We can fix most pinball machines, regardless of origin. For a cost effective repair we would suggest that you phone us with a description of the problem(s). You can also e-mail us through the Contact Us page on this website. Many electronic machines can be repaired by sending circuit boards for repair, and this is usually the cheapest course of action. By talking the problem through, we can assist in determining whether a board repair will be likely to fix your problem.

If both of your lamps went out at the same time, then most likely your bulbs are fine and you need a new ballast. Please contact us for information on ordering a replacement ballast. If only one of your lamps went out, then that is easily replaced. First, swap the lamps to make sure it is the lamp that is out and that the socket isn't bad. If the lamp still works, then you will have to send your unit in to have the socket replaced.

What is the story with GO.com? It has been down for quite a while now, and I am wondering if you are ever going to get around to making a fix for it as you said you were going to do.

made after 1978) pinball game. Older games (pre-1978), also know as "EM's" or Electro-Mechanical" machines are cherished for their history and retro 60's looks, but can be, and

couple of years or more, and perhaps every 3 - 4 months or more if it is being used in a pay (commercial) environment. This type of maintenance includes interior and exterior cleaning

No. Most modern pinball machines have a "free play" function that allows the game to be played our more "enterprising" customers have actually paid for their game in just a year or so by

How do I contend with "endian" issues when moving binary data from, for example, linux/x86 to AIX/pSeries (like the ESMF).

When the "Facade Settings" pages are used to make changes to Facade, the current home screen will be shut down and reloaded so that the changes can be seen immediately. On very rare occasions WM5 does not seem to like this, resulting in a non-functional Start button. The solution is to reboot the phone, either using the "Reset" button from the Facade launcher bar, or by using the power button to turn the phone off and then on again.

It depends on which game you have and who made it. There is no hard and fast rule on finding serial numbers unfortunately. Some were stamped into the wood, some applied with stickers, others handwritten on the cabinet in various places. Since there are too many manufacturers and game modesl to list and track, we have created a section of the site dedicated to helping pinball machine owners find the serial numbers on their games. Please visit the Finding your serial number page for more info.

Ruby and Sapphire have a small bug in the program that prevents berries from growing and other time-related events from working. This is called the Berry Glitch. To fix it, connect your game with Pokemon Colosseum, FireRed or LeafGreen. Go to the title screen. Now press SELECT + B and now, start Ruby/Sapphire, but make sure you press SELECT + START while you are starting it up. Now the game will update the Berry program. All content ? 2002 Psypoke. All Rights Reserved.

This is an old known problem. The odometer gear which drives the 1/10 mile splits thus no longer engages the shaft to the 1/10 mile digit wheel. You can glue it back with epoxy (after you spend some prime time behind your dash removing the speedometer and opening it up). Hints on removing: A2's are a lot easier than A1's. The hardest part is unscrewing the speedo cable. Try taking the lower dash covers off and put your hand up from the bottom.

ADDAPT relies on Microsoft's mdac_typ (you are required to run this program for NT and some 98 installations) program to install the latest Active X components. If an older program stops working properly, you should contact the producer of the program for an update. The registered Microsoft components that ADDAPT uses are as follows: To correct this problem, go to the Start -> Settings -> Taskbar and click on the Start Menu Programs Tab.

The ETA is actually a cartridge too. It relies on oil, just like your rebound / compression cartridge. Therefore, if the oil height is too low then the cartridge can suck in air into the cartridge which causes issues. This can also happen if you change the oil in the ETA side but forget to "prime" the cartridge with oil by cycling the cartridge rod several times.

The problem is related to the limits SP2 for Windows XP puts to the number of TCP connections a P2P program can make.

Chances are you had a power outage or spike that caused the phone system to default, or someone made a programming change on your phone. Press feature button and then * and 0 key on your touch-tone pad. Then press button that is not functioning. The display will show what the system has programmed on that button. This probably will not match what you're trying to use it for, so you will need to have someone re-program it. Check with your manager to see who does the programming for your system.

There may several reasons why a radar is not in operation but primarily will be due to either a part that has failed or it is just routine maintain. Check the Status reports page of the Dopper radar. These are messages describing the anticipated time the radar is to be out of service.

We do provide free technical telephonic support for items bought from our site. If you have contacted us with regards to the non-working item you can return it to us for a replacement. Please ensure that the item is within its warranty period and that you have all necessary boxes, drivers and documents. The returning of the item to us will be at your own expense however we will gladly pay for the swapped out items delivery back to you.

We will accept a machine for repair up to a year since the date of purchase, so the machine must be less than one year old. We do not guarantee that the machine is fixable. If the machine is repairable, a $30 fee plus shipping & handling will be charged. Please send your machine insured (for tracking purposes) to KP Beauty Products, Attn: Repair, 1968 W. Holt Ave., Pomona, CA with the following information: 1. Copy of the invoice for that machine 2.

Download managers increase your download speed by connecting to the server multiple times. Doing this does not significantly increase download speeds but dramatically hurts the performance of the server. If you wish to use queue to download from the HTTP servers, be sure you set your download program to only use one connection at a time.

The microphone for the RA 27, RE 14 and RE 27 is not a serviceable item. Although delicate and very accurate it is quite affordable to replace in the event yours is broken or missing. Just contact the Parts Department and tell them you wish to order a replacement analyzer microphone, (a k a MIC 1; no fancy part number needed here.)

Generally if your brake stopped working entirely, you have an electrical problem. This is most likely a failed switch (probably a fuel pump or clutch switch). You can usually confirm this by hot-wiring the brake, bringing battery power directly to the solenoid leads (with the engine at idle). Be sure to disconnect the existing leads to the solenoids so that you do not damage your control system. If the brake does not operate when hot-wired, you may have a solenoid failure.

Start -> Settings -> Control Panel -> System and Maintenance -> Problem Reports and Solutions -> View Problem History -> Then double-click on the COM surrogate error. Then have a look at the 'Fault Module Name' item. If you got an old version of DivX installed, then uninstall that. If you get the problem with the DivX version that is included in the pack, then disable it with the Codec Tweak Tool. Use ffdshow instead to decode DivX video.

Some browsers (such as MSIE-4) can be configured to dial your ISP automatically when you click on a link, but this feature (called "automatically connect" or "autoconnect") gets disabled if you specify a proxy running on your own computer (with address localhost or 127.0.0.1) because these addresses don't require dialing. The Internet Junkbuster knows nothing about dialing, so it doesn't work. To make automatic dialing work, make up a name such as junkbuster.

In case your download isn't working or you have some issues downloading, here are some tips to help you. Turn off all other internet applications. Leave your connection available for your download only. Some lesser quality connections will benefit from this. Depending on your connection speed and your computer's hardware, multitasking while downloading may not be a good idea.

Try to use the machine without extension cord. If it works, replace extension cord with either 25 feet 12/2 gauge cord or 50 feet 10/2 gauge cord. Unplug power, turn off water source, and allow unit to cool down over half an hour. This will re-set circuit breaker. It is normal that the machine is making sound when you turn on the machine. It is because the machine is building the pressure inside. After the pressure is built, the machine will not make sound until the gun is triggered.

Call 800-444-3299 and talk to one our representative. Aminian will place a service call to correct the problem on-site if possible, otherwise we will ship you a new unit without any additional charges. Customer is responsible for any service call that is caused by improper setup or customer error. Please read and follow the manufacturer's set up and installation procedures accordingly.

A That depends on the age and condition of the game. For newer games the operators tend to set the prices based on how much money the game has brought in. For older games the collectors tend to set the price which is based primarily on game condition (playfield, backglass, cabinets) and collectible value (themed games like Playboy, Kiss, Star Trek, etc) tend to sell for higher prices.

A new version of the QuickTime MPEG-2 Playback Component is now available for Mac OS X users. This new version includes performance enhancements and is required for compatibility with QuickTime 6.4 or later. As a past purchaser, you can download it free of charge through your Apple Store account. Just visit the Apple Store and click “Your Account” in the store menu.