Windows 98/ME/2000/XP might not detect the PC Card if a previous installation of the PC Card was cancelled before it was finished. Remove the previous driver, and redo the installation again.

In the list you get, click on "Sound, view and game controllers". If you don't see anything related to SOUND, click on "Refresh". The detection will start. If you still don't get anything related to sound, Bad luck... : (. You don't have it.

The simplest way to check your graphic card is to have DirectX 9.0a installed. You can find the latest DirectX at (http://www.microsoft.com/directx).

This problem is solved in recent Cygwin/X releases. Use cygwin setup to upgrade the xorg-x11-xwin package. The older X11 releases on the various commercial unices define the AltGr key as ModeSwitch, MetaR, AltR or similar. Cygwin/X expects it to be ISO_Level3_Switch. For reasons unknown to us this is reset when loggin into the remote host. As far as we don't have access to such a machine we are unable to track this down and find a reason.

The quickest way to find this information is to right-click on the "My Computer" icon on your desktop and then left-click on "Properties". The "General" tab will contain the name of the MS Windows version installed on the PC, e.g. "Windows 2000 Professional".

RAT4 uses locally scoped multicast to communicate between the user interface and the media engine. On Windows machines without a network adapter a loopback adapter needs to be installed to enable locally scoped multicast to work. Select any MS Loopback adapter and configure with an IP address, and do not configure DHCP, WINS, etc. Restart the machine and bingo!

Once an order is placed you can expect to wait 4-8 weeks for installation. This is predicated on first come first serve basis. Typically the warmer months have longer wait times.

A wooden or vinyl buck is built to the desired rough opening size and incorporated into the AMVIC wall as it is being stacked prior to pouring the concrete. Once the concrete cures, doors and windows are installed as usual into this opening.

The following files are installed to the Windows/System directory (or updated when they already exist) when STATISTICA is installed and are also used by other Windows programs: In Windows Explorer, go to ENGLISH\MULTIMED subdirectory on the CD and copy MULTIMED.INI file to the directory on your computer where STATISTICA has been installed.

ActiveSync works with Windows XP SP2 or earlier. You must install Windows Mobile Device Center on Windows Vista.

Netopia does not support having both Timbuktu Pro and PC Anywhere installed on the same machine, nor do we recommend attempting to have both applications installed. Netopia strongly recommends that PC Anywhere be completely uninstalled from any machine prior to installing Timbuktu Pro. Timbuktu Pro will abort the installation if it finds PC Anywhere installed.

Windows Media Player is available for the Windows, Windows Mobile, and Mac operating systems. Use the information in the table to find the Player version that provides the best digital media experience for the operating system that you have. http://www.microsoft.com/windows/windowsmedia/player/versions.aspx

Windows 98 includes a hidden, unsupported tool for viewing hardware information. To launch it, enter this command from the "Run" dialog in the Start Menu: hwinfo /ui You'll see a list of all hardware devices in the PC, including driver files and registry entries related to each device. However, this officially "unsupported" tool isn't perfect: it will sometimes list errors for devices that are working just fine. Still, it's a good way to get a quick snapshot of the system's components.

Listed below are competitor products that will prevent individual components of CA Internet Security Suite 2007 from installing if they exist on your PC. During the installation process, these components will be identified at which time you will have the option to remove them from your PC. Failure to remove any competitor security components could prevent installation of CA Internet Security Suite 2007.

Most of the time, Xmod would be detected as a default. However if it is not, please follow the steps below. Connect speakers or earphones as described in your Creative Xmod User's Guide to enjoy the X-Fi™ experience! After you have connected Xmod to your computer, you may need to set Xmod as your computer's default playback and recording device. Click Start -> Control Panel -> Sounds and Audio Devices. The Sounds and Audio Devices Properties dialog box appears.

This means that Windows is having a problem finding your modem. When this happens, reboot your computer and try to connect again. If you receive the message again, it is possible that the drivers for your modem may be improperly installed. Try reinstalling the drivers. Most often, the number your dial-up connection is dialing is input improperly. Check the number it is dialing. Our access numbers are available here.

Just one, as long as you explain it's Plug-N-Play... they get confused if it doesn't come with a driver disk.

A: You can use the PocketMap Data Browser application to remove any data you've installed to your Pocket PC or Storage Card. On your Pocket PC, tap Start->Programs->"PocketMap" Folder-> PocketMap Data Browser. There are 3 tabs: "Map Data", "POI Data", and "Highway Grid". Select a tab, and it will show a list of what's installed. Highlight an entry in the list, and tap <Remove>.

Not likely, WiSentry performs its operations in passive mode, passing normal network traffic. An intruder will have trouble verifying that there is a monitoring and detection system installed.

If your company employs an MIS manager or systems administrator, and you are uncertain if the virus resides in your computer memory or on a floppy disk, leave your PC on and immediately notify them of a possible problem. They will be able to best evaluate how to proceed. If you suspect the virus is residing in your computer memory (RAM) and you are connected to a network, immediately turn off your computer and notify your MIS manager or systems administrator.

In order for your PC to acknowledge the EzClone, you must firs press the "RUN"button for approximately 5-7 seconds. Once all three LED lights on the front panel of the EzClone light, you may then connect it via USB. This step ensures that the EzClone is switching to Exteranl Writer Mode. If it still does not work, make sure the USB Storage driver was installed for a Win 98SE system. Or try another computer to verify that there is any driver which was mistakenly removed.

Windows XP's drivers are basic ones that just allow you to manipulate the desktop (and possibly DirectX also). You have to get updated XP drivers from your card's manufacturer. Riva TNT, TNT2, Geforce cards can try nVidia's Forceware drivers. dfx has closed down. Fortunately, some geeks have hacked (or tweaked) 3dfx's original drivers to make it compatible with Windows XP.

Yes, but not directly. You can create a hidden TrueCrypt volume in which you later place a disk image containing an installed operating system that you run (boot) under virtual-machine software, such as Virtual PC, VirtualBox, or VMware (VirtualBox OSE is free and open-source; Virtual PC and some editions of VMware are free). That way, you can have Windows installed in a hidden volume.

A wooden or vinyl buck is built to the desired rough opening size and incorporated into the AMVIC wall as it is being stacked prior to pouring the concrete. Once the concrete cures, doors and windows are installed as usual into this opening.

There are two ways you can determine which version of Windows Media Player you have installed: Press the F1 key anywhere on the Windows Media Player window. The version displays. Press the Alt key anywhere on the Windows Media Player window. The standard menu bar displays. Then click on Help and About Windows Media Player.

proper installation is vital, window installation is not a typical do-it-yourself task. SB Window's value-added installation insures a quality job done right the first time.

Yes. However, Exceed 6.2 or 7.1 or newer with Exceed 3D must be installed on your PC. Exceed is a X-server package for Windows. Exceed 3D extends the X-server with the remote GL library. Remote GL allows hardware support on the local PC box. Abaqus CAE has not been certified with other freeware X-servers for Windows like CYGWIN though you can try to download and use them on your own. Abaqus CAE should be displayed fine on all UNIX workstations, including Linux with remote GL support like Red Hat

Sooner or later, most people who own an S-100 system need to transfer a file to or from a DOS or Windows (or Macintosh or whatever) computer. A Google search of comp.os.cpm "groups" will find a discussion of this very topic that last occurred in early 2003. It's an old topic. Most people who need to establish serial file transfers to or from a CP/M system (or N* DOS system) of ANY sort end up doing something like this: get a SIMPLE file transfer program onto their CP/M system.

IOMega ZIP drives and ZIP disks may offer you a way to move megabyte-sized files from old Macs to new Macs, or from your Mac to a Windows/Pentium PC. Check my Web page for Mac hard drives, the ZIP drive section via this link for the ZIP drives I offer. I have drives for old Mac internal or external use, and for Windows systems too. For a bit more discussion, check the discussion above on recovering files from drives.

First, you will have to get an X-Windows server set up on your PC. Many people are using Xceed for Windows, or MacX for the Macintosh to do this. Next, you will have to set your DISPLAY variable as above, to your desktop PC. The command should look something like this: This command should have your machine's name, or IP number in it before the colon (:).