signal. With a two speaker sound system, these extra channels will be automatically mixed into the audio streams for the left and right speaker
Related QuestionsDVD HorrorThis is an audio mixing technique that bolts on a rear channel and a centre channel onto a standard two-channel signal. With a two speaker sound system, these extra channels will be automatically mixed into the audio streams for the left and right speakerRelated Questions
Sherwood Europe | FAQDolby Digital Surround EX provides a third surround channel on Dolby Digital movie soundtracks. The third surround channel can be decoded at the home viewer's option for playback over surround speakers located behind the seating area, while the left and right surround channels are reproduced by surround speakers to the sides. To maintain compatibility, the back surround channel is matrix-encoded onto (or from!) the left and right surround channels of an otherwise conventional 5.Related Questions
I lent my Bag End loudspeaker to a friend and he blew it? How do I get it repaired?
Frequently Asked QuestionsDetermine the extent of the damage and what caused it. Locate the model number and serial number on the jackplate of the unit. Call Bag End Service Manager at (847) 382-4550. You will be issued a Return Authorization number and instructed on packaging and shipment to our Service Department. Please include a copy of your receipt and any additional information about repairing the product when shipping.
Related QuestionsI find 4.1, 5.1, and 6.1 surround sound Dolby DD, DTS, and AC3 to be confusing. How is it set up?
Lowyat.NET -> FAQ for Edifier SpeakersA:Your PC or Mac will need to be equipped with a 3rd party 5.1 surround sound card to be fully functional. You may use a 4.1 surround card, or a 2 channel sound card for basic functionality. Simply attach your PC or Mac with an optical output to the Edifier S2.1, S5.1 and S5.1M via RCA cables or optical cable in the case of the S2.1D model. If your PC or Mac supports Dolby Digital 5.1 or DTS, the Edifier S5.1 and S5.1M will allow you to enjoy surround sound.
Related QuestionsWhat are the PS2 games in the market that support 5.1 ch. surround sound?
support-sw-faq | PlayStation.com (Asia) | SingaporeGames like Metal Gear Solid 2, Final Fantasy X and ~zero~ all support 5.1 ch. To gamers who enjoy high quality sound, try them out!
Related QuestionsKaleidescape - FAQ (Frequently Asked Questions)No, the HDMI outputs on the Kaleidescape Players carry video and PCM stereo audio only. When using HDMI for video, you can use digital coaxial, digital optical, or analog stereo outputs for audio.Related Questions
Do all videos use Dolby Digital (AC-3)? Do they all have 5.1 channels?
Hier finden Sie die aktuellen Infos zur DVD TechnologieMost DVD-Video discs contain Dolby Digital soundtracks. However, it's not required. Some discs, especially those containing only audio, have PCM tracks. It's also possible for a 625/50 (PAL) disc to contain only MPEG audio, but so far MPEG audio is not widely used. Don't assume that the "Dolby Digital" label is a guarantee of 5.1 channels. A Dolby Digital soundtrack can be mono, dual mono, stereo, Dolby Surround stereo, etc.
Related QuestionsWhat is the difference between AC-3 and 5.1 Digital Sound?
IndianWatchdog.com Your Source for information on piracy and...One of the technical specifications of DVD states that every disc must use at least one PCM or Dolby Digital soundtrack to ensure the medium's high quality throughout all its publications. Dolby Digital is a sound format that allows to have up to six different channels of sound, making for a full surround experience of your movies. One of the most common used versions of Dolby Digital is its 5.1 channel implementation.
Related Questions