How do you connect a subwoofer to a stereo?
Audio Speaker FAQ - WikiFAQ - Answers to Frequently Asked Qu...Many subwoofers contain their own amplifier and crossover. For these, take the preamp output and feed it into the subwoofer amp input and also into the main amplifier. For other subwoofers, just run them in parallel with your main speakers, or combine them into your system with your own bass amplifier and crossover. Some A/V receivers contain a splitter specifically for use with subwoofers.
Related QuestionsHow can I connect my active subwoofer to a stereo amplifier?
Magnat Audio Produkte GmbH - Home und Car Hifi - Lautspreche...Your subwoofer possesses a left and a right high-level input and you will need an appropriately long and thick normal loudspeaker cable to connect to your amplifier. Either connect the subwoofer to the same output terminals to which your speakers are connected. Doing so will mean that the speakers and the subwoofer will run in parallel in the low-bass range. Due to the fact that the subwoofer is high-ohmic, this will cause no problems where impedances are concerned.
Related QuestionsWhich should I use with my subwoofer, a mono or stereo cable?
HSU FAQ - Frequently Asked QuestionsThe vast majority of people should use a mono cable (connect it to the SUBWOOFER or LFE output on your receiver). Use stereo cables only with 2-channel stereo preamps.
Related QuestionsWhat is a subwoofer?
HSU FAQ - Frequently Asked QuestionsA subwoofer is a specialized speaker responsible for the most difficult duty in home theater. It produces the very deep, room shaking notes that add a magical effect and balance the sound. This requires providing lots of power to fill a room with sound, and large mechanical motions of the subwoofer. When you hear about Dolby 5.1, the ".1" refers to the subwoofer's special role in a surround sound system consisting of five speakers and (at least) one subwoofer.
Related QuestionsThe 990 has two "subwoofer out" jacks. Are they dual or stereo?
Outlaw AudioThe subwoofer outputs are dual mono, since low frequency information is mixed as a non-directional, mono signal.
Related QuestionsHow do I connect a powered subwoofer?
Energy SpeakersConnecting a powered subwoofer is extremely simple. Most of today's digital home theater receivers or processors have a dedicated "Subwoofer Output" connection (RCA or Low-Level). Simply connect a male to male RCA connector from the output on your receiver/processor to the subwoofer input on the subwoofer. If your receiver/processor does not have a subwoofer output, using speaker wire (high-level) from the Front Left and Front Right amplifier outputs is recommended.
Related QuestionsHow do I connect my iPod up to my home stereo?
IVCA Event Podcast & FAQEasy, all you need is a cord that is has two RCA connectors on one side and an 1/8th inch jack on the other. You can buy one at Radio Shack. You can get the fancy one that says it is for iPods for $30, or one that does the same thing but does not say iPod on it for $6 bucks.
Related QuestionsApple - iPod - FAQYes. Third-party stereo adapters are available for listening to your iPod music library using home stereo speakers. Compatible devices must be self-powered and support audio output through a 3.5-mm headphone jack. For optimal sound quality when using external speakers, set the iPod volume at less than half the maximum output and adjust your listening volume through your stereo controls. This prevents overamplification, which can cause distortion and reduced audio quality.Related Questions
Can the VSX 7000s subwoofer be used on my home stereo system?
Polycom VSX 7000s FAQNo. The subwoofer is designed specifically for the VSX 7000s unit and will not function when attached to other equipment.
Related QuestionsHow do I connect the digital box to my stereo TV and stereo VCR?
Cogeco - Customer Support - Digital Cable TV support - FAQ -...Please click here for a detailed downloadable diagram. (The file size is 88 KB and the approximate download time is two seconds for a 56K modem). The diagram for download is in PDF format and requires the Adobe Acrobat Reader for viewing and printing.
Related QuestionsCan I connect iPod to my home stereo and car stereo?
iPod Accessories FAQsYes! iPod will sound great on your home stereo and your car stereo. The only thing is that you must make use of iPod car accessory in order to connect to the amplifiers and speakers of your car stereo. iPod accessories are to be used while connecting the iPod to the home stereo too. These iPod accessories can be available in all car stereos or home stereo stores. We have a wide selection available for you to chose from.
Related QuestionsHow do I connect a wireless system to my home stereo?
Audio-Technica - Microphones, headphones, wireless microphon...Connecting a wireless system directly to your home stereo system is not recommended, because the voltage provided by the wireless system may not be strong enough to drive the input on your home stereo system. Most home stereo system’s line level RCA inputs require a minimum voltage of 300 mV, while the balanced and unbalanced outputs on all Audio-Technica wireless systems are providing much less.
Related QuestionsHow do I connect QChord to stereo speakers?
FAQs All about the QChordThe sound quality QChord delivers through its built-in mono speaker and bass port system is impressive. But you'll be truly amazed when you hear it in stereo. To connect to your own stereo system, you need a QChord Stereo Cable. Note that you are supposed to connect to your stereo amplifier, not directly to the stereo speakers.
Related Questionsd -How do I connect and set up a stereo cabinet with my amplifier/amplifiers?
Marshall Amps :: Frequently Asked QuestionsIf you are connecting a stereo amplifier or two different amplifiers to a stereo cabinet make sure the impedance and power handling of the cabinet matches your amplifier/amplifiers. If you are using our standard 4x12" this has two sockets and a selector switch on the back, setting this switch to stereo splits the cabinet into right & left. The two sockets will now have an impedance of 8 ohms with a power handling depending on the cabinet you have.
Related QuestionsHow do I connect my computer to my Sony changers and stereo system?
TitleTrack Jukebox Frequently Asked QuestionsWhen you purchase the "TitleTrack Jukebox Complete Package," you get most of the cables and other hardware required to connect an available USB port on your computer to your Sony changers and stereo system. You will need to purchase a USB to RS232 adapter.
Related QuestionsHow do I connect my stereo or tape deck to my computer?
Frequently Asked QuestionsTo do this you need a cord that will go between the two. The cord should have an 1/8 inch plug on one end and a stereo RCA adapter on the other.
Related QuestionsHow do I connect my iPod to my car stereo?
iPod FAQThere are several different accessories for this, including adapters designed just for the iPod, auxiliary input adapters, cassette adapters, and FM modulators and transmitters. For help finding the right accessories for you and your car, check out our guide to listening to your iPod in the car. back to top
Related QuestionsCan I connect the Jukebox to my stereo or home theater?
HelpYes, the jukebox has a line output on the back panel. You can find a suitable cable in our online store by clicking here.
Related QuestionsHow do I connect my turntable or stereo system to my PC's soundcard?
DART - Digital Audio Restoration TechnologyThe first step you'll need to take to get started recording is to set up your sound card's connection to the "outside world." There are many different types of soundcards and audio cards on the market, so the information we provide here can only give you general guidelines on how your connections will be made. Please be sure to refer to your sound device's printed or online documentation when setting up to record from its inputs.
Related QuestionsHow do I connect my Bluetooth Stereo Headset to my SPL?
FAQ - SPLFirst, you must put your headset into "Visible/Discoverable" mode so that the SPL can find it. Check the user manual of your headphones to find how to do this. Enter the passkey to bond the two devices. Typically the passkey is 0000 , but refer to your headset's user manual to find out what the code is. Press "Next" when you have entered it. After switching off and on your SPL or your Stereo headset, you may find that you need to re-assign the Stereo Service.
Related QuestionsHow do I connect my Bluetooth Stereo Headset to my Smartflip?
FAQ - SmartflipFirst, you must put your headset into "Discoverable" mode so that the Smartflip can find it. Check the user manual of your headphones to find how to do this. After a few seconds, the name of your headphones will be displayed. Highlight their name and press the 'Next' key. Enter the PIN code to bond the two devices together. Typically the passkey is '0000', but refer to your headset's user manual to find out what the code is. Press "Next" when you have entered it.
Related QuestionsCan I connect a passive subwoofer to the Bass Module Output?
L1® Model I / FAQ - Bose L1 Encyclopedia FAQ & WikiNo. We do not recommend that you connect anything except the B1 bass module to this output, as the internal amplifier and B1 bass module(s) are designed to properly equalize the system when connected. However, you may utilize the Bass Line Out connection to feed a powered subwoofer or additional amplifier.
Related QuestionsHow can I connect my passive subwoofer to a Dolby Digital amplifier?
Magnat Audio Produkte GmbH - Home und Car Hifi - Lautspreche...Your passive subwoofer is suitable for reproducing lowest frequencies and may be used both in normal stereo and in home cinema systems. When using it with a stereo amplifier, connect the amplifier's outputs to the subwoofer's inputs. Use loudspeaker cables with a thickness of between 2.5 to 4 mm² depending on the length required. Make sure that the poles on the connections are correct and that the channels have been properly assigned. Connect the subwoofer's outputs to the satellites.
Related QuestionsWhich subwoofer will sound the loudest?
Subwoofers Frequently Asked QuestionsIf you're looking for the sub that will deliver maximum SPL (play loudest), you need to consider sensitivity, enclosure type, and available power. Start with a subwoofer with a high efficiency (sensitivity) rating housed in a ported or bandpass box. Next, power the sub with an amplifier that has a power output that is within your sub's recommended power range (preferably in the top third of that range). You'll achieve the slam you're listening for.
Related QuestionsWhich subwoofer will sound the deepest?
Subwoofers Frequently Asked QuestionsTo experience the lowest possible bass tones, select a large woofer designed for use in a sealed box. This type of enclosure is your best bet for driving your frequency response down. Ample wattage is also a must if you want to hear those lowest bass notes. A woofer with a very low frequency response spec can help deliver extremely low notes. Additionally, larger woofers, because of their size and excursion capabilities, often have the ability to play deeper than smaller woofers.
Related QuestionsWhat's Poly-Fill and how will it affect my subwoofer's sound?
Subwoofers Frequently Asked QuestionsYou're probably already familiar with Dacron polyester fiber-fill, or Poly-Fill — chances are you've slept on a pillow stuffed with this material. But you may not realize how Poly-Fill can help your bass. Stuffing your enclosure with the right amount of Poly-Fill can make your box behave like it's larger than it really is. This comes in handy if the volume of the box you've built turns out to be a hair shy of the cubic air space recommended for your subwoofer.
Related Questions