Most times, no. Most existing floors can remain in place and have new floors installed right over top of them.

Absolutely! As long as the existing floor is level, you can lay a new floor over the top. However bare in mind that the new floor installed will raise from 12mm to 19mm depending on the thickness of the floor you choose to have installed.

It is better to remove the existing vinyl, but if it does not cause a transition problem from one floor to the next and/or if it does not cause a problem with the installation or removal of appliances and doors then it can be done. Keep in mind though that you may want to remove and raise your base boards so they have the proper reveal.

No you can not, unless of cause you first install a layer of black polythene with taped joints using moisture resistant tape to the total floor area prior to installing underlay. This method of installation is suitable for concrete floors that test between 75% - 80%rh. Ask your installer to advise the best option for your project. You can visit our "Find a Professional" page for contact details of a professional in your area.

Bob, if you won the lottery what would you do to your home? (From your friends at the Remedy Building)

That's almost a judgement call on your part. If you live in a hot climate, the roof would be better. If you live in a cold climate, the attic floor would be better. But there are a couple of factors to consider. If you install No-Tear on the roof, you also need to cover the gable ends (that's the part that looks like a big triangle). If you live in a cold climate, installing it on the attic floor will also reduce winter heat loss (see "What if I can't get the best air gap?").

Carolina Flooring Specialists has it's own installers. We don't sub out the work to contractors you've never met. The best part...one of the owners of Carolina Flooring Specialists is on every job ensuring you complete satisfaction. "We don't send guys...we bring them!"

If your original vinyl floor was installed using a full spread adhesive method, then you can apply an embossing leveler to the original vinyl to smooth it out and then install the new vinyl.

Yes and no. Is the vinyl flooring is tightly secured to the subfloor? Does the vinyl flooring have a thick cushion attached? If the vinyl floor is thin and well secured to the subfloor you may be able to float a wood floor over it. In some situations you may be able nail/staple a wood floor over it also. If the wood subfloor is sound you may be able to nail a solid wood floor over the top.

Yes, but the preferred method is removal. The Uniform Building Code allows two (2) roofs on commercial (flat) buildings and three (3) roofs on residential(steep) buildings. Removal allows for inspection of the substrate, and the elimination of any wet, rough, and/or unstable existing materials.

Yes. We can supply a DIY Installation Pack, including self-adjusting legs and black or white kickboards, from $120. We recommend wearing wear safety glasses, covered footwear and gloves. Use a registered plumber and electrician to install and connect appliances and sinks. Please refer to condition 12 on the Terms and Condition page for further information

Depending upon the scope of the project, you may want to consider Heartwood Kitchens as your general contractor. Our installers specialize in the installation of cabinetry, as well as other aspects of finished carpentry. Our years of experience working with electricians, plumbers, and related trades ensures a smooth, professional process.

You need to obtain approval first. You make your application by submitting the application form (Form VC). If approval is granted, it will be subject to the conditions as stated in paragraph 4 above.

Unfortunately not. The installation of tile heating can only be done before the tiles are laid. If however you have purchased a new existing home without tile heating, you can have a carpet heater installed under a loose lay rug to negate the problem.

Different jurisdictions have different code regulations but generally speaking, Enviroshake® can be installed over one layer of existing asphalt shingles, provided the roof is structurally sound underneath. There is considerable cost savings since there would be no additional cost for removal and disposal of the shingles. There are considerable environmental benefits to this as well because the old shingles need not be put in a landfill. No.

Great care should be taken before painting previous 'furniture' finishes, due to the high likelihood that silicone waxes and cleaners have been used on these surfaces. The presence of silicone can be expected to interfere with the ability of a wooden substrate to properly accept a paint finish. Silicone is present in most of the popular household waxes sold in the US Wood surfaces should be well abraded with a 150-grit paper to break up any existing finish, and then tacked clean.

Yes, subject to free survey, we can supply & install freestanding or integrated dishwashers, fridges, fridge freezers, washing machines etc.

Yes. Our price quote includes the installation charge. There is no delivery charge for furniture delivered within 25 miles of our shop, but any cabinetry requiring installation will incur a delivery fee.

It takes approximately 8 to 10 days for the manufacturing process and about 2 to 3 hours for installations at site for the basic kitchen system. Additionally around 15 days to manufacture the membrane/post from shutters and 2 to 3 days for shutter fitting. For plywood-laminated shutters with traditional carpentry, it takes about 2 to 3 days to make the shutters and do the fittings.

Not exactly. Factors such as the age and the cut of the wood affect the coloring. We will make every attempt to match the existing floor using stains and dyes. Very few repairs are discernible after the finish ages a few years.

When choosing a coating for your floor you must take into consideration the traffic in which will be entered. A polyurethane finish is the most durable and will stand up to any heavy traffic. Whereas a water base finish, although, minimal smell when applied at first, is less durable and wears a lot quicker. This particular finish is more popular in department stores and restaurants because of the minimal smell it distribute out and the time frame in which it dries.

Solid 3/4" Hardwood flooring cannot be installed below grade (below the soil line) or over concrete. When a solid product encounters moisture it reacts very negatively. Therefore, a laminate or engineered flooring must be used. Laminate flooring is constructed by fusing 4-plys of material together to form a product with unprecedented strength and durability. An engineered product is very similar with the exception that they usually have a real wood layer on top of the constructed core.

Yes, choose our clic floating cork floor and you can install directly over your existing flooring with very little surface preparation.

You first need to flatten the floor with a skim coat of a Portland cement based patching compound. Or, you can simply install a floating clic cork floor directly over the existing tile.

When installing a pre-finished floor, you need to take care in the handling and installation process. The Porta-Nailer is designed not to damage the flooring. The shoe bases are made of a non-marring material and the hammer rubber cap is made of a non-marring material to protect the pre-finished surface.

Ans) It totally depends on what material you will select. The hard surfaces are easily available. The carpet that is ordered is based on the size of the room and it will take several days to receive. It might become slight delay in installing your new floor due.

A Solid Colors and Light/Heavy Chip Floors can be installed in two days. Granitex Floors will take three days to install. Solid Color Floors have two coats; one coat of epoxy and a topcoat of polyurethane. Chip Floors have at least three coats and Granitex floors have up to five coats.

Yes, you can install just the SELinux modifications on an existing Linux system or you can install a Linux distribution that already includes SELinux support. SELinux consists of a SELinux-enabled Linux kernel, a core set of libraries and utilities, some modified userland packages, and a policy configuration. To install it on an existing Linux system that lacks SELinux support, you must have the ability to compile the software and also have other necessary system packages.

You may have a nest of Carpenter ants under your cabinets. A good start is to install one plug under your kitchen sink (in or near the toe kick), and from there, install one plug every 4' on either side of the sink cabinet. Cut approximately one-quarter inches from the bottom of the casing to prevent additional water from wicking into the trim. If the trim is setting directly on the ground or on masonry, cut approximately 1/2" from the bottom.

Stone is naturally a porous material, it needs to be treated when it is first laid. For this type of limestone we recommend the use of Lithofin Stain Stop. Once the tile has been sealed correctly with multiple applications of Stain Stop it will be completely sealed and can be maintained in the same way as a ceramic or porcelain floor. This advice also applies if you want to use stone in a bathroom. Once treated, the stone provides a waterproof barrier.