Can I change a high pressure sodium fixture to a metal halide and vice versa?
Yes you can. You will need to change out the ballast, capacitor, ignitor and lamp. However, there are several cautions that must be taken: the metal halide wattage must be within the fixture limitations; the socket position may need adjustment; the reflector may be different or the ballast strapping may not fit properly. Please contact the factory for a specific product.
Related QuestionsWhat is the difference between High Pressure Sodium and Metal Halide?
Frequently Asked Questions - Greentrees HydroponicsThe difference between these two types of HID (High Intensity Discharge) lights is the color spectrum that is emitted from each. The High Pressure Sodium bulb emits light that is concentrated in the red to yellow side of the spectrum and are weak in the blue-violet end. While the Metal Halide bulb emits light that is very balanced and contains all the energy peaks at wavelengths of the visible spectrum.
Related QuestionsGreenCoast Hydroponics - FAQAlthough High Pressure Sodium and Metal Halide are both types of HID (High Intensity Discharge) lights, they emit different color spectrums. High Pressure Sodium bulbs emit very bright light that is concentrated in the red to yellow side of the spectrum and weak in the blue-violet end. Metal Halide bulbs, by contrast, emit a very balanced light, which contains all the energy peaks of the visible spectrum. Both types of lighting have their place in an indoor growing environment.Related Questions
What type of light is better, High Pressure Sodium or Metal Halide?
GreenCoast Hydroponics - FAQFirst, what type of natural light are you working with? When supplementing natural sunlight, use a High Pressure Sodium bulb to extend daylight in the early spring and fall. You can also use them on low light cloudy days. When no natural light is available at all, a Metal Halide bulb is most frequently used, , which is a very wide spectrum bulb perfect for indoor growing. Halide lights are excellent for vegetative growth for leafy plants like lettuce and basil.
Related QuestionsWhat is the life cycle of Metal Halide and High Pressure Sodium lamps?
GreenCoast Hydroponics - FAQMetal Halide lamps should be changed at least every 6 to 12 months if you're burning them 18 hours per day. High Pressure Sodium bulbs, burned at 12 hours per day, will last between 6 months and a year and a half depending on the bulb.
Related QuestionsWhat is the difference between Metal Halide and High Pressure Sodium lighting systems?
Hydroponic FAQAlthough both types of lighting systems appear very similar, the main difference becomes readily apparent when you turn them on. A Halide system emits a balanced white light similar to the spectrum of sunlight. This type of light promotes vegetative growth. A Sodium system emits a light spectrum and gives off a warmer colored light. This type of light helps stimulate a plant to produce flowers and fruit.
Related QuestionsWhat is the best light to use, High Pressure Sodium or Metal Halide?
Canadian Xpress - Fusion Nutrition SpecialistsIn our controlled trials, we found that High Pressure Sodium (versus Metal Halide) when used for an entire crop cycle, slightly but noticeably out performed Metal Halide. We have also found that High Pressure Sodium gives a marginally better yield if it used for the bloom phase and the Metal Halide performs slightly better during growth. Our results would not justify purchasing both the lights for growth and bloom but this may not be the case with all species and strains.
Related QuestionsWhy do people use a Metal Halide for vegetative growth and High Pressure Sodium for flowering?
GreenCoast Hydroponics - FAQThere are a couple of reasons growers switch between bulbs during different stages of plant growth. First, Sodium bulbs can make some plants grow "leggy" and stretched out due to the high yellow to red spectrum they give off. Halide bulbs tend to keep plants "tighter", with less space between internodes.
Related QuestionsCan I order a piece on your site but change the metal from silver to gold or vice versa?
Bernardine Fine Art Jewelry FAQsYes, That is usually not a problem and I can use white or yellow gold in either 14K or 18K instead of sterling silver. There will usually be a slight difference in the stone size or shape since they are all custom cut for the piece, but I will be glad to discuss this in detail with you. Also, many pieces shown on my site that are made in gold can also be custom ordered in sterling silver. Please contact me .
Related QuestionsCan I change from a standalone license to a network license (or vice-versa)?
Gene Codes Sequencher 4.8 Frequently Asked Questions (FAQ)Yes, you can always upgrade a standalone license to a network license or revert your network license to a standalone.
Related QuestionsCan I change from a Mac license to a Windows license (or vice-versa)?
Gene Codes Sequencher 4.8 Frequently Asked Questions (FAQ)Although you have cross compatibility between Macintosh and Windows versions of Sequencher, these are two separate software programs so we can not offer an exchange between the two applications.
Related QuestionsCan You Link To My Site And Vice Versa?
Frequently Asked Questions (FAQs)...The site is based on the binding principles of 'free to use' 'ad-free' and 'impartial'. That means the only sites linked to depend on editorial recommendation; we simply don't and won't do reciprocal links. You are more than welcome to link to MoneySavingExpert.com provided it doesn't appear that we are endorsing the product. For more information on how the site generates revenue read How The Site Is Financed.
Related QuestionsWhy do people use Metal Halides for vegetative growth and High Pressure Sodium's for flowering?
Frequently Asked Questions - Greentrees HydroponicsMany people switch between bulbs for different stages of growth for a couple of reasons. First of all, Sodium bulbs have been known to make some plants grow leggy and stretched out because of the yellow to red spectrum that they give off. Metal Halides tend to keep these plants tighter with less space between internodes. So some growers use the Metal Halide lights during vegetative growth to keep the structural growth of the plant nice and tight.
Related QuestionsCan I change the insert on my Seamaster from blue to stainless steel, or vice-versa?
Omega FAQ - TimeZoneYes you can, but it is a tricky job. Most watch makers will tell you that you should buy a new bezel, because if the insert gets bent while installing the new one, it will put a permanent white line on that bezel insert. If you want to change the color insert, send your watch to an Omega service center near you.
Related QuestionsIf a house is shown with siding or stucco, can I change it to brick or vice versa?
Answers to House Plan Home Plan Blueprint Frequently Asked Q...Yes. If brick is being added to a house, you will have to make modifications to the foundation to create a brick ledge. If brick is being removed, the ledges on the foundation plan will not be required. Most exterior finishing changes can be made easily without causing problems. You may want to check with a building professional to discuss the changes you want to make.
Related QuestionsCan I change from being a photographer to a purchaser and vice versa?
Buy and sell photos online at VizeroNo, it is not possible for members to change their status from the photographer to the purchaser and vice versa. The systems have been purposefully streamlined with the type of needs of each group in mind. Should you accidentally have chosen the wrong user type, please contact our membership team for assistance. We will then delete your existing account, to allow you to sign up again for the correct user type.
Related QuestionsHow do I change a Heading to a Topic and vice versa?
Fast-Help Frequently Asked QuestionsOn the "General" tab, use the "Page Type" combo box to select a Heading or a Topic and the changes are made.
Related QuestionsWhat are the advantages of earmuffs over earplugs and vice versa?
Frequently Asked QuestionsEarmuffs are easier to use correctly, and therefore provide attenuation that is much closer to the laboratory derived NRR. Earplugs are hard or sometimes very hard to insert correctly, and therefore often do not provide the same attenuation in the field, as they do in the laboratory. This is the reason that NIOSH recommends different de-ratings for earplugs and earmuffs. You can read more about this subject by clicking on this link.
Related QuestionsHow can an MSVC program call a MinGW DLL, and vice versa?
MinGW - Frequently Asked QuestionsAssume we have a testdll.h, testdll.c, and testmain.c. In the first case, we will compile testdll.c with MinGW, and let the MSVC-compiled testmain call it. You should use gcc -shared -o testdll.dll testdll.c \ to produce the DLL and DEF files. MSVC cannot use the MinGW library, but since you have already the DEF file you may easily produce one by the Microsoft LIB tool: lib /machine:i386 /def:testdll.def Once you have testdll.lib, it is trivial to produce the executable with MSVC: cl testmain.
Related QuestionsCan I have marble on the onyx faucets and vice versa?
Frequently Asked QuestionsThe lever handled marble series is cut in a larger, heavier size than the lever handled onyx series. Phylrich receives these stones pre-cut and pre-polished from Italy.
Related QuestionsIs Dell better than Gateway (or vice versa)?
TSC | FAQ - Frequently Asked QuestionNo - Dell and Gateway are the top both top level computer manufacters, and both have special agreements with WVU, so it's a matter of preference. In terms of service and support, Dell has a slight upper hand. All Dell machines that the TSC recommends have a 3 year, Next Business Day, Onsite warranty, and the laptops have the additional CompleteCare coverage. Gateway's warranty is 3 years as well, but the coverage is limited.
Related QuestionsCan I put Capture/Cascade over High Sierra and vice versa?
Log Home Resource CenterYes, the surfaces need to be clean and sound, with all other appropriate application procedures followed.
Related QuestionsQ: Why would someone choose a metal seal system over an elastomer seal system and vice versa?
MDC Vacuum Products. - Products FAQ'S- Flanges and FittingsA: The main reason for choosing a metal seal system is in the level of vacuum that can be achieved. Elastomer seals allow air and other gases to permeate through them faster than through copper, and therefore are restricted to high vacuum applications. Metal seals have lower rates of permeability and can be baked to higher temperatures than elastomers, and are therefore used for ultrahigh vacuum applications.
Related QuestionsDo metal halide lamps have special cooling requirements?
UV Curing Lamp FAQGallium and multi-spectrum lamps have cooling requirements fairly equivalent to mercury lamps. Special care is required for iron lamps. If an iron lamp overheats, the iron will irreversibly become part of the quartz tube. This will not cause lamp failure but you will lose the iron portion of the UV spectrum.
Related QuestionsWhy Are These Metal Halide Kits More Expensive?
DIY Video Projector FAQ - DIY Projector CompanyYou may have noticed that our metal halide light kits are more expensive than other models available online. The reason is that our light sources utilize HQI and electronic ballast technology. Less expensive kits use core-and-coil technology, which causes the annoying "buzzing" sound that you are used to in parking lots.
Related QuestionsIs Laser Hair Removal Safe After Electrolysis Treatments and Vice Versa?
The Society for Clinical & Medical Hair Removal, Inc. | ...It is safe and even recommended because laser will not affect the blond, white or red hair. Many people have hair of almost every color in some areas. It is common for a client to combine the treatment modes for the sake of times saving. It is common to continue with electrolysis on the light and choose laser for the dark hair.
Related QuestionsHow do I convert a common date to a Jewish date or vice versa?
Frequently Asked QuestionsSimply use the dropdown lists to specify the common or Jewish date that you want. That's it -- no "compute" button to press. The answer will appear instantaneously in the other fields.
Related QuestionsCan scientists use animal stem cells in humans and vice versa?
Graduate School of Biomedical Sciences | Stem Cell Research ...We are unaware of experiments that place animal stem cells into humans. Research studies are ongoing where human stem cells are placed into animals. However, the studies are only experimental and they are performed under strict regulation by the participating institution. The facts gained from these experiments will provide valuable information for future therapies using stems cells. Hopefully, these experiments will pave the way for getting stem cells to the bedside of patients.
Related QuestionsWhat are the advantages of a CF200 drysuit vs. a FLX50/50 drysuit and vice versa?
DUI - Diving Unlimited International Virtual Customer Servic...The patented crushed neoprene used for the CF200 is the most durable material available for drysuits. It is so tough we use it to make kneepads and boots for our other suits! Given this ruggedness the material is heavier than other fabrics. Although totally dry inside, the outer nylon layer absorbs water making it heavier still when wet, and requires about as long as a wetsuit does to dry.
Related Questions