To run a remote xterm program, your IP address should be a public one that can be reached from the remote host because a remote xterm tries to connect to your local PC. If your PC is located inside the firewall or NAT and the Unix host is located outside, X applications cannot connect to the Xmanager running on your PC. To obtain CDE or GNOME/KDE environment under the NAT environment using Xstart, please refer to the following FAQ:

Windows 95, 98 or NT, enable you to share files with other computers. If these computers are connected to a local area network or connected on Internet, a person can have access to your data if you did not protect the access by a password. Make sure your hard disk is protected by a password. If you do not uncheck the box which saves your password, your hard disk will be available either physically or through your network, because it will be visible in your register base.

This option enables you to connect through a host when there is no direct TCP/IP connection with the computer you want to administer, but an intermediate host computer has a direct TCP/IP connection to the target computer (gateways etc.). The Radmin server must be running on both the intermediate host computer and the target computer. Example: You have a computer on your local network that has a direct connection with the Internet.

These questions are crucial to establishing connectivity. You must be able to ping the remote machine if you want to create a Remote Desktop session. The keys are that you must have port 3389 open or forwarded and also port 80 if you are using the Remote Desktop Web Connection. If you are on a small local network, you must forward port 3389 (and 80 as well if downloading the Web applet) to the Windows XP system. If you have a router, check out some of the documents at PracticallyNetworked.

Yes, Senomix Timesheets may be used through a firewall or office Virtual Private Network. The network ports you need to clear or forward through your router are listed in the Installation Guide.

The best alternative for securely connecting a single remote user to your network is to use the Remote Desktop capability which is part of Windows XP Professional. For more information, see our ChiliBox Best Practices Guide.

For wired connections users must fill out an IP address request form for each machine they want connected to the network. You will need to enter the hardware (MAC) address for the Ethernet card being used. We use DHCP to provide IP addresses for laptops, whether it is a wireless or wired connection. We will assign static IP addresses for desktop and server machines.

Morpheus will automatically connect to the network for you. Note that when you first launch the program, it may take moment for it to find suitable peers to connect to. Please be patient and allow Morpheus to connect to your peers. If using a firewall, make sure Morpheus has permission to access the internet.

Sure. Some companies use "Virtual Private Networking" software (VPN software) to let their employees connect to their internal systems and Web sites from outside the office. EarthLink Wi-Fi is generally compatible with VPN software. Contact your company's IT department to find out if this is available to you.

Log into the machine running Qckvu. Set the DISPLAY environment variable to point to the remote machine and export it. Start Qckvu. A simple script can automate this procedure. Details ... Using draculaplt to convert Dracula plot syntax to Qckvu and xgdsplot map and pat files.. Details ...

Opera Remote makes few demands on the client hardware since processing takes place on the server. A client PC that would normally be too slow to run Opera effectively can be given a new lease of life with Opera Remote.

It is anticipated that any given institution will require the coordination of multiple services to successfully perform stipulated research. This is in addition to the internal interaction required between relevant divisions of Medicine. For example, some institutions will include participation of multiple clinical centers to gain the required number of potential participants. Others may need to work with affiliated practices or groups to assure an adequate patient participation.

you can define different local and remote editors from within Waffle, so it's simple. The STATUS command does not let you edit your local editor, however; you have to ADMIN T <you>. Prior to 1.65, you should modify /waffle/extern/_editors to run a batch file which gets passed the baud rate, and decides based on that whether to run a local or remote editor.

Yes. The Agent will continue to monitor/enforce the last policy data it received from the server. ESP allows you to apply policies to systems based on their location when connecting to the network, as well as the type of interface being used.

NAT is one of the more powerful firewalling technologies, which allows your network to utilize a single IP address. This helps your network to remain hidden from the public Internet by hiding behind the single IP address of BizGuardian. This address will be automatically allocated by your ISP if you are using BizGuardian through its DHCP client. This saves the expense of additional (or any) IP addresses being purchased from your ISP.

NAT lets organizations hide their internal IP addresses and provides a means for connecting many more computers over TCP/IP than would be possible if every computer that accessed the Internet needed its own IP address. An organization or a site within an organization that uses NAT can use almost any IP address internally for any purpose, with the exception of a few IP address ranges that are reserved for internal network use (for information about these IP ranges, see the FAQ at http://www.

NAT will not work because Helix Server must contact the Client directly on any number of randomly assigned ports. When Helix Server needs to contact a client, it opens a new port and starts a separate communication. Asynchronous communication requires this. When Helix Server needs to send a message to a Client, it looks for an open port and when it finds one, it uses it to initiate contact and send the data.

Yes. Like any router, NovaRoam routes traffic between networks. A NovaRoam can be connected to a Local Area Network (LAN) and serve as a gateway to the LAN for all other NovaRoams. To go one step further and connect to the Internet, a NovaRoam must be connected to a network that has direct access to the Internet. All other NovaRoams can use this networked NovaRoam as their gateway to the Internet. Additional steps, such as Network Address Translation (NAT), may be required.

Residential and business customers are free to choose any service provider connected to the network. The iTown design allows one large digital pipe to efficiently deliver services to each customer from many providers so customer options are increased by connecting to the network.

The web application within Project X 1.0 does not support connections outside the local network. However, there are some scenarios that would allow you access outside of the local area network. The Project X web application is hosted on your computer using the built-in Apache web server that comes bundled with OS X.

Start Simply Accounting Remote Access on that computer. Leave the software running as long as you want to access the computer. (While Outlook or Outlook Express must be installed and configured, neither has to actually be running on the host computer in most cases. See the note below for a notable exception.) Enter the User Name and Password you specified when you installed Simply Accounting Remote Access.

Enter the User Name and Password you specified when you installed Simply Accounting Remote Access and then click Login Yes. Any Outlook data you create, modify, or delete via Simply Accounting Remote Access is immediately reflected in your Outlook client on your computer

Yes you can have a LAN, however you will require an additional IP address for each computer that you wish to connect. For full instructions on setting one up please visit http://support.shaw.ca/networks/networksetup.htm While offensive material represents a tiny fraction of Internet content, any community of 50 million people will inevitably produce material others may find offensive. We believe the best solution is to put control over Internet content into the hands of our customers.

Either the remote end has disabled X11 forwarding (ForwardX11 No in the config file), or either the xauth command or the X11 libraries were not found when compiling the server. You need to set the hostname to the fully qualified domain name for this to work. Some Linux distributions set the hostname to the first part of the FQDN only. This is an incorrectly configured Linux system; do a "cd /usr/lib; ln -s libc.sa libg.sa" as root to remedy this. For Solaris 2.4, this s a kernel bug.

rndc: connection to remote host closed This may indicate that the remote server is using an older version of the command protocol, this host is not authorized to connect, or the key is invalid.

If you are being asked to connect to a remote mail box, click NO and then try to find out why GroupWise cannot find your mail box. The first thing to check is to make sure that you have a network connection. Try to access the web using either Netscape or Internet Explorer. If you CANNOT access the web, try the following: Check to make sure that the ethernet cable that runs from the wall to the back of the computer is plugged in tightly at both ends.

Be sure to name the originating host exactly as it was specified when the applet was loaded into the browser. That is, if you load an HTML page using the URL http://foo.state.edu/~me/appletPage.html then your applet will be able to connect to its host only by using the name foo.state.edu. Using the IP address for foo.state.edu won't work, and using a "shorthand" form of the host name, like foo.state instead of foo.state.edu, won't work.

I'm downloading my latest beloved movie using my favorite p2p, but when I play glob2, it is very slow. Can you fix this? I don't want to stop downloading the movie!