Your Unwired modem connects to your home network in the same way that an ADSL or Cable modem would connect. This normally occurs via an Ethernet or USB cable attaching your modem to a networking device, such as a router. You should follow the instructions provided with your networking device as Unwired does not provide networking support.

There are several methods for computer connection, but it appears that Ethernet 10BaseT is emerging as the most predominant method. Although it probably would be cheaper to produce the cable modem as an internal card for the computer, this would require different printed-circuit cards for different kinds of computers, and additionally would make the demarcation between cable network and the subscriber's computer too fuzzy.

The Unwired Modem is different from standard DSL or Cable modems traditionally used to connect to Broadband today. The modem utilises wireless technology and connects to Unwired Base Stations (towers) located around Sydney. Because it does not rely on a phone line or cable connection you do not have to wait to activate your service. Also, once you have signed up for your Unwired service you can use it from anywhere within the Unwired coverage area.

Yes, you can move your modem to any location within the Unwired network and obtain a connection. For updated coverage maps please refer to Unwired website. Unwired will work inside most buildings including flats. However if the building contains a lot of steel or thick cement walls you may experience difficulty receiving and sending a signal. In this case, we recommend you place the modem near a window. This will give you a better signal and assist you to obtain a better service.

Yes. Modest amount of remote dial-in access is available free of charge to members of the Whitman community through Whitman's pool of thirty-two 33.6kbps modems. To connect to modem, you must first request a remote access account via a web-based request form at https://secureserver.whitman.edu/dialin/. To ensure fair access to this limited resource, remote connections are limited to 4 hours per session and a maximum of 8 hours per day.

Refer to http://www.utoledo.edu/utnet for a step by step procedure. You may call the Service Request Line at 419-530-3644 for more information.

No, line-of-sight is not required to receive the Unwired service, only sufficient signal strength. The modem should be positioned in the most convenient location where the strongest signal can be received as indicated by the signal lamp on the modem.

Whilst the AViLYnX system uses the same distribution cable around the home as a computer network, they are not compatible systems. The AViLYnX does not transmit data in a digital format in the same way as a computer might carry data. Since the AViLYnX system is designed to distribute composite video around the system, it is unable to distribute UHF frequencies.

This is a common question because many things can cause this. First off, it is important to remember that while 56K is the theoretical limit a modem can connect on a normal analog phone line, NO modem ever connects at 56K. About the best a modem could ever achieve is 53K and a modem that connects at 40K or better in most cases is doing pretty well. Causes of slower connection speeds include: Unconditioned or poor quality phone lines.

The DSL modem is an external device that connects to your computer's network interface card (NIC) via a standard 10BaseT cable. Back to top Yes, but EarthLink will not provide network technical support. EarthLink will only provide technical support for the DSL line and the primary PC on which it was installed.

a. The modem connects to the computer with an Ethernet cable. The modems can be connected directly to a router, wired or wireless so you can share your system with the rest of the family.

When you sign up to Unwired broadband, you get a wireless modem, an Ethernet or USB cable and a quick start CD. Once you have completed setup and signed up to a plan and picked your activation option, you will receive instant internet access. All in under 5 minutes.

Quick Start One Page Guide; Quick Start CD; Power Adaptor; Unwired Modem; Connection Cord (USB or Ethernet)

You can purchase your Unwired modem online or via the Unwired Call Centre on 1300 761 881. You will need a valid credit card and you must be over 18 years of age. Your modem will be delivered by courier the next business day in most instances and you can nominate the most convenient delivery address.

The Ethernet modem does not require any software to be installed on your computer and therefore should work with any operating system. All that you need to do is to set up your Ethernet adapter to support DHCP. For Windows 98 and above and Mac OS 9 and above the Connection Assistant provided on the CD can do this for you. USB modems require software to be installed on your computer, which is provided on the Quick Start CD. This software is only available for Windows 98 and above.

CMU is maintaining the following telephone line for SLIP and PPP connection of users from remote locations: 412-268-9000 Windows 9x an later, Macintosh MacOs 8.0 and later: follow the standard instructions in your operating system to create a PPP connection using the above telephone numbers and the default settings. The TCP/IP settings should contain the nameservers mentioned here; the IP, gateway and broadcast addresses are established automatically after the modem connection is done.

The cable modem requires a Network Interface Card (NIC) to be installed in your computer. This card gives your computer an Ethernet connection that allows the computer and modem to communicate at high speeds.

To install the HGC-PowerCom modem is very simple. You only need to connect the Ethernet Cable to the back of the modem and onto your computer. (Ethernet cable is provided with the modem) Insert the power plug into the power sockets in your home and you are ready to connect to the HGC-PowerCom network.

Many factors influence your connection speed. Because modems use audible tones to communicate over analog voice telephone lines, they are very susceptible to phone line quality impairments. Such problems can make it difficult for the modems to hear the tones they are generating. These problems can exist anywhere along the path of your phone connection; in your home or office's wiring, at the phone company's central office and beyond.

The Federal Communications Commission capped the connect speed at 53K, and real-world access is generally in the 35-45K range for 56k modems. You may be dialing into a modem with a different 56k protocol than your modem. There are currently three different 56k protocols available: X2, 56k Flex, and v.90. The fastest, most reliable connections will be achieved when the two modems are using the same 56k protocol. You may not be using the appropriate modem initialization string.

Yes, a rechargeable internal battery is available for purchase. Batteries are sold separately via the Unwired website, or through the Unwired sales desk on 1300 761 881

Allways start with a complete power cycle or two and reboot the computer. Your computer might be broken, breaking, or glitching. Sometimes other people using your computer accidentally misconfigure it. You can check our "How to" section for instructions and try to set it up again if your a do-it-yourselfer. If you can't fix your computer, your more than welcome to bring it in to a repair shop. We have been doing computer repair for 13 years if you choose to bring it to us.

Check that the cable is connected between the modem and the telephone socket. There may be 2 ports for it to be connected to use the line port not the phone port. If necessary unplug it, then reconnect it. If you are connecting from your business telephone line you may need to dial a number to get an external line (usually 9).

Unwired uses wireless technology, not a phone line or cable outlet, to connect your modem to the one of the Unwired towers covering Sydney. This means that you do not require a phone line or cable outlet to access broadband with Unwired.

You can connect up to 4 PCs directly using wired connection and recommended up to 32 PCs using wireless connection.