What wood finish would you recommend?
Koski Log Homes, Handcrafted by Jerry Koski of Ontonagon, Mi...We recommend Sikkens wood finish inside and out on the logs. We have tested many products and found Sikkens to be the best. On the outside, it needs to be applied every four to five years. For your convnience, we are also a dealer of Sikkens wood finish.
Related QuestionsIs the wood treated with anything? Can you recommend a protective finish?
Frequently Asked Questions - Raised Garden Bed Kits - Natura...The wood is untreated, kiln-dried Port-Orford cedar. Applying a finish is completely optional, and most people choose not to, relying instead on cedar's natural rot-resistance. You can, however, preserve the appearance and extend the life of your raised beds using a nontoxic finish.
Related QuestionsWhen should UV GUARD Exterior Wood Finish be applied?
Weatherall Company, Inc. - FAQs (Frequently Asked Questions)On new homes the two coats of colored stain should be applied immediately after the roof is on, the windows have been installed and the logs cleaned prior to any chinking, if it is a chink style home, to prevent coloring the chinking. The clear top coat and subsequent clear maintenance coats can be applied later.
Related QuestionsWhat finish do you recommend?
Mountain Timber Products - double tongue and groove log home...When construction is complete, most builders will want to apply a finish to the raw timbers. The finish can help protect the wood from the damage caused by insects, fungi, dampness or intense sun. Finishes also can stain the wood to the tone you like best. We recommend a three-part finish by SASHCO that combines a layer of insecticide/fungicide and a layer of stain, with a protective top layer. This system allows you to refresh the top layer as needed without adding multiple layers of stain.
Related QuestionsWhy should I finish my wood?
Exterior Wood CareSome people wonder why wood should be finished at all. After all, some wooden structures have lasted hundreds of years. This is true, but not all wooden structures will last hundreds of years. Weather and the wood itself can develop rot and deteriorate to the point of collapse. Another thing to consider is appearance. If you think natural wood will retain its color, you are wrong. Sunlight turns all woods yellowish or brownish, then gray.
Related QuestionsFrequently asked questions about MAR-K truck partsNo, MAR-K oak bed wood is grooved, sanded, cut-to-size and ready for you to finish. MAR-K pine bed wood is grooved, planed, cut-to-size and ready for you to sand and finish. For suggestions on how to finish your bed wood click here. Or see our wood finishing tests for information on different finishes.Related Questions
What if I want actual samples of the iron or wood finish?
Frequently Asked Questions about buying from Carolina Rustic...We get hundreds of requests for finish samples for customers who would like to "touch and feel" before they make their purchase. Unfortunately, it is not possible for us to mail out actual physical samples to all those who desire them. In many cases, our suppliers simply do not make samples, as the digital photography they use is very accurate.
Related QuestionsHow Should I Care for My Piano's Wood Finish?
niceusedpianos.com nice used pianos used piano pianos used p...with any piece of furniture, keeping drinks off finished wood surfaces is a simple rule always to follow. New piano finishes generally require only occasional cleaning with either a dry or damp cotton cloth. Older piano finishes may benefit from an occasional polishing with a good quality polish, but frequent polishing is not recommended.
Related QuestionsWHAT FINISH IS THE BEST FOR MY WOOD FLOORS?
FAQ'sThe finishes on the market today are all good finishes, however, your life style and specific needs may dictate the best finish for you. Consult your wood flooring professional for recoats. Use finish products designed for hardwood floors. Use manufacturer's recommendation for proper amount.
Related QuestionsCan I get a wood finish sample?
Hooker FurnitureA: Yes, you can on many, but not all of our products. Contact your local authorized Hooker Furniture dealer and ask them to order a wood finish sample for you. You can find a listing of the Hooker dealers nearest you by going to the "Find a Dealer" section on the home page of this Website. Another alternative is to contact our consumer help desk for a finish sample.
Related QuestionsTop Can you send me samples of your wood/finish?
Solid Wood TV Furniture - Stands, Consoles, Credenzas for Pl...You can order wood/finish samples by click here. Please keep in mind that every tree is unique in grain appearance and stain absorption, so a given sample will not necessarily exactly match the furniture piece you will receive.
Related QuestionsCan you match the wood and finish on a piece I already have?
Frequently Asked Questions - The SHC Craft - Swartzendruber ...No problem. Send us a sample shelf or drawer. We will verify the wood species, then send you a matching sample for your approval. If you have a really unique finish, or want a perfect match, we can also create a custom stain match. Custom finish matches start at $300.00
Related QuestionsWhat wood colors do you recommend?
Creative Wood Crafters Inc.You will probably want to select a wood tone closest to the one already in your unit. You may want to consider that lighter wood colors don't show the nicks and scuffs as readily as darker wood tones.
Related QuestionsWhat species of wood do you recommend?
FAQWe can utilize most any species that is suitable for structural purposes. However, we often use Douglas Fir because it combines beauty and structural strength comparable to many favorite hardwoods without the shrinkage and weight issues.
Related QuestionsWHAT KIND OF WOOD DO YOU USE AND WHY DO YOU RECOMMEND IT?
King of SwingsAll playsets are made of Grade #1, Kiln-Dried, A.C.Q. pressure-treated to ground-contact specifications southern yellow pine. This is the type of pressure-treated pine recommended by both the Environmental Protection Agency and the Consumer Products Safety Commission for public playground use. It is also endorsed by the American Council on Safety and Health and the American Wood Preservers Institute.
Related QuestionsWhat type of wood do we recommend?
FAQOur customers use just about every kind of wood imaginable. There is not a right or wrong type of wood. We do use Birch, Maple, and Walnut for our prototype models that you see in the catalog, and web site pictures.
Related QuestionsWhat do you recommend to protect the wood?
FAQS: Deck Building with Kwikdek DeckingWe recommend retreating KwikDek with teak oil, boiled linseed oil, or other penetrating wood preservative products available
Related QuestionsWhy do you recommend the Lacquer finish?
Frequently Asked Questions about our Bunk Beds and Loft BedsWe recommend lacquer because it is the best finish we have found for our products. The lacquer protects the wood from moisture, and at the same time penetrates into the surface, bringing out the natural beauty of the wood...lacquer makes the wood "come alive" (not to sound too corny, but it's true). The lacquer also provides a semi-glossy surface that is easy to clean, and looks great.
Related QuestionsWhat is the best finish for bed wood?
Frequently asked questions about MAR-K truck partsSee our wood finishing tests for information on different finishes. The black painted wood, in our testing, seems to hold up the best under continuous outdoor exposure. Failure of the finish ususally occurs first at a sharp edge of the board or at the ends. Two hints: Round over all the sharp edges of the wood to at least 1/16" radius and more if you can. This will keep the coating from becoming thin on these areas.
Related QuestionsDoes the wood frame have a surface finish?
College Bed Lofts ? $189No, our lofts are made from unfinished softwood construction grade dimensional lumber, 2x4, 2x6, plywood, the safety rail and bookshelf are made from MDF. For staining the loft, we recommend using Minwax PolyShades all-in-one stain and polyurethane finish, it does a real nice job on all the pine boards including the MDF pieces. You are free to customize it any way you prefer. Many students paint them before bringing it to college.
Related QuestionsLoftworks, LLC Frequently Asked QuestionsCan I pick up the loft frame directly from Loftworks, LLC? Yes, the loft/bunk frames will be ready for pick up at Loftworks in west Madison, WI. Call (608)833-6592 prior to pick up.Related Questions
How long do I have to finish my wood windows (Majesty)?
Frequently Asked QuestionsMajesty Wood Windows must be finished with stain, polyurethane, or paint within 48 hours of installation*. Warranty: All exposed wood must be properly sealed within 48 hours upon installation. Harvey Industries will not be responsible for water staining, discoloration, etc. resulting from condensation or moisture that takes place before units are finished on the interior. Please refer to the actual warranty for Exclusions and Limitations.
Related QuestionsWhere is the finish?
Great Race of Agoura Hills -- Agoura Hills -- FAQ : Frequent...All races share the same finish in beautiful Chumash Park. Look for the large red arch. All races finish on the grass. For spectators, the last tenth of a mile is highly visible from many locations in the park.
Related QuestionsCan PENOFIN wood finish be applied over another wood stain?
Penofin Wood Finish FAQNo, not without proper surface preparation. Recommendation is to clean surface and remove previous finish, usually by use of a pressure washer or sanding.
Related QuestionsHow can I tell if the wood is too hot to apply PENOFIN wood finish?
Penofin Wood Finish FAQIf the surface is hot to the touch it is probably too hot to apply PENOFIN wood finish. Do not apply PENOFIN wood finish in direct sunlight. Product can flash and dry on the surface without penetrating.
Related QuestionsWhich of your products would you recommend for penetrating extremely weathered and neglected wood?
FAQs Frequently Asked QuestionsCabot Decking Stain is an extremely durable stain for use on all types of wood decking. This stain brings out the full beauty of the wood grain and provides deep-penetrating wood protection. It is water-repellent and will resist cracking, peeling and blistering and gives a mildew resistant coating. For a solid white appearance on your new deck we would recommend using Cabot Solid Color Decking Stains.
Related QuestionsWhat do you recommend for helping the wood posts last longer?
Fence-All - FAQ for Wood FencesUpgrading to steel posts was a somewhat popular option in the past but always had inherent problems (steel promotes rot in the wood). Now we are able to offer PVC posts, with a lifetime warrantee against rot, that will fit almost any wood fence style.
Related QuestionsWhat pads do you recommend for applying this finish?
Floor Finish FAQWe recommend the synthetic white or off-white pads for application of the Floor Finish. Most other floor finish pads will work, but should be tested in small areas first to ensure smooth, level application.
Related QuestionsWhat type of finish do you recommend to use on the models?
FAQWe like to use a clear lacquer. A product by Deft is very good finish that can be sprayed on the model. It is a water based finish which dries very quickly, allowing several very light coats to be applied, rather than heavy coats. We also have many customers who paint the models.
Related QuestionsI want a shiny finish. Can I put multiple coats of UV Plus for Pressure Treated Wood on the wood?
Messmer's Inc. UV Plus for Pressure Treated Wood - Premium w...No. The only way to get a shiny surface on the wood is by using a multiple coat, film forming finish. We don't recommend clear film forming finishes on decks because they are slippery when wet, they will eventually peel, and they are difficult to maintain and recoat. When properly applied, a penetrating finish like UV Plus for Pressure Treated Wood will not be shiny, it will have a natural, matte look. For a glossy or satin appearance on vertical surfaces, we recommend our Timberflex products.
Related Questions