ITS's networking group does all new port installations and activations. Please call ITS at 962-HELP or open up a ticket at http://help.unc.edu. You will need the following information: building name, floor, room and port number(s).

Yes! Every room has free broadband internet and is connected to the computer room and laser printer, as well as to anyone who wants to share files or run iTunes.

The wireless modem connects to your computer via an Ethernet Port. The Ethernet port is located at the back of your computer If you do not have an ethernet port there are other options. Call you nearest reseller.

Tell your departmental support person who will then contact Room Scheduling. Classes over the room capacity are in violation of fire code and need to be moved immediately.

Yes, you will have to register twice: once for the wired Ethernet connection and once for the wireless connection.

The wireless modem connects to your computer via a USB or Ethernet Port. You need to check which of these you have free on your computer before you order your Unwired modem. These ports are usually located at the back of the computer. You can find pictures of these on the System Requirements section of the Unwired website. Your computer's USB port allows you to connect external devices (such as printers, digital cameras, etc) to your computer.

External adaptors are available for both desktop and laptop computers which connect to either a USB port or PCMCIA card slot.

The WLA660's Ethernet port (RJ-45 jack) supports 10 Mbps over a 10Base-T connection (half-duplex only).

You have several options. You can purchase a Network Interface Card (NIC) at any computer supply store. This will require a physical installation of the card into your computer. Or you can purchase a USB-Ethernet adaptor which converts a USB port on your computer into an Ethernet port. We have USB-Ethernet adaptors in stock for purchase and delivery with your modem.

Either one will work with the cable modem and service Wave provides. However, not all computer systems allow for a USB installation. Before your Internet installation, you must have a computer with a USB port, or have a 10 Base T Ethernet card installed in your computer.

No, most ports are activated before students move in. However, if you believe yours is not, please contact us.

Yes. If your SIXNET EtherTRAK Ethernet I/O module is connected to a network with Internet access, then you can access it from any where in the world just by specifying it’s IP address.

Add an HP J3231A Remote 2C/HP Internet Router Bundle to your workgroup. This product has a 10Base-T port that will connect to the Switch Link port on the Hub-12txm or Hub-12tx.

Residence Halls are wired with high-speed connections to the University network and the Internet. Each room is equipped with voice and data connections. For an Internet Connection, you will need: A computer capable of networking. Typically any computer purchased new that was configured at the factory (such as a Dell or a Gateway or an Apple, etc.) since 2004 will have this capability.

You can connect your Wii to the Internet through wired Ethernet with the USB to Ethernet adapter. Click here for detailed instructions.

When ETH connector (green) = ON, good receive/transmit on the Ethernet port. When ETH connector (orange) = ON, good physical connection to Ethernet segment.

On the SU that you want to deny customer access to, turn on IP filtering, and simply filter out the address or subnet that the customer is using. Configure the "User Defined IP Address" table to an IP range that is not in the range or subnet that the customer is using. When configuration changes seemingly by itself, this indicates there is a hardware problem with the unit. If warranty still applies, contact Alvarion tech support to RMA the unit.

A. The Targus USB Mobile Port Replicator with Ethernet is the world’s smallest expansion hub that provides instant peripheral device attachment and Ethernet via a single USB connection to Windows 98/ME/2000 based computers. Packaged in a small and attractive enclosure, the PA090U can fit any place on a desktop space. Add devices like mice, keyboards, joysticks, network, printers, PDAs, scanners, speakers, cameras, telephones and many more without rebooting your computer.

Please note: It is usually a bad idea to force the speed of an interface. If possible, leave in Auto-negotiate mode. Contact support@candelatech.com if you have questions. LANforge supports setting the ethernet port speeds through the GUI and CLI. The CLI Scripts page offers the lf_verify.pl script that has an example of setting the port speeds through the CLI. Information on how to set it through the GUI can be found in this section of the LANforge GUI Users Guide.

Unfortunately, this switch is defective. Please go replace you switch ASAP with your Vendor. If you have this switch over 30 days, then please E-mail rma@gigafast.com for future instructions.

Some DSL modems carry USB capability. This is useful alternative in instances where a network card cannot be installed. Please note that you cannot use the USB port of a usb HUB to extend the wire length between your modem and PC, or share the access to multiple systems. You can use the USB and Ethernet ports at the same time to facilitate access on two machines provided the advanced modem routing features are enabled.

The @PORT Dish is mounted on a motorized 3 axis computer controlled platform... One button selection from your PC initiates an automatic search and peak to lock onto the Satellite. Ready to surf the internet!

The nForce3 motherboard doesn't support GAME/MPU401 function. If you prefer to use a joystick, please choose one with an USB interface for connection with nForce3 motherboard. Please choose the UDMA setting in BIOS as "Enabled". Also select the "Hard Disk controller" DMA option in device manager to be "On". The system performance will then be optimized.

Carbon is an extremely porous material that attracts and holds a wide range of harmful contaminants. Activated carbon is carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the contaminants are drawn to the surface of the carbon granules.

Activated charcoal binds to certain poisons to minimize absorption of the poison. The poison is then eliminated through bowel movements. Activated charcoal is a gritty, unflavored substance. This can make it difficult to administer. Activated charcoal can be administered through a nasogastric (NG) tube, a tube inserted through the nose to the stomach. No, not at this time. Activated charcoal is difficult to administer because of it palatability. Therefore, patient compliance is a problem.

It's a protocol for by many local networks, (LAN Local-area Networks) the origins of which came from Bob Metcalfe's Harvard's dissertation on "Packet Networks".