To eliminate this open your audio settings window (Playback) and mute the microphone slider by clicking on the square box next to the word "mute". This will put a check mark in the box muting your audio. It does not affect your microphone audio into the Echolink and internet. [ Top ]

Sometimes feedback can be experienced when using the microphone and speakers at the same time. Check that the microphone sensitivity is not too high or try reducing the volume level from the speakers. Additionally make sure that the microphone is not located too near to the speakers.

We recommend using a headset to ensure the great quality of audio. A headset will elliminate the voice looped back (echo) to sender. To switch your audio device, please go to "Start" => "Settings" => "Control Panel"; double click the "Sound and Audio Devices"; Select the "Audio" tab; Select your preferred device. If you headset is USB based, make sure to select the right one. If your headset is the regular model (with 2 3.

The DVR does not have a built-in speaker to playback audio. A connection from the audio output to a device with audio output is necessary to hear audio.

Loose cables or cables that are not grounded properly can cause static. Check the connections to make sure all cables are connected correctly. Also, try adjusting the input volume from the media player you are using or from the sound control panel in your system tray.

No. The Microphone and the Audio Cord are both used for the same purpose. It is only necessary to use one of the two cords to receive audio.

No, you just need a computer or laptop or even a PDA and connection to Internet. You can schedule calls using dial-up modem too! It’s that easy.

One of the keys to getting the most out of your audio investment is choosing gear that will go to work for you now, and won't become obsolete as your system grows. Most car audio amplifiers boast a design flexible enough to keep them in the game as your set-up expands. If you go with a 4-channel amplifier, powering a pair of front speakers and a subwoofer is a breeze. You'll simply want to run your amp in what we call "true" 3-channel mode.

Please make sure to turn ON the audio in the Audio preferences window, and you have the correct audio driver selected.

Check if your microphone setting is set properly. The microphone icon is displayed on the upper right side of your screen, right above the volume setting. If these don't work, it could be possible that the audio may be muted on your PC. Check to make sure your PC is not on mute mode. Or maybe the headset or microphone you are using may have a mute switch. Check to make sure your headset is switched on. If the warning message still appears, the sound card may be incompatible with CleverClasses.

Included with your rental is a PA System with a microphone. However, if previous arrangements have been made with your DJ or band â€" you can often use their system.

If your microphone has never worked, or it stopped working, first check the physical connection of the microphone. Verify that it is firmly plugged into the microphone port instead of the headphone or speaker port. If you are not sure which port is correct, you can check the sound card to see if it is marked (sometimes with a picture of a microphone), you can use a process of elimination, check the documentation that came with your hardware, or contact the hardware manufacturer.

Yes, if you have sophisticated telephony hardware such as the Way2Call Hi-Phone (as opposed to a voice modem with the UnimodemV TSP), plus TeleTools v3.7 Professional or Enterprise. Here's the explanation. TAPI supports two logical "devices": the line device -- controls the phone line, like dialing and tone generation and hanging up. The corresponding control in TeleTools is called etLine. the phone device -- controls phone features like microphones, speakers, and buttons. TeleTools 3.

Your microphone will pick up your friend’s voice that is coming through your speakers, and return it to your friend. This causes a feedback loop that in the best case is annoying and the worst case doesn’t allow the audio to transmit at all.

If it's your first time running the CleverClasses application, your audio setup will pop on your screen right after the completed download process. To check if your microphone is functioning, click on the RECORD button. Test if your microphone works by recording your own voice. Click on the STOP button when you're done. Click on the PLAY button to listen to your recording. If you are done testing your audio, click on STOP.

Recommended cable for speakers is 2-core 0.75mm speaker cable. For standard microphones it will be a 2 + 2-core screened cable however, for microphones with selectable priority or microphones with zone selection etcÉ a 4-twisted pair with overall screen will be recommended.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

Download and install the latest drivers for your sound card. These are usually available from the manufacturer's website. It could also be a conflict with the audio capabilities of your modem. You can disable the voice modem driver in Win 95’s Control Panel | Multimedia | Advanced | Audio Device | Properties | Settings. Click on "Do not use audio features of this device." Or, remove the device entirely.

You enable full duplexing in Cakewalk's Options | Audio | Advanced menu by placing a checkmark next to "Enable Simultaneous Record/Playback". If this option is not available to you, your card does not currently support full duplex operation. Get in touch with the card manufacturer for details.

WMVHD files, typically created for playback on the XBOX360, can contain a 5.1 audio stream. If you play such a file on a computer that only has two speakers then you will only hear the sound from two of the six channels. This causes for example the voices (center channel) to be almost unhearable. The solution is to downmix the 5.1 channels into 2 channels. There are two ways to do this. You can either use AC3Filter or ffdshow. In ffdshow audio decoder configuration, go to the 'Codecs' page.

The microphone is a heightened microphone that is used to make a normal conversation located in the mouth piece of the phone. Though the microphone is very sensitive there is no way to know how far can you hear, the general rule is that you can hear the same as if someone "forgot" to press the END button on the keypad.

The best way as in any ham radio application is to have your mouth about 3" away from your mouth. This way you will be able to keep the microphone sensitivity at a lower setting that will pick up your voice nicely while minimizing background modulation, e.g., people talking, television, etc. [ Top ]

kX Audio driver enables 'What you hear' recording mode by default. In order to turn it off, open the kX Mixer, and set Wave and Synth recording levels to the appropriate values on the 'Recording' page.

Some files on the site (except for our interviews) are in .Real Audio format and should run on any standard browser. I know for fact they work in Explorer 5 and later (on Mac and Windows), Netscape 4.0 and later (Mac and PC). WebTV and set top browser systems may have a problem playing them. I used to have everything as WAV files, which played on anything, but those files were big and it simply got too expensive so I made the switch in May of 2003.

When audio is captured using JavaSound capture driver, it is not automatically played back, unless you are previewing the captured audio. Sometimes, even if you are previewing the captured audio, if your capture device does not support simultaneous capture and playback, then you will not be able to hear any sound. Unless otherwise licensed, code in all technical manuals herein (including articles, FAQs, samples) is provided under this License.

It can become annoying for the driver or other front seat passengers to listen to Barney for 8 hours en route to Disneyworld. The choices for audio are: Video speaker: some screens come with a smaller speaker in the housing similar to your home TV. Since the speaker is small, the audio is lower quality and listened to by all in the car. The speaker is typically on the back of the housing so the driver hears the speaker twice as loud as those watching the screen.

Your company may have a 'firewall' to stop external data interfering with its own. You need to contact your IT department to find out.

Check that the speaker cables are properly connected.Make sure the volume settings on the Windows mixer are not muted and set properly.