If DBAN does not detect a SATA controller running in native mode, then run the controller setup program and enable the "legacy PATA support" option. (ie: "Push <F2> to enter setup" when the computer starts.) SATA drivers for new computers will be added to DBAN as they are published for Linux. Drivers for Microsoft Windows are incompatible with DBAN and cannot be added to DBAN.

I will not issue a statement of conformity to you because I consider it a kind of warranty or promise. If you need a statement of conformance, then you must buy an EBAN contract. If, however, you find a deviation or can suggest some way to improve the conformity of DBAN, then the software will be enhanced appropriately.

This is a recurring problem that was partially fixed in the dban-1.0.3 release and should be fully fixed in the dban-1.0.4 release. A hardware sample has been donated.

Yes! I've no idea where the misconception that there isn't came from; my development system uses SATA drives.

DBAN does not yet have a good driver for your motherboard chipset. Wait for the next release or provide a hardware sample. Most vendors that are using the HPA have a toggle for it in the BIOS setup program. Future releases of DBAN may override or dishonor the HPA.

DBAN is the acronym for DataBase of Assigned Names. The DBAN is the database maintained by the ccTLD "it" Registry where all data regarding domain names assigned under ccTLD "it" is kept (section 4.1 Regulations).

Cabling is the same for both SAS and SATA, but SAS data is streamed across the 4x lanes where SATA is still treating the 4x lanes as 4x individual lanes

DBAN has been run on a computer with 100 SCSI hard disks. There are no artificial limits in DBAN, but bus bandwidth is usually a limiting factor in practical application. The actual maximum device count is limited by the number of bits allocated for major device numbers in the kernel, which can be changed.

You must reinstall drivers for this hardware after reinstalling the operating system. These drivers were factory installed, but they may not be on the Microsoft Windows installation or rescue media. All major computer manufacturers provide drivers for Microsoft Windows on their web sites.

The Serial ATA (SATA) interface represents a great advance in storage technology. The requirement for faster data throughput has evolved with applications like digital video creation, editing & production. Serial ATA is the evolution of the ATA hard drive interface from parallel architecture to serial. Advancements to the interface encompass greater speed, more efficient cabling and advanced features for integration into servers and networked storage environments.

The RDX USB device requires Mass Storage support, and support for USB 2.0 is recommended for maximum performance. Support for these features was available starting with Linux kernel 2.4.22. All Linux 2.6 kernels should support USB Mass Storage and USB 2.0. The RDX SATA device requires support for SATA ATAPI devices. SATA ATAPI support is available and enabled by default on distributions based on kernels 2.6.16 and later.

Yes, DBAN can be started with Hans Lermen's LOADLIN.EXE program. DBAN can also be started with programs like SysLinux and Grub. Copy the kernel.bzi and initrd.gz files from the DBAN floppy disk to a DOS filesystem and run this command: You can put this command in the AUTOEXEC.BAT file. Do not change the forward-slash characters to back-slash characters. Note that DBAN cannot return to DOS. Run the BIOS setup program and put the floppy drive and ROM drive first in the boot order.

DBAN will still work properly if your BIOS does not detect all of the hard disks in your computer, or if your BIOS has disk size limitations. The BIOS need only be capable of starting DBAN from the boot media.

DBAN may fail to detect a hard disk in a computer with many hard disks. You must check whether DBAN actually detected all hard disks in a computer. Your hardware caches writes or otherwise does not implement a functional write barrier. This is likely to happen with battery-backed large-memory RAID controllers or defective hard disks.

If you rebrand DBAN without my permission, then I will send an unadulterated copy of DBAN to your customers and submit a GPL fulfilment demand to your legal department. This includes changing the product banner to "Disk Wipe" or a similarly generic name.

Note, however, that most IDE-RAID devices are not really hardware implementations. DBAN uses these devices as regular IDE controllers.

The mkisofs utility is used to generate the ISO file directly from the contents of the EXE file. The IMA file is booted from the cdrom with floppy disk emulation.

The Microsoft Windows installer will automatically create a partition and filesystem during installation. Using FDISK after running DBAN is usually unnecessary.

Advanced Technology Attachment (ATA) is a disk drive implementation that integrates the controller on the disk drive itself. Initial interface to ATA was a parallel interface called Parallel ATA or PATA. Serial ATA or SATA is an evolution of the PATA and is a serial link -- a single cable with a minimum of four wires creates a point-to-point connection between devices. Transfer rates for Serial ATA begin at 150MBps. Future rates have been planned for up to 600MBps.

The Microsoft Windows installation media that you are using only has ATA-5 support, which has a 128 gigabyte limit. The operating system installer must have ATA-6 support to use all of a disk that is larger than 128 gigabytes. The solution is to reinstall with Windows 2000 SP4 media or Windows XP SP1 media. If you do not have recent Microsoft Windows media, then research a "windows slipstream install" for instructions about how to create it.

Local CCFC volunteer Chapters hold education meetings and other events. In a few cases, they have been authorized to offer support group services led by trained facilitators. Click here to find the Chapter nearest you. Many community hospitals offer support services to patients. We recommend that you consult with your physician and local hospital on the availability of various services.

The Foundation sponsors volunteer support groups all over the world as well as telephone support contacts. These groups offer people with alopecia areata a chance to share feelings, experiences, and solutions to coping with the disease. Each group has a leader who has alopecia areata or is closely associated with someone who does. Support groups further the Foundation's goal of research, emotional support, and public awareness.

Flexibility to customize network architectures and routing schemes, introduce new carrier network data, and emulate the effects of emerging technologies

Wherever feasible, we comply with industry standards. The platform has been certified by UL, FCC Class A/B, and CE. SNMP is used for OAM functions.

GROWW provides support on a number of different levels. A proprietary web site link to a variety of other support resources for additional complementary support. The Website also provides gateways to organizations or agencies which may provide assistance to the bereaved, such as the Social Security Administration, or local medical or hospice associations.

Yes. You can run xscanimage, the front end to SANE (Scanner Access Now Easy), either as a GIMP extension or in stand-alone mode. This supports Mustek and HP flatbed scanners, as well as the Connectix color QuickCam camera.

The focus is on the data format; HTTP/HTTPS is not required as a transport protocol. As long as a publisher's feed files and their dependencies (such as enclosures) can be transported to subscriber (for example, through a store-and-forward relay), any protocol will work.

A lot! Almost all variants of TCP, several forms of multicast, wired networking, several ad hoc routing protocols and propagation models (but not cellular phones), data diffusion, satellite, and other stuff. See the documentation (described above) for details, or download ns and look.

In general, any modern Unix-compatible platform should be able to run PostgreSQL. The platforms that had received explicit testing at the time of release are listed in the installation instructions. PostgreSQL also runs natively on Microsoft Windows NT-based operating systems like Win2000, WinXP, and Win2003. A prepackaged installer is available at http://pgfoundry.org/projects/pginstaller. MSDOS-based versions of Windows (Win95, Win98, WinMe) can run PostgreSQL using Cygwin.