The modem itself can only be connected to a single device. However, the modem can be connected to almost any cable/dsl router to support multiple PC's or a home network.

Yes, if using a router. VoiceWing is compatible with most home networking systems available at retail stores.

We do offer this service to home users that work for any of our corporate clients. Unfortunately we do not offer a "Home User" support or installation service to any non corporate clients.

The wireless modem should be carefully unpacked from the box. Plug the power cable into the modem and subsequently into the power supply. Plug the RJ45 cable that is provided into the modem and then into the Network Card in your personal computer. Power (ON) the modem and the PC. Once PC and the wireless modem are on, just simply click on the Internet Browser and Start enjoying your surfing at high speed.

Yes. Modest amount of remote dial-in access is available free of charge to members of the Whitman community through Whitman's pool of thirty-two 33.6kbps modems. To connect to modem, you must first request a remote access account via a web-based request form at https://secureserver.whitman.edu/dialin/. To ensure fair access to this limited resource, remote connections are limited to 4 hours per session and a maximum of 8 hours per day.

Yes, if using a router. VOIPland Broadband Phone is compatible with most home networking systems available at computer retail stores.

Anyone can set up a wireless network in their home so they can go online around the house ? it simply means you can access the internet without wires. You will need a wireless router (some providers, including Be offer free or reduced cost wireless routers with some packages). If you set up a wireless network in your home you should ensure you have adequate security so people in the local area cannot access your network.

There are settings on your router, which allow you to protect your Internet connection from being hijacked. You should refer to the manual of the router for specific direction on how to do so and of course changing the default router password is a must. The most common way to secure a wireless connection is to use WEP ? which is an encryption and requires a key to access the wireless network. You could also try installing lead walls around the house (not recommended).

The network or wireless PC Card provided with the Air2Data kit is called a PCMCIA Card or PC Card. Almost all laptops have one or more PC Card slots. Some laptop manufacturers place a plastic cover over these slots. Often you must remove the plastic cover by using the adjacent eject button or latch. We have provided a picture of a few different styles under our Troubleshooting Guide below.

You can also make the VoicePal??? service work with any phone - Office, Mobile, Home, etc. with our GlobalVoiceLink???. In addition. You can receive calls with the VoicePal??? service on any phone in the world with our Global Call Forwarding feature.

The embedded RIM wireless modem functions on the 900 MHz Mobitex data network. Mobitex is a packet-switched, narrow-band PCS network, designed for wide-area wireless data communications. It delivers extensive coverage and in-building penetration, seamless roaming, fast messaging, high reliability and advanced messaging services. Mobitex networks are operated by service providers such as BellSouth Wireless Data in the United States and RogersTM AT&T? Wireless in Canada.

Most 802.11b and 802.11g wireless network cards will work with the Phoenix campus wireless network if you are using Windows XP. If you are using Windows 2000 or another operating system such as Linux or Mac, you will need a special driver and configuration application from the manufacturer of your wireless network card that supports the encryption level and authentication methods being used with the wireless access points.

Limit the number of DHCP addresses to the number of wireless access points that you will be using. Optionally, set static IP addresses, set to non-standard network blocks. Consider using VPN, SSL, Firewalls, RADIUS, Kerberos or other access control, or end-to-end encryption. Most of these can be integrated into your 802.11b appliance.

A firewall will help protect a computer on a wireless network, but will not restrict access to the network itself. You should configure your wireless network to use a network key using either Wi-Fi Protected Access (WPA) or wired equivalent privacy (WEP). For more information, see How to keep others from hijacking your home wireless network or consult the manual for your wireless networking devices.

The campus wireless network can handle hundreds of users logged in at any one time, but the more active users, the slower the network becomes. On average, one access point can handle approximately 30 users without a noticeable degradation in performance.

Yes. You may connect your Waterford WISP high speed internet service to either an existing or a new in-home network. We can advise you on what equipment to get, if you would like to install an-in-home network. We can also help with the installation, if desired.

Yes, it is possible to have wireless connectivity at your home or office, but specific equipment is required. We recommend that you consult our technical support staff before buying any wireless equipment.

Yes, and you have several options. Of course, you can make a wired connection between your RBX1600 ethernet jack and a wireless hub. This is the simplest and quickest way to use the RBX1600 in a wireless environment. If that configuration is not possible for some reason, we recommend using an ethernet bridge, which simply plugs into your ethernet port and has it's own WiFi antenna. The RBX1600 has a compact flash (CF) slot that can be used for a wide variety of applications, including 802.

The term is loosely used to refer to the same type of technology and they are often interchangeable. Wifi refers more to the actual technology used and transportation of the data, the network end of things is used to refer to setting up access points and the like. Home networks are just a smaller scale network set up for home use.

This depends on how your company's network is provisioned. Each network is different, and we suggest that you discuss your needs with your company's network administrator or IT department. The Choice OnLine service currently provides dynamically registered IP addresses. That means it may be difficult to reach your home computer at the same "address" since the address may change from day to day.

No. CompData requires a modem on one of the workstations. One workstation will do the transmissions for all CompData users. No. Transmissions only need to be done once or twice a day. At all other times, the workstation can be used for any other purpose.

Unwired is portable, so you can move your Unwired Modem and obtain a wireless internet connection virtually everywhere within the Sydney coverage area*. However as it is not a mobile service, your computer must be stationary while you are online. This means that you cannot use the Unwired service while travelling in a car as your connection may fail.

A series of antennas and wireless access points will be distributed throughout the town limits on towers, light poles, and various other existing structures. These antennas and access points form a wireless virtual umbrella covering the town that will allow anyone under the umbrella to access the Internet via a wireless connection (laptops, PDAs, desktop computers with WiFi cards, etc). For more technical gibberish, the network will be carrying three different frequencies. The 5.

Yes. Our High-Speed Wireless Internet Access can be fully integrated into your network. The antenna is connected to your network via a standard Category 5 network cable. Therefore, we can connect the antenna directly into a single computer, router, or a firewall.

Yes. PrintJobs can be installed on multiple computers and link to a single database over your network. Each computer will need to have PrintJobs installed and a purchased license. We will assist you in setting up your PrintJobs network.

No, In Loco Parentis currently sends alerts and logs via email but you can only access the detailed reports from the machine being monitored. Please check your spam or junk mail folder as it may not have recognised ILP's email address. Please add support@ilp4parents.com to your contacts or address book and you will receive your emails in future. Check you have entered your password correctly as ILP is case-sensitive.

In a Microsoft Windows computer you can check to see if you have a network adapter installed in your computer by going to the Control Panel and clicking the "Network Control" application. If an Ethernet, HomePNA, or 802.11b wireless adapter is listed, it can be used to connect to your network. On a Macintosh computer go to the Control Panel and select "TCP/IP". Use the "Connect via:" pull-down menu to see if an Ethernet, HomePNA (ex. 2Wire PC Port), or 802.

Yes, if you are using a multi-PC modem (a modem with integrated NAT), you can connect the VoiceFinder without problems to one of the LAN ports of your multi-PC modem.